You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Antistatic Thermal Control Coatings

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Electrostatic discharge control is vital for the health of any spacecraft. Exposure to charged particles in a space enviroment can lead to large charge differences across the craft, that, if no mechanism for controlled discharge is present, can destroy mission critical equipment. The preferred way of ESD control is to use conducting thermal control coatings. These coatings combine the ability to r ...

    SBIR Phase II 2002 National Aeronautics and Space Administration
  2. Self-Deploying Foam Antenna Structures

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Inflatable or self-deployable systems offer the only practical way to achieve space deployed antennas with low mass at large aperture. In this Phase I program, open-celled rigid polyurethane foams were developed for use in self-deploying antenna structures. Advantages of such a system relative to current systems include high volumetric efficiency of packing, inherent restoring force, low (or no) o ...

    STTR Phase II 2002 National Aeronautics and Space Administration
  3. Low Cost Engine Test Stand for 500 lb Thrust Class Engines

    SBC: AJT and Associates, Inc            Topic: N/A

    AJT proposes to develop a low-cost, engine test-stand system for small (500 pound) thrust engines using gaseous, liquid or cryogenic propellants. This test stand would incorporate automated propellant transfer and automated propellant line purge systems. The engines would be configured to a standard test-stand interface, greatly reducing the time required to install and remove various engines. Thi ...

    SBIR Phase II 2002 National Aeronautics and Space Administration
  4. Magnetohydrodynamic Stable Reference (MSTAR)

    SBC: A-TECH CORPORATION            Topic: N/A

    Platforms for scientific instruments increasingly require attitude knowledge and optical instrument pointing at sub-arcsecond accuracy. No low-cost commercial system exists to provide this level of accuracy for guidance, navigation, and control (GNC) and precision instrument pointing. ATA proposes to introduce a small inexpensive inertial attitude reference system based upon magnetohydrodynamic (M ...

    SBIR Phase II 2002 National Aeronautics and Space Administration
  5. Nano Ceramic Sterilization Filter

    SBC: ARGONIDE CORP.            Topic: N/A

    Filters don't exist that are capable of removing virus and bacteria at high enough flow rates to be practical either for space systems or for domestic consumption. In Phase 1 we demonstrated feasibility that our nano ceramic fiber filter could produce sterile water at high flow rates. In Phase 2 we propose to develop performance data on such filters that would provide NASA with the capability for ...

    SBIR Phase II 2002 National Aeronautics and Space Administration
  6. Upper and Lower Bounds in Finite Element Analysis of Aerospace Structures

    SBC: Astra Technologies, Inc            Topic: N/A

    The proposed research is intended to develop a new analysis for stresses and displacements in aerospace structures based on the combined conventional Displacement (Stiffness) Method and on a new formulation of the Force Method developed by the principal investigator. Since some of the elements used currently in the Displacement Method violate equations of stress equilibrium, an additional analysis ...

    SBIR Phase II 2002 National Aeronautics and Space Administration
  7. Electrochromic Thermal Stabilization of Large Deployable Structures

    SBC: ECLIPSE ENERGY SYSTEMS, INC.            Topic: N/A

    Solar sails use a thin reflecting membrane to deflect sunlight, converting the momentum of solar photons striking the sail to a means of spacecraft propulsion. The trajectory of the sail-powered spacecraft may be controlled by through a mechanical arrangement or through the use of an electrochromic material that changes reflectivity or transmittance in response to the application of an electric po ...

    SBIR Phase II 2002 National Aeronautics and Space Administration
  8. Electrochromic Variable Emissivity Devices for Thermal Control

    SBC: ECLIPSE ENERGY SYSTEMS, INC.            Topic: N/A

    Small light-weight satellites and space vehicles under development for future NASA missions have reduced thermal mass and are rapidly affected by changes in orbital conditions, resulting in large temperature variations. Restrictions on payload weight and volume limit the usefulness of many thermal control system technologies. To address this problem, Eclipse Energy Systems, Inc. (EES) has suggeste ...

    SBIR Phase II 2002 National Aeronautics and Space Administration
  9. Development of Synthetic Muscle Systems for NASA Space Robotics/EVA Applications

    SBC: ENVIRONMENTAL ROBOTS, INC.            Topic: N/A

    The goal of the proposed Phase I research is to explore the feasibility of developing a family of novel synthetic muscle systems with robotic sensing and actuation capabilities, for a wide spectrum of NASA space robotic and EVA applications. In particular, configurations of interest may be in the form of multi-fingered biomimetic robotic hands to handle delicate and small space objects such as sma ...

    SBIR Phase II 2002 National Aeronautics and Space Administration
  10. Ordered Ultrathin Films based on Conducting Polymers for Gas Sensors

    SBC: Fractal Systems, Inc.            Topic: N/A

    Gas sensors based on metal oxides are known to be widely used for the detection of gases, aromatic hydrocarbon, etc., but such sensors lack selectivity, and operation at high temperatures is required. We have proved feasibility of our approach in Phase I, which focused on the use of highly organized ultrathin films of conducting polymers synthesized/processed via the layer-by-layer self-assembly t ...

    SBIR Phase II 2002 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government