You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Development of Endurable Thermal Barrier Coatings for Diesel Engine Specific Heat Reduction
SBC: ADIABATICS INC Topic: A04250The future generation of both military and commercial diesel engines will operate at significantly higher temperatures and pressures than today’s engines. The future combat system diesel engine operating parameters demand significant design improvement of power cylinder insulation. Increased cylinder pressure and reduced cooling requirements, heat energy recovery in the exhaust gas by turbocha ...
SBIR Phase II 2006 Department of DefenseArmy -
Compact Turbochargers for High Power Density Diesel Engines
SBC: ADIABATICS INC Topic: A05237A high-power density, Low Heat Rejection (LHR) diesel engine design for both traditional and hybrid Future Combat System (FCS) vehicle configurations is being proposed. Work under this proposal includes application of LHR engine technology to improve power density and life cycle durability of a military commercial diesel engine. This engine is General Engine Products, LLC.’s Optimizer 6500 HUM ...
SBIR Phase II 2006 Department of DefenseArmy -
Coupled Multibody Dynamics and Computational Fluid Dynamics Simulation of Liquid Sloshing for Tanker Vehicles
SBC: Advanced Science And Automation Corp Topic: A04238The objective of this proposal is to develop a tool for time-accurate simulation of coupled CFD and multibody dynamics of tanker vehicles and sloshing liquid payloads, that includes integrated pre-processor, solver, and post-processor. The pre-processor allows constructing an object-oriented hierarchical "preliminary" model of the vehicle, tank, and terrain. The pre-processor includes a model tree ...
SBIR Phase II 2006 Department of DefenseArmy -
Advanced Stress Measurement Technologies for Small Turbine Engines
SBC: AERODYN ENGINEERING, INC. Topic: A04083Aerodyn Engineering proposes to develop a new concept in slip ring design that could operate up to 90,000 RPM with 50 contacts (25 channels), be capable of handling temperatures up to 700°F without external cooling support, weigh less than 2 lb, and be designed to directly support new developments in small turbo-shaft engines.
SBIR Phase II 2006 Department of DefenseArmy -
Development of Endurable Thermal Barrier Coatings for Diesel Engine Specific Heat Reduction
SBC: ANALYTICAL ENGINEERING INC Topic: A04250The U. S. Army has a need for reliable and durable in-cylinder thermal barrier coatings to reduce high power density diesel engine component structural temperatures and heat rejection. Phase I program bench testing results identified thermal barrier coating topcoat systems that reduced radiant heat transfer by 40 % and improved durability by more than 100 %. Two types of topcoat systems that were ...
SBIR Phase II 2006 Department of DefenseArmy -
Security Amplification Through Data Splitting: Achieving High Security Using Moderately Secure Hardware
SBC: ARXAN RESEARCH, INC. Topic: OSD05A10For this project, we will research novel data-splitting techniques that can be used on COTS hardware to achieve similar effects as a specialized security processor, without relying upon expensive cryptographic operations. This is achieved through the technique of data splitting, and the use of k copies of the same moderately secure COTS hardware (where k is at least 2, and can be increased to inc ...
SBIR Phase I 2006 Department of DefenseArmy -
SBIR Phase I: Secure Software Rental and Subscription System
SBC: ARXAN RESEARCH, INC. Topic: EOThis Small Business Innovation Research Phase I research project advances the state of software licensing and distribution through the development of a secure software rental/subscription system. The proposed technology builds upon existing Digital Rights Management (DRM) and Electronic License Management (ELM) principles, as well as Arxan's state-of-the-art anti-tamper technology, to provide robu ...
SBIR Phase I 2006 National Science Foundation -
STTR Phase I: Growth of 3C-SiC Substrates using High-Temperature Chemical Vapor Deposition
SBC: BarSiC Semiconductors, LLC Topic: ELThis Small Business Technology Transfer (STTR) Phase I project aims at developing new material growth technology for manufacturing semiconductor substrates of cubic 3C-SiC polytype for high-power, high-frequency, high-temperature, and high-radiation hardness military, space, and commercial applications. The new process for SiC epitaxial growth utilizes novel mechanisms of gas phase and surface rea ...
STTR Phase I 2006 National Science Foundation -
SoundAlert- A Centralized System Capable of Alerting People Who are Deaf or Hard of Hearing Impaired of Critical Sounds in Their Environment
SBC: CREATEABILITY CONCEPTS INC Topic: N/AThe project is intended to result in a comprehensive system that delivers natural warning and communication mechanisms for persons with hearing loss. The SoundAlert system offers a unique approach to enable persons who are deaf or hard of hearing to: (1) initiate and receive emergency communications; (2) receive alerts in the workplace or home environments on a single, pocket-sized device throug ...
SBIR Phase II 2006 Department of Education -
Improved Hemorrhage Detection Technology for a Robotic HIFU Manipulator System
SBC: FOCUS SURGERY INC Topic: A05T032A low-risk, high-confidence, CSTAT-compatible HIFU hemostasis system that can be operated remotely was developed during Phase I to improve battlefield medicine to save lives. The system is based on a 23 channel annular HIFU phased array with a built-in co
STTR Phase II 2006 Department of DefenseArmy