You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Aerospace Ceramics and Bone

    SBC: BIOMEDICAL ENTERPRISES INC            Topic: N/A

    BioMedical Enterprises, Inc. (BME) and NASA Ames Research Center (NASA ARC) are developing NASA's aerospace insulation materials for use as an osseous scaffolding to facilitate and support bone wound healing and regeneration. Fibrous reusable composite insulation (FRCI) developed by NASA for use on the space shuttle was modified to promote bone ingrowth and will be evaluated for its ability to fo ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  2. A Low-Cost Miniature Active Radar Frequency Package (AFRP)

    SBC: Carrell Associates, Inc.            Topic: N/A

    This SBIR Phase I program will test the feasibility of achieving a high effective radar cross section over extremely wide bandwidth in a small, low-cost, RF repeater module, using a retrodirective array of a very small repeaters. The array factors effectively multiply the RF characteristics of a single channel to realize high array gain and power using low-performance amplifier. An integral goal ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  3. Affordable Lightweight Electronic Packaging Materials

    SBC: Cast Metal Composites            Topic: N/A

    The objective of the proposed program is to develop and demonstrate a low-cost, high thermal conductivity, low mass density material for use in electronic packaging. Target material characteristics are: less than aluminum heat sinks, thermal conductivity at least 200 W/m-k, and mass density less than aluminum. To address this objective, Cast Metal Composites, Inc. will produce lightweight, high ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  4. Solid State Growth of Advanced Ceramic Single Crystals

    SBC: CERONE, INC.            Topic: N/A

    The proposed experimental program demonstrates the technical feasibility of growing single crystals of technologically important ceramics by the solid state method. The proposed method relies on discontinuous grain growth which is often regarded as undesirable and deleterious during the sintering of many ceramics. In order to demonstrate the technical feasibility and versatility of the solid sta ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  5. A Novel Electrochemical Machining Process for Hard Passive Alloys

    SBC: Faraday Technology, Inc.            Topic: N/A

    This Small Business Innovation Research Phase I project will demonstrate a novel process for electrochemical machining nickel superalloys and other hard, passive alloys. Nickel-based superalloys are widely used in various industries, such as aerospace and automative industries. However, nickel superalloys are difficult-to-cut materials. Traditional mechanical methods failed to machine these sup ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  6. Design of Superelastic Nitinol Enhanced Puncture Resistant Armor

    SBC: Garman Systems Inc.            Topic: N/A

    Proposed is an investigation into the use of flexible, extremely strong and tough, superelastic Nitinol shape memory alloy as a means of dramatically improving puncture resistance for personnel body armor. The Nitinol material is proposed as a surface material or coating for reinforcement or organic fiber fabrics and/or composites or aramid and UHMW polyethylene used in the current body armor sys ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  7. Dynamic Magnetic Consolidation (DMC) Process for Fabricating Advanced Nanostructured Components from Nano Powders

    SBC: IAP RESEARCH, INC.            Topic: N/A

    This SBIR project of Phase I proposes to develop and advance a process technology called Dynamic Magnetic Compaction (DMC). This technology will be useful for fabricating nanostructured components of various material systems such as ceramics, metals, high temperature alloys, and composites from their respective nano powders. The fabrication of nano components from nano powders requires the conso ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  8. Low Weight, Zero Maintenance Long Endurance SOFC for MUAV

    SBC: IGR Enterprises, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  9. Model Neutral Data Representation Using the Theory of Corobs

    SBC: LAWRENCE TECHNOLOGIES, LLC            Topic: N/A

    We propose to demonstrate a powerful, general approach, the Theory of Corobs, to address DARPA's identified need for canonical data structure and access mechanisms to support model interoperability. The technology we will produce under this contract will enable the construction of robust data warehousing supporting a wide range of "looks" of the data to the outside world, true generic knowledge b ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  10. Virtual Environmental Training for Battlefield Medical Personnel

    SBC: LINCOM CORP.            Topic: N/A

    The Virtual Environment Training for Battlefield Medical Personnel (VETBMP) project is the development of a simulation architecture designed to integrate procedural simulations, intelligent tutoring, and various sensory input devices to create a realistic training scenario for 'forward' military personnel. Phase I of VETBMP will be a simulation of a standard medic task (intravenous infusion), emb ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government