List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase II 1998 Department of DefenseNavy
  2. Inflatable Spacecraft Using &quotRigidization On Command&quotTechnology

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  3. SBIR Phase I: Tertiary Recycling Process for Polymer-Based Automotive Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1998 National Science Foundation
  4. An Optical Sensor for Monitoring Odors at Agricultural Livestock Facilities

    SBC: AeroSurvey, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Agriculture
  5. Affordability-driven, Microwave Curing for Reversible Bonding of Composites

    SBC: AEROTECH ENGINEERING & RESEARCH CORP.            Topic: N/A

    Fastening and joining technology has lagged behind the progress that has been made in other areas of composites for advanced air vehicles. Aerotech proposes the development of reversible polymeric adhesive bonding of composites using variable frequency microwave energy. With this method, composites are bonded using Poly Ether Ether Ketone (a high temperature thermoplastic) which is cured using v ...

    SBIR Phase II 1998 Department of DefenseAir Force
  6. GPS-Based Animal Control System

    SBC: AgriTech Electronics, L.C.            Topic: N/A

    This is a Phase II proposal to continue the work begun by AgriTech Electronics, LC (AgriTech) on a GPS-based livestock control system. This system will exclude animals from areas, or contain them within defined boundaries, where it is impractical or inefficient to build fence to achieve this objective. These needs arise in a variety of contexts, including the exclusion of livestock from riparian a ...

    SBIR Phase I 1998 Department of Agriculture
  7. Imaging Fractures and Fracture Systems to Assess Reservoir Properties

    SBC: ANALYTICAL MECHANICS ASSOCIATES, INC.            Topic: N/A

    50540-98-I Imaging Fractures and Fracture Systems to Assess Reservoir Properties--American Spectrum Engineering and Science Services, 5010 Grand Central Drive, Morgantown, WV 26505-4797; (304) 284-9144 Mr. William K. Overbey, Jr., Principal Investigator Mr. William K. Overbey Jr., Business Official DOE Grant No. DE-FG02-98ER82528 Amount: $74,694 Many fractured gas reservoirs could be produced ...

    SBIR Phase I 1998 Department of Energy
  8. Electro-magnetic Flak for Cruise and Sea Skimming Missile Defense

    SBC: Applied Physical Electronics, L.C.            Topic: N/A

    The electromagnetic directed energy method (lasers, particle beams, and high power microwaves) of defending against missiles relies on generating a large amount of energy at the defense site, locating the target, and then transporting a large fraction of that energy to the target along a line of sight at the speed of light, to either destroy or destabilize the threat at as long range as possibl ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  9. Pro FEA: A General Purpose Graphically-Based Probabilistic Finite Element Analysis System

    SBC: Applied Research Associates, Inc.            Topic: N/A

    This Phase I SBIR will develop a general purpose probabilistic finite element analysis system, ProFEA, that allows designers to perform probabilistic finite element analysis in a graphical environment that is completely familiar and similar to modern deterministic FEA. We have developed an innovative architecture that takes advantage of emerging file exchange and database standards (I ...

    SBIR Phase II 1998 Department of DefenseAir Force
  10. Prediction of Launch Vehicle Ignition Overpressure and Liftoff Acoustic Environments

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government