You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Ion-Implanted 2-D MESFET Technology for Wireless Communications

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  2. Nitride, Carbide and Non-Oxide In Situ Coatings Using RECVD,A New CVD Method

    SBC: CCVD, Inc dba MicroCoating Technologies (MCT)            Topic: N/A

    Currently, thermal spray (flame and plasma spray) is the only single step method of applying most metal and non-oxide ceramic coatings to large objects. These coatings are usually of a low quality, and thin films cannot be applied. An in situ deposition technique that inexpensively and easily applies nitrides, carbides and other non-oxide thin or thick films in an environmentally friendly manner i ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  3. Production Friendly GaN Coatings Using RECVD, a New CVD Method

    SBC: CCVD, Inc dba MicroCoating Technologies (MCT)            Topic: N/A

    Currently vacuum based methods of PVD and CVD are the only processes for forming GaN thin films and coatings. These methods are usually expensive and are not applied in a production friendly manner. An atmospheric deposition technique that inexpensively and easily applies GaN thin or thick films in an environmentally friendly manner is a priority for any number of DOD and commercial applications. ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  4. Powder Synthesis and Bulk Crystal Growth of Gallium Nitride

    SBC: CERMET, INC.            Topic: N/A

    The primary goal of Phase I work is to demonstrate the feasibility of synthesizing gallium nitride (GaN) powder. Secondarily, this powder will be used to grow high-purity single crystals of GaN from a liquid GaN phase. This would be accomplished using a proprietary variation of the skull melting technique. Since GaN demonstrates peritectic-type decomposition at atmospheric pressure, the entire sku ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  5. Thermally Insulated Flexible Composite Cores for Aerospace Applications

    SBC: Infinite Materials & Products, Inc.            Topic: N/A

    Aerospace composite panels containing a core structure usually use an expanded honeycomb of either aluminum, NOMEX, or carbon fiber. These types of composite panels are often used as structure since the honey-comb core provides stiffness in the "Z" direction. However, they provide no thermal insulation value. Aerospace craft operating both inside and outside the earth's atmosphere experience envir ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  6. Environmentally Safe, Sprayable, Waterproof, Rapid Three Minute Room Temperature Cure Resin for the Manufacturing of Aerospace Composite Sealants

    SBC: Infinite Materials & Products, Inc.            Topic: N/A

    Currently manufactured aerospace composites absorb water vapor to varying degrees. This moisture absorption adds weight to the composite, however, it lowers the glass transition temperature. And, subsequently, the ultimate strength of the resin holding the composite together, in the total composite matrix. For aerospace vehicles that slip the bonds of Earth and enter the vacume of space, any compo ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. Computer Architecture, Algorithms, Models and Simulations

    SBC: INFORMATION SYSTEMS LABORATORIES, INC.            Topic: N/A

    Reconfigurable computing architectures based on Field Programmable Gate Arrays (FPGAs) offer extaordinary real time processing rates in inexpensive programmable hardware. The key to using FPGAs for reconfigurable computing is to reformulate algorithms in terms of parallel operations that are easily implemented with chains of simple processing elements. Currently available commercial integrated cir ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  8. Solid State Raman Image Amplifier

    SBC: LITE CYCLES, INC.            Topic: N/A

    This Small Business Innovative Research Phase I project will focus on the development of a compact, rugged, low-maintenance, cost-effective, all Solid-State Raman Image Amplifier (SSRIA) capable of amplifying low-level LIDAR images and producing gated images with potential gate times of less than a nanosecond. The innovative technology to be implemented is based on a solid-state stimulated Raman s ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. Sensors-Adaptive Beam Expander

    SBC: LSA            Topic: N/A

    We propose to design and fabricate an adaptive beam expander that can be switched between two magnifications. Specifically, the beam expander provides diffraction-limited performance for laser radar beams with diameters of 1 mm and 3 mm. The adaptive beam expander is lightweight, and it has no moving parts. Because the beam expander is an afocal system, it operates on both outgoing and incoming be ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Fabrication of a Low-Cost, Lightweight Cu-AlN Composite for Thermal Management

    SBC: ATS-MER, LLC            Topic: N/A

    High thermal conductivity materials with low CTE, and high strength and stiffness are required for high thermal flux applications. In addition, if these materials are relatively inexpensive, lightweight and non-toxic, and have low vapor pressure to survive in space-operating environments, they will be attractive candidates for thermal management in aerospace structures. Such materials are urgently ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government