You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. NANOFIBER NONWOVEN BASED AIRCREW PERSONNEL LOWERING DEVICE

    SBC: 3F LLC            Topic: AF06020

    Nanofiber nonwoven spunbonded materials technology is adapted for use in a personnel lowering device. The resulting device will be simple, easy to use, and relatively low cost.

    SBIR Phase I 2006 Department of DefenseAir Force
  2. Single ply 3Dwoven Functionally Gradient Multi-Fiber / Multi-Matrix Composites with Thermal Management Systems

    SBC: 3TEX, Inc.            Topic: AF04249

    In composites, not only can properties vary with load direction, fiber based composites also offer the unique ability to tailor material properties locally. Localized matrix or fiber architecture changes can meet local mechanical, electrical, or thermal loads within a component or vehicle, without weight penalty or resort to additional external structures. In Phase I, the team used 3TEX 3-D wea ...

    SBIR Phase II 2006 Department of DefenseAir Force
  3. Integrally 3D Woven/3D Braided Composite Joining Elements For Ship Construction

    SBC: 3TEX, Inc.            Topic: N04093

    During Phase I, 3TEX designed universal, one-piece, 3D woven fiber preforms which can be used as either a “Butt” (H) joint or as a “P” joint as needed. Composite joints were fabricated and tested, demonstrating the benefit of the integral nature of the 3D preforms. 3D stress/strain and crack propagation analysis of composite Π-joint was performed using 3D MOSAIC code. 3D displacement, st ...

    SBIR Phase II 2006 Department of DefenseNavy
  4. Novel Structural Joining Concepts Using 3-D Textile Preforms and Composites

    SBC: 3TEX, Inc.            Topic: AF05248

    Strength and durability of commonly used bonded and bolted composite-to-composite and composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic moduli, Poisson’s ratios, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature joint failure. The proposed work is focused on develop ...

    SBIR Phase II 2006 Department of DefenseAir Force
  5. 3-D Fiber Reinforced, Thermally Conductive Rotor Sheaths

    SBC: 3TEX, Inc.            Topic: N06T013

    Military helicopters rotors contend with rain, ice, sand, and flying debris. To prevent damage to the expensive blade protective sheaths or coatings are applied to the leading edge of the rotor blades. A 3-D woven composite sheath with high thermal conductivity fibers running through the thickness can offer the best qualities of both metal sheaths and elastomer coatings. Infused with an elastom ...

    STTR Phase I 2006 Department of DefenseNavy
  6. Improved Miller Fasteners Based on 3-D Braided Preforms

    SBC: 3TEX, Inc.            Topic: N06033

    Miller Fasteners made from 2-D laminates represent the state of the art in joining CMC panels to metal frames. Despite its success, the extant Miller fastener design is limited by its construction from a laminate of 2-D fabric. The resultant fastener part has poor interlaminar shear strength, and its manufacture and application entails high machining costs and high material scrap rates. 3TEX, i ...

    SBIR Phase I 2006 Department of DefenseNavy
  7. SBIR Phase I: An Innovative Photobioreactor for Commercial Production of Astaxanthin from Genetically Improved Haematococcus Pluvialis Strains

    SBC: ALGAEN CORPORATION            Topic: BT

    This Small Business Innovative Research (SBIR) Phase I project aims to develop an innovative large-scale photobioreactor for production of natural astaxanthin from Haematococcus strains. The phase I research plan is to construct and evaluate an innovative modular flat-plate photobioreactor for mass culture of the organism. The improved production system, along with a genetically improved Haematoco ...

    SBIR Phase I 2006 National Science Foundation
  8. MEMS-Based Optical Beam Steering System for Multi-Color 2D Spot Arrays

    SBC: Applied Quantum Technologies            Topic: A06T010

    Optically addressing a large number of atoms trapped in a periodic lattice would be a critical missing technology necessary to achieve scalable quantum computation. A micro-electromechanical systems (MEMS) based beam steering optical system is proposed to meet the needs of this topic. The system utilizes (a set of) tilting mirrors to create reconfigurable spots on a target of square lattice. The s ...

    STTR Phase I 2006 Department of DefenseArmy
  9. Unstructured Fixed Grid with Moving Body, Navier-Stokes Computational Fluid Dynamic (CFD) Solver for Simulating Gas Flows

    SBC: CORVID TECHNOLOGIES, LLC            Topic: MDA04136

    In this PhaseII SBIR effort, Corvid Technologies completes the development of an innovative approach for solving Unstructured Fixed Grid Navier-Stokes CFD flow simulations. The proposed approach developed at Corvid is referred to as the Virtual Geometry Insertion (VGI) technique. This approach allows for the virtual insertion of arbitrary geometric components into a standard CFD analysis. This g ...

    SBIR Phase II 2006 Department of DefenseMissile Defense Agency
  10. Insensitive Munitions Modeling and Simulation

    SBC: CORVID TECHNOLOGIES, LLC            Topic: A05201

    The objective of this proposal is to improve the computational tools identified in Phase 1 that will be useful in assessing rocket and missile propulsion systems for compliance with insensitive munitions (IM) requirements. Comprehensive testing to ascertain IM compliance for such systems is time-consuming and expensive. High-fidelity computational tools exist that can be used to address the asse ...

    SBIR Phase II 2006 Department of DefenseArmy
US Flag An Official Website of the United States Government