You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of an Anthropometrically Modifiable Munitions Operator (AMMO) System

    SBC: MAINSTREAM ENGINEERING CORP            Topic: HSB0121004

    The proposed research plan will start at a TRL 1 and commence with the collection of dynamic recoil response field data using a firearm and ammunition chosen by the DHS for testing. Data will be collected for a firearm operator that classifies as a 90th percentile male, and an operator that classifies as a 50th percentile or smaller female based on height and weight. The data will then be fit to a ...

    SBIR Phase I 2012 Department of Homeland Security
  2. Standoff Explosive Raman AIT Upgrade Module

    SBC: Alakai Defense Systems, Inc.            Topic: HSB0112004

    Alakai proposes to develop a Standoff Explosive Raman AIT Upgrade Module (SERAUM) which utilizes, Eye-safe, deep UV Raman scanning/imager to detect explosives and their precursors, for short standoff trace explosive detection. This system is designed for integration into DHS's Advanced Imaging Technology (AIT) systems to provide a chemical signature of explosives thereby improving the screening ef ...

    SBIR Phase II 2012 Department of Homeland Security
  3. Forensic Acqusition of Solid State Storage Devices

    SBC: CPR Tools Inc.            Topic: HSB0122001

    Solid state drives (SSD) suffer from data modification issues caused by internal influences such as those caused by manufacturer implemented functionality designed to increase product life and maintain performance. The purpose of the proposed innovation is to address these issues to provide the capability of acquiring a full forensic data copy while maintaining the forensic integrity of the subje ...

    SBIR Phase I 2012 Department of Homeland Security
  4. Real Time Signal State Transition Software for ATC- NTCIP Interface

    SBC: Advanced Technologies, Inc            Topic: 06FH1

    Phase II Project Scope: ATI has developed an open source Signal Control Programming Environment (SCOPE) that ➢ Implements Actuated Control with Min Recall Mode, Max Recall Mode, Gap Out Mode, Max Out Mode, Presence Mode, Lane-by-Lane Control. ➢ Contains a Pretimed Mode allowing control of 3-leg, 4-leg, and Texas Diamond Intersections ➢ Can be easily ported to any operating system. ➢ Can ha ...

    SBIR Phase II 2012 Department of Transportation
  5. Next Generation Neutron Detectors for Backpack and Handheld Applications

    SBC: Innovative American Technology Inc.            Topic: 111001

    Innovative American Technology Inc. (IAT) has developed a prototype backpack, a handheld neutron detector and a directional neutron detector based on our 6LiFZnS(Ag) neutron detector design. IAT has also developed prototype designs for a miniaturized sensor electronics module (MSEM) that integrate signal processing and power into an individual neutron detector module and the application of a solid ...

    SBIR Phase II 2012 Department of Homeland Security
  6. Improved Microcalorimeter Detectors for X-Ray Chemical Shift Mapping

    SBC: STAR CRYOELECTRONICS, LLC            Topic: N/A

    X-ray fluorescence spectroscopy is a widely used and extremely sensitive analytical technique for qualitative as well as quantitative chemical analysis. Superconducting Transition Edge Sensor (TES) microcalorimeter detectors have now been developed that achieve an energy resolution of 2 eV (full width at half maximum) for 1.5 keV X-rays, which is sufficient to enable the measurement of the small s ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
  7. New Flexible FR Polyurethane Foams for Energy Absorption Applications

    SBC: Gordon Nelson and Associates            Topic: T703

    Development of new polyurethane (PU) insulation foams through a non-toxic environmentally friendly composite approach. Target FR foams will exhibit high heat flow resistance as well as lower density than conventional PU. Foams involve synergism between novel phosphonate FRs and smoke suppression agents coupled with use of aerogel. Preliminary data show peak heat release rates reduced by 50% ver ...

    STTR Phase I 2012 National Aeronautics and Space Administration
  8. Colosed-Loop Control of the Thermal Stir Welding Process to Enable Rapid Process/Ppart Qualification

    SBC: Keystone Synergistic Enterprises, LLC            Topic: T901

    Thermal Stir Welding (TSW) provides advancement over the more conventional Friction Stir Welding (C-FSW) process because it separates the primary processes variables thereby allowing independent control of metal stirring and forging from the stir zone temperature. However, the feedback for precise control of the stir zone temperature, and hence the process parameters to sustain that temperature w ...

    STTR Phase I 2012 National Aeronautics and Space Administration
  9. Wireless SAW Sensor Strain Gauge&Integrated Interrogator Design

    SBC: Mnemonics, Inc.            Topic: T701

    The proposed Wireless, passive, SAW sensor system operates in a multi-sensor environment with a range in excess of 45 feet. This proposed system offers unique features in two (2) important areas. The first is in the development of a new sensor type, a strain gauge that is based on OFC techniques and implemented with the low loss characteristics of SAW Unidirectional transducers. The second is in t ...

    STTR Phase II 2012 National Aeronautics and Space Administration
  10. Self-stabilized monolithic solid state single frequency laser

    SBC: OPTIGRATE CORPORATION            Topic: SB12A001

    The general objective of this proposal is to design a self-stabilized monolithic single frequency solid state laser. The main advantage of the approach is based on the integration of a laser cavity within active laser material - Nd-doped photo-thermo-refractive (PTR) glass, which allows constructing narrow line unidirectional, environmental insensitive laser. This glass possesses both properties o ...

    STTR Phase I 2012 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government