You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Advanced Conformal Piezoceramic Actuators

    SBC: Active Control eXperts, Inc.            Topic: N/A

    ACX proposes to develop durable and reliable conformal geometry actuator packages. These packages will have the ability to operate as linear actuators for motion control applications as well as to conform to structures with curved surfaces for applications requiring induced strain actuation. These packages provide a protective skin offering electrical isolation, and provide a means for integration ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  2. Ion-Implanted 2-D MESFET Technology for Wireless Communications

    SBC: Advanced Device Technologies,            Topic: N/A

    This Phase I project has two primary objectives. The first objective is to evaluate the feasibility of a fully ion implanted fabrication process based on the heterodimensional 2-D MESFET. The new device, the 2-D JFET, will have p+ ion implanted sidegates which laterally modulate a thin, highly doped n-type conducting channel. The 2-D JFET should have excellent high speed, low power characteristics ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  3. Low Cost Avalanche Photodiodes and Photodiode Arrays

    SBC: Radiation Monitoring Devices, Inc.            Topic: N/A

    Silicon avalanche photodiodes are among the most sensitive optical detectors available today. It 11as been shown that large area APDs are potentially an excellent alternative to photomultiplier tubes (PMTs) in applications such as LIDAR, nuclear medicine, physics research and nuclear radiation measurement instrumentation. They can offer improved performance based on their compact size, solid state ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  4. Enhanced Pulse Power Using Cryogenic Electronics

    SBC: AMERICAN SUPERCONDUCTOR CORPORATION            Topic: N/A

    Phase I will reduce the weight, size, and cost of pulsed power electronic equipment by achieving compact integration of the solid-state semiconductors. A dramatic reduction in waste heat and thermal management problems will be effected, thus eliminating conventional heat sinks, blower fans, etc. Phase I will also offer special advantages in space-based equipment where size and weight are at a prem ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  5. Actively Cooled Minority-Carrier Devices for Power Conditioning

    SBC: AMERICAN SUPERCONDUCTOR CORPORATION            Topic: N/A

    New power semiconductor device performance is limited by cooling because high heat-flux cooling systems have not matched their increased power density. Therefore, real designs rarely achieve device ratings. American Superconductor (ASC) demonstrated CryoPower+, which cools a variety of power MOSFET topologies by direct immersion in coolants from 77-300K, with boiling where appropriate. CryoPower ( ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  6. Treatment to Increase the Strength of Sapphire Windows and Domes

    SBC: Aspen Systems, Inc.            Topic: N/A

    Aspen Systems proposes to develop a novel process to increase the strength of sapphire at elevated temperatures. The resulting increase will alleviate strength losses in high performance IR seeker systems such as THAAD and Standard Block IV. The Aspen process will uniformly implant silicon atoms within the sapphire window material. This will in turn pin the crystal lattice resulting in a structure ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. Optical Networks and Interconnects

    SBC: Boston Communications            Topic: N/A

    In this project we address the design and development of a Computer Aided design Tool for Optical networks (CATO). Its major objective is to support the design, evaluation, testing and operation of optical networks and optical interconnect architectures. The proposed tool will be based on a unique "fuzzy" specification approach, whereby the user will enter only general requirements/constraints an ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  8. Optical Power Limiters

    SBC: BRIMROSE CORPORATION OF AMERICA            Topic: N/A

    Brimrose proposes to produce an improved material for optical power l miting at near infrared wavelengths to protect sensors against jamming and to build a prototype device. The proposed material, vanadium doped cadmium telluride, is relatively new and will be used to fabricate an electro-optic power limiter (EOPL). This approach of using a doped II-VI semiconductor for power limiting was first de ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  9. Novel Photorefractive Time-Integrating Detector for the Radar Signal Processing

    SBC: BRIMROSE CORPORATION OF AMERICA            Topic: N/A

    Using newly developed II-VI photorefractive semiconductors as time integrator and high performance TeO2 acousto optic deflectors (AODs), Brimrose proposes to develop a compact RF signal processor useful in radar signal processing. The high sensitivity of this relatively new photorefractives, in the wavelength range of 0.63ym to 1.6,um, will allow signal processing using low power near infrared las ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Carbon nanotube Field Emission Cathode for Electric Space Propulsion

    SBC: Busek Co., Inc.            Topic: N/A

    Low power electrostatic thrusters are greatly penalized by the lack of small efficient cathodes. Conventional hollow cathodes are relatively large and consume power and propellant at a rate approaching that required by the small thruster, thus greatly reducing its overall efficiency and Isp. An attractive alternative to hollow cathodes are fieId emission array (FEA) cathodes. These do not require ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government