List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Design of Superelastic Nitinol Enhanced Puncture Resistant Armor

    SBC: Garman Systems Inc.            Topic: N/A

    Proposed is an investigation into the use of flexible, extremely strong and tough, superelastic Nitinol shape memory alloy as a means of dramatically improving puncture resistance for personnel body armor. The Nitinol material is proposed as a surface material or coating for reinforcement or organic fiber fabrics and/or composites or aramid and UHMW polyethylene used in the current body armor sys ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  2. Integrated Remote Patient Care System

    SBC: Microdexterity Systems, Inc.            Topic: N/A

    MicroDexterity Systems was founded by Steve Charles, MD to develop systems for dexterity enhancement for microsurgery; a concept he originated in the mid 80's. Dexterity enhancement is a subset of tele-operation. The MDS mission statement was broadened in 1994 to address the problem of non-ferromagnetic tele-operation for intra-operative magnetic resonance imaging frequently called image guided ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  3. Crack Nucleation Prediction through Surface Roughness Measurement

    SBC: VEXTEC CORPORATION            Topic: SB072003

    Our commercial and military fleets operate safely but at a great cost. Downtime for structural inspections, elaborate sustainment equipment, long maintainer hours, expensive in-depot repair, continuous spectrum monitoring, and extensive component testing have effectively reduced the rates of structure-related accidents, but the costs are overwhelming. DARPA has proposed changing the paradigm of ai ...

    SBIR Phase I 2008 Department of DefenseDefense Advanced Research Projects Agency
  4. SBIR Phase I: Neural Network Methods for Robust System Identification

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    N/A

    SBIR Phase I 1996 National Science Foundation
  5. STTR PHASE I: Laser Vapor Deposition for thin film functional polymers and nanocomposites

    SBC: AppliFlex LLC            Topic: AM

    The Small Business Technology Transfer Research (STTR) Phase I project will demonstrate the commercial potential of laser vapor deposition (LVD), an innovative technology for depositing functional thin films of electronic polymers and nanomaterials. In the LVD process, resonant infrared laser excitation of organic or polymer targets produces a vapor of intact material that can be deposited. LVDTM ...

    STTR Phase I 2008 National Science Foundation
  6. A COMMERCIAL SIMULATOR FOR HEALTH PHYSICS TRAINING

    SBC: Consultec Scientific            Topic: N/A

    RESEARCHERS ARE DEVELOPING AN INNOVATIVE NEW APPROACH TO LABORATORY TRAINING IN HEALTH PHYSICS, I.E., THE DEVELOPMENT OF A COMPUTER SIMULATOR THAT CAN BE USED IN PLACE OF ACTUAL RADIATION SOURCES IN LABORATORY TRAINING. SUCH A SIMULATOR RESULTS IN MUCH LOWER COST OF TRAINING, PROVIDES FOR A WIDER VARIETY OF TRAINING SITUATIONS, AND ELIMINATES THE SAFETY HAZARDS ASSOCIATED WITH ACTUAL RADIATION SOU ...

    SBIR Phase II 1996 National Science Foundation
  7. SBIR Phase I: Ultrasensitive Elemental Mercury Pollution Monitor

    SBC: Consultec Scientific            Topic: N/A

    N/A

    SBIR Phase I 1996 National Science Foundation
  8. SBIR PHASE I: The Development of a 600 MHz Wide Bore (89mm)High Resolution NMR Magnet with Internal Tin Wires

    SBC: Cryomagnetics, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 National Science Foundation
  9. SBIR Phase I: Surface Modification of Nonwovens Via Plasma Processing

    SBC: eSpin Technologies, Inc.            Topic: AM

    This Small Business Innovation Research Phase I research project will develop a low cost plasma treatment methodology capable of increasing adhesive strength between electrospun nanofibers and substrates, as well as change the functionality of nanofibers to develop functional textile material for various applications. The surface modification of substrates will be carried out using atmospheric pre ...

    SBIR Phase I 2008 National Science Foundation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government