Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Component Level, Multimedia communication technology for survivability

    SBC: Adept Systems, Inc.            Topic: N/A

    "A detailed feasibility study of the most viable options for RF dual mode communications for enhanced survivability will be conducted. Three major configurations will be investigated and compared. Adept has developed a network analysis tool for survivabletopologies that will be used to perform a survivability-cost-performance tradeoff between the different configurations. The feasibility of the be ...

    SBIR Phase I 2002 Department of DefenseNavy
  2. Innovative Gas Turbine Engine Propulsion

    SBC: AGILIS MEASUREMENT SYSTEMS, INC.            Topic: N/A

    "The proposed program is focused on studying UAV critical technologies. Two technologies considered significant to meet the emerging UAV requirements include power extraction and the engine centrifugal compressor material. Therefore, two studies will beconducted in the proposed program:¿ A detailed study will be conducted to evaluate secondary power extraction propulsion system optimizatio ...

    SBIR Phase I 2002 Department of DefenseNavy
  3. Automated Shipboard Provisions and Material Transfer System

    SBC: BENEDICT ENGINEERING CO., INC.            Topic: N/A

    "Automated storage and retrieval systems have proven effective methods of increasing efficiency and lowering overhead costs in many land-based industries. Implementing such systems in Navy Destroyer class ships is the objective of the next generation DDX.Automated or semi-automated storage and retrieval systems (AS/RS) improve the efficiency of and reduce manpower required for storing, retrieving ...

    SBIR Phase I 2002 Department of DefenseNavy
  4. Design of Sharable Content Objects with Return on

    SBC: DISTRIBUTED SIMULATION TECHNOLOGY, INC.            Topic: N/A

    "The production of educational content is traditionally labor intensive and requires significant software development skills, time and resources. Traditionally, trainers using Computer Based Training (CBT) do not have the software background or expertiseto rapidly create stimulating content for their students. DiSTI believes that by leveraging previously developed EGO (Encapsulated Graphical Obj ...

    SBIR Phase I 2002 Department of DefenseNavy
  5. New Cooling Technology to Increase Aircraft Generators Power Rating

    SBC: ELECTRODYNAMICS ASSOCIATES, INC.            Topic: N/A

    "A number of Navy aircraft including P-3, E-2C, and C-130 have electric power systems that use Honeywell generator type 28B95. This generator was rated at 60-kVA per military standard Mil-G-21480A and is capable of providing up to 90-kVA output duringflight. Due to the growth in Avionics, it is desirable to increase the power by 30 to 50%. This must be accomplished within the existing constraints ...

    SBIR Phase I 2002 Department of DefenseNavy
  6. Simulation Based Automatic Design for Producability

    SBC: INDUSTRIAL PLANNING TECHNOLOGY, INC.            Topic: N/A

    "Design for producability is the key to reducing ship construction costs. The most direct way to ensure that design for producability goals are met is to automate portions of the design process, enforcing producability requirements in software. IndustrialPlanning Technology Inc has developed an automated design and planning technology that is based on the use of high fidelity fabrication and ass ...

    SBIR Phase I 2002 Department of DefenseNavy
  7. Reflex Triode

    SBC: KTECH CORP.            Topic: N/A

    "Reflex triode bremsstrahlung sources potentially provide warm X-ray sources (20 keV to 500 keV), capable of generating high doses (~10 cal/g gold) over exposure areas of ~20 cm2. This needed capability allows experimental verification of warm X-ray inducedthermomechanical response, SGEMP, and box IEMP models for achieving component and system certification to hostile environments.In a reflex trio ...

    SBIR Phase I 2002 Department of DefenseDefense Threat Reduction Agency
  8. Diaphragm Pressure Gauge

    SBC: KTECH CORP.            Topic: N/A

    "Nuclear Weapons Effects Tests (NWET) frequently require that the test article be irradiated in an ultra-clean environment, making survivable shields a necessary part of many debris systems. Survivable shields as large as 12 inches in diameter are requiredbut have yet to be demonstrated in Plasma Radiating Source (PRS) environments. The loads on a survivable shield are a combination of radiation i ...

    SBIR Phase I 2002 Department of DefenseDefense Threat Reduction Agency
  9. Adiabatic Thermopile for Radiation Dosimetry

    SBC: KTECH CORP.            Topic: N/A

    "Measurements of fluence from a Plasma Radiation Source (PRS) are critical to the performance of accurate Nuclear Weapon Effects (NWE) experiments. Fast, total stopping calorimeters have been demonstrated to provide a robust, reusable, economic sensor forfluence measurements. However, the output of these sensors is a few millivolts and thus high signal to noise recording is difficult to achieve, ...

    SBIR Phase I 2002 Department of DefenseDefense Threat Reduction Agency
  10. Mult-mode Fiber-Optic Switch

    SBC: NUONICS, INC.            Topic: N/A

    "This Small Business Innovation Research Phase I project deals with multimode fiber-optic switching based on microelectromechanical systems (MEMS) devices and low loss efficient optics for military applications. The two approaches meet the ruggedfail-safe optical interconnect requirements for implementing a multi-mode NxN fiber optical switch that allows aircraft redundancy management and comput ...

    SBIR Phase I 2002 Department of DefenseNavy
US Flag An Official Website of the United States Government