Award Data

Photon-X and Pilot AI will assess the feasibility of building a rangefinder that uses object shapes and Artificial Intelligence (AI) to better detect objects and estimate their range. The project will combine novel shape-sensing imaging technology with edge-optimized AI algorithms that can run on a small, battery-powered device. The key tasks of the project will be: Validate that a computer vision ...

IERUS is developing a novel phased array ground terminal aperture architecture for the DoD's next generation of satellite constellations. With the proliferation of high-bandwidth satellites across LEO, MEO, and GEO, there is a need for SWaP-C optimized user terminal apertures. The IERUS solution implements scalable and mission-set reconfigurable technologies to enable rapid transition into operati ...

Augmentation Systems (VAS) Range Finder. It provides opportunities for day/night observation and range measurement in a small, easy-to-use device. We tradeoff features and SWAP-C to determine optimal combinations and document them in a feasibility study. Novel methods of presenting ranges are further. investigated and discussed.

Attollo Engineering proposes to address the need for a quick-draw, pouch-storable laser rangefinder for day and night urban use. This self-contained unit will weigh less than 18 ounces and have a total volume less than 64 cubic inches. The system will provide post-fire target assurance, showing the operator where the laser landed on the target. In Phase I Attollo will survey and evaluate all relev ...

The objective of this VAS rangefinder Phase I SBIR effort is to complete key enabling trade studies which will inform the development of the range finder through a Phase II effort. The resulting VAS rangefinder will be a low-cost, easy-to-use device that is capable of operating 24/7 in urban or near-urban environments with ambient light sources.

CAMX Power proposes a Sequential Phase II program to follow on the Phase II DLA SBIR program “Logistically Robust, Long Life, High Power Rechargeable Battery”.  In the initial Phase II program, we designed, built, and tested a 6T Li-ion battery prototype based on CAMX Power’s proprietary cathode and zero-volt (0V)-capable high power cell technology.  The prototype and test modules were dem ...

For this Phase II, Parts Life, Inc. is proposing to improve product availability and increase competition through the development of Source Approval Requests (SAR) for NSNs 5330-00-992-1516 Seal Ring Metal, 5330-00-798-2704 Seal Ring Metal, 5330-00-796-9180 Gasket, 5331-01-010-2929 O-Ring, 5331-00-425-9124 O-Ring, 5331-00-618-3447 O-Ring, 4820-01-202-6339 Seat, Valve, 5310-00-164-1100 Wash ...

Near term fielding of Hypersonic vehicles will rely upon readily available and proven materials like refractory metals that are at an MRL of 9.  In some cases, these metals may require environmental protective coatings; these metal alloys could be based upon Tungsten (W), Niobium (Nb), or Hafnium (Hf).  Refractory materials typically survive high temperatures but oxidize under high temperatures ...

The DLA has a need to identify competent and qualified domestic suppliers for mission-critical items that are becoming increasingly scarce. To combat the obsolescence issue, Mentis Sciences Inc. (Mentis) proposes a qualification effort for Bleed Air Ducting for the C-5 Galaxy Air Vehicle (C-5). Mentis understands the importance of supporting the C-5 and maintaining a strong supply chain for compon ...

Following the research performed in Phase I, GDCA proposes to rebuild the supply chain and manufacturing capability to create a form-fit-functional New Source of Supply for NSN 7730-01-532-4524 to avoid CASREPs and provide a long-term manufacturing source. GDCA will accomplish this by using the original technical data to rebuild the manufacturing capability as the OEM did, and solve DMSMS componen ...