You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Micro-Positioner Replacement of Piezo Actuators in Long-working Distance Interference Microscopes

    SBC: E. M. Optomechanical, Inc.            Topic: N/A

    The NIST patented six-degree of freedom micropositioner technology associated with this subtopic has been identified by E M Optomechanical, Inc. (EMOM) as a technology that could be incorporated into the company¿s long-working distance interference microscopes. A key element in these microscopes is a piezo-actuator device, installed in a manual pitch/yaw mount, which translates a small flat mirro ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  2. High Power, Mid-Infrared Fiber Supercontinuum Light Source

    SBC: MESA PHOTONICS LLC            Topic: N/A

    Modern supercontinuum (SC) light sources are generated by non-linear interactions between ultrashort laser pulses and optical fibers. These light sources have high brightness and are spatially coherent. Output in near-ultraviolet to near-infrared wavelength ranges has been demonstrated. SC wavelength ranges are constrained by the transmission and dispersion properties of the fibers. Previously, ou ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  3. Inexpensive, disposable radiation detectors

    SBC: NANOPTICS, INC.            Topic: DTRA082007

    This proposal concerns the detection of Special Nuclear Materials (SNM) by using large networks of small, inexpensive, and robust gamma detectors. These detectors will be deployed where consistent surveillance would be difficult by any other means, like remote mountain trails. The proposal describes a novel gamma detector that is extremely robust and inexpensive. The new scintillation material is ...

    SBIR Phase I 2009 Department of DefenseDefense Threat Reduction Agency
  4. Innovative Residential Fire Detection

    SBC: SOUTHWEST SCIENCES INC            Topic: N/A

    Southwest Sciences¿ Phase 2 SBIR project will lead to development of residential fire sensing systems based on recently developed, low cost temperature and optical imaging sensors combined with newly introduced highly miniaturized, micropower CO sensors. Sensor modules will be part of a low power wireless network. Each module will be about ½ the size of a business card, a few mm thick, and w ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  5. Microcalorimeter Alpha Spectrometer for Analysis of Nuclear Material

    SBC: STAR CRYOELECTRONICS, LLC            Topic: N/A

    A key factor of international efforts to identify and suppress the supply of and demand for nuclear materials, and thereby to deter potential traffickers, is the ability to accurately identify contradicted material and ultimately to trace it back to its origin. Alpha particle spectroscopy is widely used in nuclear forensics to assay trace quantities of sensitive nuclear materials, but the limited ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  6. Reflex Triode

    SBC: KTECH CORP.            Topic: N/A

    "Reflex triode bremsstrahlung sources potentially provide warm X-ray sources (20 keV to 500 keV), capable of generating high doses (~10 cal/g gold) over exposure areas of ~20 cm2. This needed capability allows experimental verification of warm X-ray inducedthermomechanical response, SGEMP, and box IEMP models for achieving component and system certification to hostile environments.In a reflex trio ...

    SBIR Phase I 2002 Department of DefenseDefense Threat Reduction Agency
  7. Reflex Triode

    SBC: KTECH CORP.            Topic: N/A

    "Reflex triode bremsstrahlung sources potentially provide warm X-ray sources (20 keV to 500 keV), capable of generating high doses (~10 cal/g gold) over exposure areas of ~20 cm2. This needed capability allows experimental verification of warm X-ray inducedthermomechanical response, SGEMP, and box IEMP models for achieving component and system certification to hostile environments.In a reflex trio ...

    SBIR Phase II 2002 Department of DefenseDefense Threat Reduction Agency
  8. Diaphragm Pressure Gauge

    SBC: KTECH CORP.            Topic: N/A

    "Nuclear Weapons Effects Tests (NWET) frequently require that the test article be irradiated in an ultra-clean environment, making survivable shields a necessary part of many debris systems. Survivable shields as large as 12 inches in diameter are requiredbut have yet to be demonstrated in Plasma Radiating Source (PRS) environments. The loads on a survivable shield are a combination of radiation i ...

    SBIR Phase I 2002 Department of DefenseDefense Threat Reduction Agency
  9. Adiabatic Thermopile for Radiation Dosimetry

    SBC: KTECH CORP.            Topic: N/A

    "Measurements of fluence from a Plasma Radiation Source (PRS) are critical to the performance of accurate Nuclear Weapon Effects (NWE) experiments. Fast, total stopping calorimeters have been demonstrated to provide a robust, reusable, economic sensor forfluence measurements. However, the output of these sensors is a few millivolts and thus high signal to noise recording is difficult to achieve, ...

    SBIR Phase I 2002 Department of DefenseDefense Threat Reduction Agency
  10. Antimonide Laser Spectrometer for measuring the flux of ammonia

    SBC: SOUTHWEST SCIENCES INC            Topic: N/A

    This Phase I SBIR research project will investigate the feasibility of an ammonia sensor based on an antimonide laser and an advanced, low noise modulation spectroscopy method. The rapid response and high sensitivity will allow the use of the eddy correlation method to provide continuous measurement of ammonia flux. Minor adjustments to the laser operating point will allow the instrument to measur ...

    SBIR Phase I 2002 Department of Commerce
US Flag An Official Website of the United States Government