You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Depot and Field-deployable Reconfigurable Tooling Systems for Repair, Replacement, Prototyping and Low-Rate Production of Composite Parts

    SBC: 2PHASE TECHNOLOGIES, INC.            Topic: A03045

    The company's reformable, reusable tooling tooling will be provided within a complete composites manufacturing cell that can substantially reduce the time, cost and effort associated with conventional or alternative tooling while providing the flexibility for repair, design and prototyping, and short-run or low rate manufacture. This Phase II project addresses the use of reformable tooling toolin ...

    SBIR Phase II 2005 Department of DefenseArmy
  2. Advanced Military Diesel Engine Technologies Demonstrator

    SBC: Advanced Engines Development Corporation            Topic: A05237

    Combining AED Corp. and its multi-disciplinary team's extensive and unique heavy fuel engine (HFE) hardware development experience with commercial-off-the-shelf (COTS) diesel engine components, a concept diesel engine demonstrator (CDED) will be designed. Configured to facilitate dyno test exploration of power density, heat rejection, and fuel efficiency, the lubrication, cooling, and supercharger ...

    SBIR Phase I 2005 Department of DefenseArmy
  3. Affordability-driven, Microwave Curing for Reversible Bonding of Composites

    SBC: AEROTECH ENGINEERING & RESEARCH CORP.            Topic: N/A

    Fastening and joining technology has lagged behind the progress that has been made in other areas of composites for advanced air vehicles. Aerotech proposes the development of reversible polymeric adhesive bonding of composites using variable frequency microwave energy. With this method, composites are bonded using Poly Ether Ether Ketone (a high temperature thermoplastic) which is cured using v ...

    SBIR Phase II 1998 Department of DefenseAir Force
  4. Electro-magnetic Flak for Cruise and Sea Skimming Missile Defense

    SBC: Applied Physical Electronics, L.C.            Topic: N/A

    The electromagnetic directed energy method (lasers, particle beams, and high power microwaves) of defending against missiles relies on generating a large amount of energy at the defense site, locating the target, and then transporting a large fraction of that energy to the target along a line of sight at the speed of light, to either destroy or destabilize the threat at as long range as possibl ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  5. Active RF Circulators

    SBC: Applied Radar, Inc.            Topic: SB052016

    Applied Radar Inc. proposes the development of active MMIC-based circulators in order to achieve high isolation between transmit and receive paths for simultaneous transmit and receive (STAR) phased-array radar system architectures. This technology will enable increased persistence in intelligence, surveillance and reconnaissance (ISR) systems and allow multiple simultaneous radar modes including ...

    SBIR Phase I 2005 Department of DefenseDefense Advanced Research Projects Agency
  6. 3-D Woven Conformal Antenna Structures

    SBC: Applied Radar, Inc.            Topic: AF05238

    Applied Radar proposes to investigate a new method of incorporating microwave antenna and feed components directly into airframe structural members. This method is based on the 3-D weaving of a resin transfer molded (RTM) fiber reinforcement preform that meets both RF and structural requirements. The result will be lighter weight, higher performance radar and communications antenna arrays for both ...

    SBIR Phase I 2005 Department of DefenseAir Force
  7. Waterborne Transport Modeling Capability

    SBC: APPLIED SCIENCE ASSOC.            Topic: DTRA05013

    The Defense Threat Reduction Agency has expressed the need for waterborne transport and dispersion capability to compliment its existing models for Chemical, Biological, Radiological and Nuclear (CBRN) releases. DTRA's current capability is limited to the atmospheric transport of CBRN agents using the HPAC system. The objective of this proposed Phase I study is to couple Applied Science Associat ...

    SBIR Phase I 2005 Department of DefenseDefense Threat Reduction Agency
  8. Multipoint Exploding foil Initiator System

    SBC: ARC TECHNOLOGY LLC            Topic: A05209

    This proposal details the development of a multipoint exploding foil initiator trigger system that enables programmable delays between EFI detonations. The temporal jitters are less than 50 ns from the initial trigger signal to the firing of each EFI. This enables precise control of the detonation wave in an explosive from multiple initiation points. The system is comprised of a control module ...

    SBIR Phase I 2005 Department of DefenseArmy
  9. Development of a Concept for Swarmed mini-UAVs for Automatic Target Recognition

    SBC: Augusta Systems, Inc.            Topic: N04T005

    The objective of this project is to develop algorithms controlling the high level flight pattern of Unmanned Aerial Vehicles (UAVs) utilizing swarming technology in a manner to maximize Automatic Target Recognition (ATR) performance for a selected algorithm through cooperative search operations involving a larger number of inexpensive UAVs. Based upon the success and results of the Phase I work, ...

    STTR Phase II 2005 Department of DefenseNavy
  10. Small Craft Vision Enhancement/Situation Awareness System

    SBC: AZIMUTH INC            Topic: N/A

    Small military maritime craft are responsible for the expedient delivery of personnel to an area(s) that will allow for the successful accomplishment of mission objectives. Often these craft are required to operate in littoral (shoreline) areas under various extreme conditions. It is therefore vital that an All-Weather Vision Enhancement / Situation Awareness System be designed and developed tha ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government