You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Intelligent, Adaptive Research and Training Platform for Individual and Team Training, with Web Capabilities and Applications

    SBC: 21ST CENTURY SYSTEMS, INC.            Topic: N/A

    In an information-rich environment, the possibility of enhancing the decision-making processes and outcomes is closely tied to the proper and timely management and analysis of information. In a team decision making environment coopertion, communication, collaboration, shared situational awareness and mental models become critical parameters for success. Computer technology, hardware and software ...

    SBIR Phase II 1998 Department of DefenseAir Force
  2. An Innovative, Java-Based Tool Suite for Visual Failure Management in Large-Scale, Complex, High Assurance Systems

    SBC: 21ST CENTURY SYSTEMS, INC.            Topic: N/A

    21st Century Systems, Inc. (2CSI, formed April 1996) proposes a tool suite which will combat architectural design errors in large-scale, high-assurance systems through systematic and intelligent simulation and modeling of alternate designs. The suite will feature a wide range failure analysis, identification, isolation, correction and management tools, and will make use of many innovative resourc ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  3. Automated Fiber Placement (AFP) Process for Polymer Composite Sabots

    SBC: ADC Acquisition Co. dba Automated Dynamics            Topic: N/A

    Automated Cynamics Corporations (ADC) proposes to exploit its knowledge of automated in-situ consolidation of thermoplastic carbon fiber unidirectional tape to reduce the high scrap rate currently experienced in the in the fabrication of thermoset (epoxy) carbon fiber sabots. The current production process requires several steps which result in material loss (scrap) of approximately 60-70%. App ...

    SBIR Phase II 1998 Department of DefenseArmy
  4. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase II 1998 Department of DefenseNavy
  5. Inflatable Spacecraft Using &quotRigidization On Command&quotTechnology

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  6. SBIR Phase I: Tertiary Recycling Process for Polymer-Based Automotive Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1998 National Science Foundation
  7. Diamond-Like Nanocomposites (DLN) as a Protective, Wear Resistant Thin Film for'Sliding Electrical Contacts.

    SBC: ADVANCED REFRACTORY TECHNOLOGIES, INC.            Topic: N/A

    A novel coating technology is proposed for increased wear and improved li fe and reliability of commutator bars in electrical sliding devices found in manned and unmanned underwater vehlilles. Diamond-Like Nanocomposite (DLN) coatings represent a famil Of thiWrfilms that bxhibit unique combinations of technologically interesting properties including high adhesion to virtually any substrate (inclu ...

    SBIR Phase II 1998 Department of DefenseNavy
  8. Modulation-Doped A1 GaN/Gan Heterostructures and Devices on Semi-Insulating SIC Substrates

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The need for compact solid state ultraviolet light sources includes clinical light sources for a variety of surgeries, analytical instrumentation sources and communications systems based on shorter wavelengths that will be able to handle higher information densities. Such advanced optoelectric applications demand totally new materials. Of those available, silicon carbide is the most promising for ...

    SBIR Phase II 1998 Department of DefenseMissile Defense Agency
  9. Interconnect Technology for High Temperature SiC Integrated Circuits

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Integration of many different devices on a single silicon carbide (SiC) substrate is necessary to realize the full potential of high temperature or high power devices for markets ranging from industrial and consumer to military systems to transportation power and control. Integration requires that the entire device package, individual devices, contacts and interconnect materials, be ...

    SBIR Phase II 1998 Department of DefenseAir Force
  10. High Brightness LEDs based on the (A1, Ga,In)N Materials System

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    116 High Brightness LEDs based on the (Al, Ga,In)N Materials System--Advanced Technology Materials, Inc., 7 Commerce Drive, Danbury, CT 06810-4131; Dr. Karim Boutros, Principal Investigator Dr. Duncan W. Brown, Business Official DOE Grant No. DE-FG02-97ER82319 Amount: $75,000 Based on a combination of physical, electronic and optical properties, the semiconductor materials system (aluminum, g ...

    SBIR Phase II 1998 Department of Energy
US Flag An Official Website of the United States Government