List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Wireless EMG and Improved Mounting System

    SBC: MOTION CONTROL, INC            Topic: N/A

    The project focuses on the development of a small, water-proof elecromyographic (EMG) sensor for a myoelectric arm prosthesis that transmits by a wireless link and can be easily and consistently installed over any muscle site. The wireless link eliminates wires and connectors inside the arm socket that can be bulky and unreliable due to corrosion and breakage of wires representing a significant i ...

    SBIR Phase I 2006 Department of Education
  2. Wireless EMG Preamp and Improved Mounting System

    SBC: MOTION CONTROL, INC            Topic: N/A

    Develops a small waterproof Warless EMG Preamp sensor for myoelectric arm prostheses that transmits a digital signal via a wireless link eliminating many of the wires and connectors associated with arm prostheses and allowing connection to modern rollon gel type liners

    SBIR Phase I 2006 Department of Education
  3. STTR Phase I: Advanced Fuel Cell Energy-Management Electronics and Control for Microgrid

    SBC: Technology Holding, LLC            Topic: EL

    This Small Business Technology Transfer (STTR) PhaseI project will design, fabricate, and validate a novel low cost (under $40/kW), robust and high-power-density 3 kW fuel cell (FC) power-conditioning system (PCS) suitable for lower voltage FC stacks, comprising a high-frequency inverter (HFI) followed by a forced cyclo-converter, which yields the following features: (1) 300 kHz switching frequen ...

    STTR Phase I 2006 National Science Foundation
  4. SBIR Phase II: Multi-Environment Probability Density Function (PDF) Method for Modeling Turbulent Combustion Using Detailed Chemistry

    SBC: Reaction Engineering International            Topic: IT

    This Small Business Innovation Research (SBIR) Phase II project will extend the applicability of the multi-environment probability density function (MEPDF) method to model turbulent combustion problems with realistic chemical kinetics within comprehensive Computational Fluid Dynamic (CFD) simulations of practical combustion equipment. The project aims to further advance the MEPDF method by extendi ...

    SBIR Phase II 2006 National Science Foundation
  5. SBIR Phase II: T-Splines for Surface Intersection

    SBC: T-Spline Company            Topic: IT

    This SBIR Phase II project addresses what is considered to be a significant unsolved problem in the Computer-Aided Design (CAD) industry; the fact that many CAD models contain numerous small, unwanted holes or gaps. These gaps occur most often along the seams where two surfaces in a CAD model meet, such as where a wing meets the fuselage of an airplane, and result from fundamental mathematical lim ...

    SBIR Phase II 2006 National Science Foundation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government