Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced Milli-Meter Wave Sensor for Multi-Function Intelligence

    SBC: CUSTOM MANUFACTURING & ENGINEERING, INC.            Topic: N/A

    "The purpose of this effort is to develop an unattended man-portable or light-mobileRF sensor system to provide ground forces with the capability to detect,intercept, identify, precision locate, and develop targets of both threat voice anddigital communications and non-communications in the millimeter wave frequency radiospectrum. The system will be designed with a wideband scanning capability in ...

    SBIR Phase I 2002 Department of DefenseArmy
  2. Ruggedized Medic

    SBC: PARAVANT, INC.            Topic: N/A

    "The Army medical community needs a small ruggedized computer for use in combat casualty care and field health support operations. This device must meet the functional needs and requirements of the field medical first responder and be of a rugged naturesufficiently robust to withstand and operate in the severe environmental conditions operationaly encountered. In response to this requirement, Par ...

    SBIR Phase I 2002 Department of DefenseArmy
  3. Dedicated Computational Microsystems for Biomedical Sensors

    SBC: PRECISION CONTROL DESIGN, INC.            Topic: N/A

    "Human activity monitoring with a wrist worn instrument, the actigraph, hassuccessfully been used to quantify bulk human activity, and predict macro-quantitiessuch as hr:min of sleep. These devices do not yield information about the underlyingmovement physiology because the simple detection methods ignore important signalcharacteristics. Recently it was demonstrated heart and lung ballistic activ ...

    SBIR Phase I 2002 Department of DefenseArmy
  4. Synthetic Natural Environment (SNE) Development & Interoperability

    SBC: SIMWRIGHT, INC.            Topic: N/A

    "Despite recent advances in hardware and software tools for modeling and simulation, significant limitations still exist in the ability to quickly create and render geospecific visual terrain databases (TDB's). Existing capabilities to generate terraindatabases are often tied to classified databases that cannot be used for many general-purpose applications. Worldwide coverage can only be provided ...

    SBIR Phase I 2002 Department of DefenseArmy
  5. Suppression of Thermal Emission from Exhaust Components Using an Integrated Approach

    SBC: TEMEKU TECHNOLOGIES, INC.            Topic: N/A

    The objective of this program is to develop an integrated approach to obtaining cooler exhaust temperatures, which has minimal impact on vehicle weight, power, and internal space. There were four technical objectives in Phase I:1.Identify the virtualdesign models and computer prediction software that will be used in the computer design phase of the integrated development program; 2.Identify the h ...

    SBIR Phase II 2002 Department of DefenseArmy
  6. Route-planning on the spheroid gridded by a DTEM

    SBC: Envirospace Software Research, Inc.            Topic: N/A

    "Route-planning for vehicles and motion-planning for robots is most effective, and most challeging technically, when it is performed in realtime by on-board computer-processors. The realtime planning allows for responses to changes in the surroundings asthe vehicle or robot proceeds towards a goal from a start. En route planning is accomplished by the repeated execution of sophisticated search p ...

    SBIR Phase I 2002 Department of DefenseArmy
  7. Increased Performance of GCSEL Arrays by Improved Thermal Management

    SBC: RINI TECHNOLOGIES INC            Topic: N/A

    This Phase I SBIR effort will demonstrate the feasibility of using RTI's patent pending cooling technology, Evaporative Spray Cooling (ESC), to enable a revolutionary GCSEL diode laser technology to be scaled to high power. The GCSEL array has the abilityto cut any material in a rapid and precise fashion with low beam divergence diodes; and by adding the advanced heat removal capacity of ESC the G ...

    SBIR Phase I 2002 Department of DefenseArmy
  8. Optical Full-Field Pressure Measurement System

    SBC: AeroChem Corporation            Topic: N/A

    AeroChem Corp. proposes to develop an optical system for full-field pressure measurements. Our system will be a significant improvement over existing Pressure Sensitive Paint (PSP) systems. It will be capable of unsteady pressure measurements for both periodic and short duration transient conditions. Aerochem's system will also be self-compensating for temperature variations, will simultaneousl ...

    SBIR Phase I 1997 Department of DefenseArmy
  9. Evolutionary Design of Imaging AGC for ATR and Tracking

    SBC: AET, Inc.            Topic: N/A

    The US Army has identified a need to provide advanced AGC (automatic gain control) algorithms for ATR tasking involving a man-in-the-loop. To be practical, such provision must be achieved in such a way as to allow the continued on-demand production of high-performance RGC algorithms via a cost effective design approach. This proposal by AFT, Inc. addresses these concerns by providing a means to ...

    SBIR Phase I 1997 Department of DefenseArmy
  10. Radiation Effects Modeling for High Yield, Reliable Integrated Circuits

    SBC: AET, Inc.            Topic: N/A

    The Defense Special Weapons Agency (DSWA) has identified a need to improve the radiation hardness of advanced integrated circuit technologies. To be practical, this must be achieved in a cost effective way. This proposal by AET, Inc. directly addresses these concerns. Specifi-cally, this proposal provides a means to achieve significant advance in radiation hardness of large scale integrated cir ...

    SBIR Phase I 1997 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government