List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase II 1998 Department of DefenseNavy
  2. Co-Injection Resin Transfer Molding (CIRTM)

    SBC: ANHOLT TECHNOLOGIES, INC.            Topic: N/A

    Shipboard structures employing composites typically use glass/vinyl ester (VE) manufactured with vacuum assisted RTM. This composite system offers reduced weight, no corrosion and improved signature performance but lacks the fire performance characteristics required for shipboard use. Phenolic resins (PH) provide outstanding fire performance but are difficult to process and offer lower structur ...

    SBIR Phase I 1998 Department of DefenseNavy
  3. Real-Time and Fault-Tolerant Open Architecture for Combat Systems

    SBC: Applied Research Associates, Inc.            Topic: N/A

    We propose to develop a layered real-time and fault-tolerant CORBA-based software architecture as a means to realizing an open standards-based middleware for Naval combat systems. The key features of our approach are (1) a low-level interface to a distributed network infrastructure consisting of an integrated real-time and fault-tolerant extension to CORBA patterned after existing and emerging COR ...

    SBIR Phase I 1998 Department of DefenseNavy
  4. High-Rate Single Event Combustion Diagnostics

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Applied Research Associates, Inc. (ARA) proposes to develop a high-speed optical pyrometer which can be used on impact tests of reactive materials with metal plates where flash radiography equipment is in use. The unit will measure five narrow spectral bands of light and use their ratios to determine the temperature of the area of interest. It will also utilize an internal video camera to allow ...

    SBIR Phase I 1998 Department of DefenseNavy
  5. Non-Fouling Ultrafiltration Membranes

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Ultrafiltration membranes offer great potential for compact, low cost clean-up of Navy surface ship graywater and blackwater. A major limitation of these ultrafiltration membranes is significant loss in flux with time associated with membrane fouling from proteins, polysaccharides, and other waste products. Backflushing can only be used to a limited extent. Chemical treatments are undesirous si ...

    SBIR Phase I 1998 Department of DefenseNavy
  6. A Novel Software/Hardware Hybrid System for Advanced Ejection Seat Control

    SBC: Continuum Dynamics Inc            Topic: N/A

    An innovative combination of key contributors to ejection seat/capsule aerodynamic modeling, controller and sequencer design, and biodynamic simulation are to be integrated under the framework of a commercial software simulation tool for this Phase I project. The use of a commercial simulation package enhances the cost effectiveness of the software development, since support of graphics capabilit ...

    SBIR Phase II 1998 Department of DefenseNavy
  7. Frequency Selective Filter/Switch

    SBC: ELECTRO-RADIATION, INC.            Topic: N/A

    The project examines the concept of frequency selective antenna management and supplemental transmit antennas on tactical aircraft which allow continuous jamming and support maneuvering. The project examines tactics and coordinated techniques responding to crew actions and cueing techniques to prompt optimized maneuver synchronization. Phase 1 identifies the threats, the techniques, and estimate ...

    SBIR Phase I 1998 Department of DefenseNavy
  8. Hardness Validation by Verified Analysis (HV2A) Methodology for Advanced Materials

    SBC: KTECH CORP.            Topic: N/A

    Ktech proposes to develop a HV2A methodology for the assessment of nuclear weapon effects on new materials that are candidates for inclusion in strategic and tactical military systems. The methodology (1) provides an estimate of the system requirements and operation environments for each application specific material/structure, (2) establishes the critical response modes, (3) provides a framework ...

    SBIR Phase I 1998 Department of DefenseNational Geospatial-Intelligence Agency
  9. Collaborative Systems Engineering Workbench and Network

    SBC: MANAGEMENT SCIENCES INC            Topic: N/A

    The Virtual Engineering firm is a reality, with a team of scientists and engineers scattered at home sites working together to solve tough engineering problems. This SBIR will perform research and development to provide collaborative system engineering tools for network engineering projects. We will explore new directions for collaborative systems engineering (SE) that enable distributed req ...

    SBIR Phase II 1998 Department of DefenseNavy
  10. Multi-dimensional, user-oriented synthetic environment(Muse): A standard synthetic environment system for virtual prototyping

    SBC: MUSE TECHNOLOGIES, INC.            Topic: N/A

    We propose to develop a simulation system that integrates CAD/CAM/CAT tools into a Virtual Manufacturing Environment, and to demonstrate the proof of concept. The proposed system will be based on the demonstrated functionality of Multi-dimensional, user-oriented Synthetic Environment, UuSE (pronounced "muse'). Developed at Sandia National Laboratories by UuSE Technologies, Inc. (principals a ...

    SBIR Phase II 1998 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government