Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced Milli-Meter Wave Sensor for Multi-Function Intelligence


    "The purpose of this effort is to develop an unattended man-portable or light-mobileRF sensor system to provide ground forces with the capability to detect,intercept, identify, precision locate, and develop targets of both threat voice anddigital communications and non-communications in the millimeter wave frequency radiospectrum. The system will be designed with a wideband scanning capability in ...

    SBIR Phase I 2002 Department of DefenseArmy
  2. Inert metal encapsulation of magnetic particles for improved magnetic field effects at fuel cell electrodes

    SBC: ELECTROPHORICS, INC.            Topic: N/A

    "Magnetic field-enhanced electrocatalysis at the hydrogen and air electrodes of PEM fuel cells have reported improved power densities, three-fold over conventional PEMFCs. Leddy, et al. used micron-sized polymer-encapsulated beads of permanent magnetsplaced in conventional inks of carbon-supported platinum electrocatalysts to enhance MEA performance. Their work showed a qualitatively improved CO ...

    STTR Phase I 2002 Department of DefenseArmy
  3. Reflex Triode

    SBC: KTECH CORP.            Topic: N/A

    "Reflex triode bremsstrahlung sources potentially provide warm X-ray sources (20 keV to 500 keV), capable of generating high doses (~10 cal/g gold) over exposure areas of ~20 cm2. This needed capability allows experimental verification of warm X-ray inducedthermomechanical response, SGEMP, and box IEMP models for achieving component and system certification to hostile environments.In a reflex trio ...

    SBIR Phase I 2002 Department of DefenseDefense Threat Reduction Agency
  4. Diaphragm Pressure Gauge

    SBC: KTECH CORP.            Topic: N/A

    "Nuclear Weapons Effects Tests (NWET) frequently require that the test article be irradiated in an ultra-clean environment, making survivable shields a necessary part of many debris systems. Survivable shields as large as 12 inches in diameter are requiredbut have yet to be demonstrated in Plasma Radiating Source (PRS) environments. The loads on a survivable shield are a combination of radiation i ...

    SBIR Phase I 2002 Department of DefenseDefense Threat Reduction Agency
  5. Adiabatic Thermopile for Radiation Dosimetry

    SBC: KTECH CORP.            Topic: N/A

    "Measurements of fluence from a Plasma Radiation Source (PRS) are critical to the performance of accurate Nuclear Weapon Effects (NWE) experiments. Fast, total stopping calorimeters have been demonstrated to provide a robust, reusable, economic sensor forfluence measurements. However, the output of these sensors is a few millivolts and thus high signal to noise recording is difficult to achieve, ...

    SBIR Phase I 2002 Department of DefenseDefense Threat Reduction Agency
  6. Benchmark Part for Form, Fit and Functional Testing for the Laser Engineered Net Shaping (LENS) Process

    SBC: OPTOMEC, INC.            Topic: N/A

    During this Phase I effort Optomec will demonstrate that the Laser Engineered Net Shaping (LENS) process provides a viable means for both repair and fabrication of functional prototype components for the MPH needs. This work will serve to establish abenchmark part that can be used for calibration and set up of the LENS equipment, as well as other commercially available RP equipment. The goal of ...

    SBIR Phase I 2002 Department of DefenseArmy
  7. Ruggedized Medic

    SBC: PARAVANT, INC.            Topic: N/A

    "The Army medical community needs a small ruggedized computer for use in combat casualty care and field health support operations. This device must meet the functional needs and requirements of the field medical first responder and be of a rugged naturesufficiently robust to withstand and operate in the severe environmental conditions operationaly encountered. In response to this requirement, Par ...

    SBIR Phase I 2002 Department of DefenseArmy
  8. Dedicated Computational Microsystems for Biomedical Sensors


    "Human activity monitoring with a wrist worn instrument, the actigraph, hassuccessfully been used to quantify bulk human activity, and predict macro-quantitiessuch as hr:min of sleep. These devices do not yield information about the underlyingmovement physiology because the simple detection methods ignore important signalcharacteristics. Recently it was demonstrated heart and lung ballistic activ ...

    SBIR Phase I 2002 Department of DefenseArmy
  9. Synthetic Natural Environment (SNE) Development & Interoperability

    SBC: SIMWRIGHT, INC.            Topic: N/A

    "Despite recent advances in hardware and software tools for modeling and simulation, significant limitations still exist in the ability to quickly create and render geospecific visual terrain databases (TDB's). Existing capabilities to generate terraindatabases are often tied to classified databases that cannot be used for many general-purpose applications. Worldwide coverage can only be provided ...

    SBIR Phase I 2002 Department of DefenseArmy
  10. Hybrid Ceramic Composites for Advanced Turbomachinery

    SBC: Thor Technologies, Inc.            Topic: N/A

    "Continuous fiber-reinforced ceramic composites (CFCCs) are inherently wear and oxidation resistant, retain strength at higher temperatures and have lower specific densities than competing metal systems. The hot sections of gas turbine engines and relateddevices are exposed to aggressive gaseous species at high temperature. Because of their thermochemical stability and oxidation resistance, CFCC ...

    SBIR Phase I 2002 Department of DefenseArmy
US Flag An Official Website of the United States Government