You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Light Source for Cavity Ring-Down Spectrometer

    SBC: Aculight Corporation            Topic: N/A

    Cavity Ring-Down (CRD) spectroscopy is developing into a precise tool for measuring gaseous contaminants in ultrahigh vacuum and other environments. Optimum sensitivity is obtained by driving the CRD spectrometer in the mid-IR part of the spectrum with about 100 mWatts of average power at 5 kHz and with pulse lengths of 10-50 nsec. Bandwidths of 100 MHz are required. There are no commercial lasers ...

    SBIR Phase I 1997 Department of Commerce
  2. Development of an Extremely Low Water-Loss Recirculating Floating Bead

    SBC: AQUACULTURE SYSTEMS TECHNOLOGIES, L.L.C.            Topic: N/A

    A Shortfall in marine fisheries production is driving the development of aquaculture technologies on many fronts. Recirculating systems are regarded as critical components of many development schemes. However, interest and use of recirculating systems for production of marine organisms have lagged behind freshwater applications. A floating bead filter which is corrosion resistant (no metal parts), ...

    SBIR Phase I 1997 Department of Commerce
  3. Process-Based Assurance Product Suite

    SBC: Arca Systems, Inc.            Topic: N/A

    Arca proposes research leading to development of a suite of methodology support products to help meet the need for innovative assurance techniques appropriate for emerging information technologies. The product will consist of a licensable methodology and supporting materials for specifying, building, and evaluating assurance arguments for products and systems based on the capability of security en ...

    SBIR Phase I 1997 Department of Commerce
  4. Algorithms for Health Care Quality Management and Outcomes Assessment

    SBC: BARRON ASSOCIATES, INC.            Topic: N/A

    American health care is in the midst of momentous change. Quality improvement principles are being used increasingly to enhance productivity and efficiency of health care delivery and to help contain costs. In producing patient outcomes and resource utilization measures, it is vital to control appropriately for case mix (i.e., differences in patients due, e.g., to illness severity) in the predicti ...

    SBIR Phase I 1997 Department of Commerce
  5. A Ruggedized System for Measuring Extreme Winds

    SBC: Caregiver Technologies, Inc.            Topic: N/A

    We will develop technology, termed a Ruggedized Wind Measurement System (RWMS), to measure directly extreme winds with high space and time resolution, focusing on the winds that occur beneath hurricanes at land fall. This development effort will include design, fabrication of two prototype RWMS units, and a series of proof-of-concept demonstrations in strong mountain-induced downslope and severe t ...

    SBIR Phase I 1997 Department of Commerce
  6. Development of a 10K TO 77K Magnetic Refrigerator

    SBC: CryoFuel Systems, Inc.            Topic: N/A

    The ability of high speed photography to record useful images of spray plumes generated by metal atomizers, metal spray deposition equipment, and plasma spray coatings depends on a light source capable of providing illumination suitable to record high velocity, specularly reflecting droplets. Due to the reflective nature of the surface of these particles, point sources and collimated light only al ...

    SBIR Phase I 1997 Department of Commerce
  7. Characterization of Consolidation of Non-Spherical Powders

    SBC: MATSYS INCORPORATED            Topic: N/A

    We propose to characterize the early stage of consolidation of non-spherical powders to further the development of process models to enable simulation of powder metallurgy manufacturing for the consumer market, especially the automotive industry. Typically, spherical powders with a narrow size distribution are used for aerospace applications, while low-cost powders with irregular shapes and a wide ...

    SBIR Phase I 1997 Department of Commerce
  8. On-Line Analyzer for Nitrate, Nitrite, Ammonia, pH and Dissolved Oxygen

    SBC: Northwest Instrument Systems,            Topic: N/A

    This project will develop an on-line analyzer instrument for rapid automated sequential analysis of water samples for nitrate nitrogen, nitrite nitrogen, ammonia, pH, and dissolved oxygen. These common chemical constituents and characteristics are essential to the management of aquacultural production facilities. These parameters must be measured frequently and accurately to maintain the health of ...

    SBIR Phase I 1997 Department of Commerce
  9. A Prototype System for Distributed Space-Weather Models and Applications

    SBC: NORTHWEST RESEARCH ASSOCIATES, INC.            Topic: N/A

    Accurate and timely information about space weather has become essential for managing many technologies on which our lives depend (e.g., radio communications, Global Positioning Systems). A major limitation to accessing this information from NOAA and private vendors is the lack of well-defined, standardized methods for accessing data or running models remotely over the Internet. Northwest Research ...

    SBIR Phase I 1997 Department of Commerce
  10. Manufacturing Framework Integration of CMMs Via Emerging Standard for

    SBC: Object Workshops, Inc.            Topic: N/A

    New work is in progress on a CORBA interface standard for online interactive communication with DMIS-based Coordinate Measurement Machines (CMMs). This work is being pursued for submission to CAM-I via a recently organized object technology working committee of the North American DMIS Users Group. We will explore how to build upon this work for integration with existing manufacturing frameworks, e ...

    SBIR Phase I 1997 Department of Commerce
US Flag An Official Website of the United States Government