You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. NANOFIBER NONWOVEN BASED AIRCREW PERSONNEL LOWERING DEVICE

    SBC: 3F LLC            Topic: AF06020

    Nanofiber nonwoven spunbonded materials technology is adapted for use in a personnel lowering device. The resulting device will be simple, easy to use, and relatively low cost.

    SBIR Phase I 2006 Department of DefenseAir Force
  2. Nanoliter Lab-on-a-chip for Protein Crystallization

    SBC: ADVANCED LIQUID LOGIC            Topic: N/A

    DESCRIPTION (provided by applicant): The human genome contains at least 30,000 unique open reading frames that may yield >100,000 polypeptide products. These products assemble into more than a million biologically relevant structures or proteins of interest per organism. Crystallization and X-ray diffraction of these proteins is routinely performed to determine their 3D structure which needs to be ...

    SBIR Phase II 2006 Department of Health and Human ServicesNational Institutes of Health
  3. Nanoliter Lab-on-a-Chip for Blood Diagnostics

    SBC: ADVANCED LIQUID LOGIC            Topic: N/A

    DESCRIPTION (provided by applicant): Latrogenic blood loss or "bleeding into the laboratory" is an important reason for administration of small volume transfusions in very low birth weight premature 6infants. A direct correlation was found between the volume of blood drawn for diagnostics and subsequent volume transfused. In neonatal infants, there may not be enough collected blood sample to perfo ...

    SBIR Phase II 2006 Department of Health and Human ServicesNational Institutes of Health
  4. Portable Programmable Multifunction Body Fluids Analyzer

    SBC: ADVANCED LIQUID LOGIC            Topic: X1103

    Advanced Liquid Logic proposes to develop a very capable analyzer based on its digital microfluidic technology. Such an analyzer would be:  Capable of both simple and complex biological assays  Small, lightweight, power efficient, and easy to operate  Fully programmable and remotely reprogrammable Under NIH funding we have demonstrated clinical chemistry blood diagnostic testing on our ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  5. Nanoliter Lab-on-a-Chip for Rapid Parallel Immunoassays

    SBC: ADVANCED LIQUID LOGIC            Topic: N/A

    DESCRIPTION (provided by applicant): The development of clinically effective cancer vaccines requires reliable analytical methods to evaluate the immune response to vaccination. Immunoassays are among the most sensitive and specific analytical methods that have been used widely in cancer vaccine research, most commonly to monitor the release of cytokines from T-cells in response to vaccination. A ...

    SBIR Phase I 2006 Department of Health and Human ServicesNational Institutes of Health
  6. Single ply 3Dwoven Functionally Gradient Multi-Fiber / Multi-Matrix Composites with Thermal Management Systems

    SBC: 3TEX, Inc.            Topic: AF04249

    In composites, not only can properties vary with load direction, fiber based composites also offer the unique ability to tailor material properties locally. Localized matrix or fiber architecture changes can meet local mechanical, electrical, or thermal loads within a component or vehicle, without weight penalty or resort to additional external structures. In Phase I, the team used 3TEX 3-D wea ...

    SBIR Phase II 2006 Department of DefenseAir Force
  7. Integrally 3D Woven/3D Braided Composite Joining Elements For Ship Construction

    SBC: 3TEX, Inc.            Topic: N04093

    During Phase I, 3TEX designed universal, one-piece, 3D woven fiber preforms which can be used as either a “Butt” (H) joint or as a “P” joint as needed. Composite joints were fabricated and tested, demonstrating the benefit of the integral nature of the 3D preforms. 3D stress/strain and crack propagation analysis of composite Π-joint was performed using 3D MOSAIC code. 3D displacement, st ...

    SBIR Phase II 2006 Department of DefenseNavy
  8. Novel Structural Joining Concepts Using 3-D Textile Preforms and Composites

    SBC: 3TEX, Inc.            Topic: AF05248

    Strength and durability of commonly used bonded and bolted composite-to-composite and composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic moduli, Poisson’s ratios, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature joint failure. The proposed work is focused on develop ...

    SBIR Phase II 2006 Department of DefenseAir Force
  9. 3-D Fiber Reinforced, Thermally Conductive Rotor Sheaths

    SBC: 3TEX, Inc.            Topic: N06T013

    Military helicopters rotors contend with rain, ice, sand, and flying debris. To prevent damage to the expensive blade protective sheaths or coatings are applied to the leading edge of the rotor blades. A 3-D woven composite sheath with high thermal conductivity fibers running through the thickness can offer the best qualities of both metal sheaths and elastomer coatings. Infused with an elastom ...

    STTR Phase I 2006 Department of DefenseNavy
  10. Improved Miller Fasteners Based on 3-D Braided Preforms

    SBC: 3TEX, Inc.            Topic: N06033

    Miller Fasteners made from 2-D laminates represent the state of the art in joining CMC panels to metal frames. Despite its success, the extant Miller fastener design is limited by its construction from a laminate of 2-D fabric. The resultant fastener part has poor interlaminar shear strength, and its manufacture and application entails high machining costs and high material scrap rates. 3TEX, i ...

    SBIR Phase I 2006 Department of DefenseNavy
US Flag An Official Website of the United States Government