You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Conversion Process for Legacy Stable Based Printed Circuit Board Atrwork

    SBC: Aci Technologies Inc            Topic: N/A

    Master artwork for Air Force systems is traditionally delivered on polyester-based mylar film. This film tends to degrade over time, even when stored in climate-controlled facilities. In addition, drawings must be digitized before circuit boards can be manufactured, which is an expensive and time consuming step. A reliable and repeatable artwork conversion process is needed.This project will pe ...

    SBIR Phase I 1998 Department of DefenseAir Force
  2. Design, Manufacture, and Test of an Underwater Acoustic Intensity Probe

    SBC: Acoustech Corporation            Topic: N/A

    The Acoustech Corporation as the prime contractor and the Pennsylvania State University - Applied Research Labc-atory as the subcontractor propose to design, manufacture, and test an underwater acoustic intensity probe containing a geophone and two-hydrophones encased in a neutrally buoyant package. The results of this proposed effort are anticipated to be highly successful since the researc ...

    SBIR Phase II 1998 Department of DefenseOffice of the Secretary of Defense
  3. PCMCIA Card to Collect/Store Vibration/Performance Data for Operating Machinery

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    A major objective of the proposed work is to generate a preliminary design for a PCMCIA-based vibration data collection system that provides better portability, a higher level of standardization and greater cost-effectiveness than is currently The feasibility of a PCMCIA carbased vibration data collection system will be studied using the results of a self-funded program to develop a ...

    SBIR Phase I 1998 Department of DefenseNavy
  4. Advanced Field-Use Instrument for Nondestructive Fatigue Damage Assesment and Remaining Service Life Prediction for Aging Aerospace Systems

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    During Phase I, we will develop the technology for a field use instrument to determine the residual stress, fatigue damage and remaining service life for aging metal structures. The technology will be based on a state-of -the-art wide-angle x-ray detector recently developed at ATMI. The life span estimation will use the measured micro-defect density to compare to a paramedic life span map based ...

    SBIR Phase I 1998 Department of DefenseAir Force
  5. A Simple Process to Manufacture Grain Aligned Permanent Magnets

    SBC: Advanced Materials Corp            Topic: N/A

    52 A Simple Process to Manufacture Grain Aligned Permanent Magnets--Advanced Materials Corporation, 700 Technology Drive, P.O. Box 2950, Pittsburgh, PA 15230-2950; (412) 268-5649 Mr. Vijay K. Chandhok, Principal Investigator Dr. S.G. Sankar, Business Official DOE Grant No. DE-FG02-97ER82313 Amount: $74,840 Electromechanical devices that incorporate permanent magnets are inherently superior i ...

    SBIR Phase II 1998 Department of Energy
  6. A Novel Technique for the Enhancement of Coercivity in High Energy Permanent Magnets

    SBC: Advanced Materials Corp            Topic: N/A

    51 A Novel Technique for the Enhancement of Coercivity in High Energy Permanent Magnets--Advanced Materials Corporation, 700 Technology Drive, P.O. Box 2950, Pittsburgh, PA 15219-3124; (412) 268-5649 Dr. S.G. Sankar, Principal Investigator Dr. S.G. Sankar, Business Official DOE Grant No. DE-FG02-97ER82314 Amount: $73,130 Improvements in the properties of permanent magnets are important to ena ...

    SBIR Phase II 1998 Department of Energy
  7. An Optical Sensor for Monitoring Odors at Agricultural Livestock Facilities

    SBC: AeroSurvey, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Agriculture
  8. Affordability-driven, Microwave Curing for Reversible Bonding of Composites

    SBC: AEROTECH ENGINEERING & RESEARCH CORP.            Topic: N/A

    Fastening and joining technology has lagged behind the progress that has been made in other areas of composites for advanced air vehicles. Aerotech proposes the development of reversible polymeric adhesive bonding of composites using variable frequency microwave energy. With this method, composites are bonded using Poly Ether Ether Ketone (a high temperature thermoplastic) which is cured using v ...

    SBIR Phase II 1998 Department of DefenseAir Force
  9. Emzyme-Polymers for Nerve Agent Decontamination

    SBC: AGENTASE LLC            Topic: N/A

    This Phase I research proposal is directed at demonstrating the feasibility of decontaminating nerve agents on sensitive surfaces and equipment using enzyme-containing polymers. Nerve agent hydrolyzing enzyme polymers have distinct advantages over conventional technologies for agent degradation as they are compatible with biological tissues and wound sites, highly specific for chemical agents, an ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  10. Development of a Natural Multiporous Cellulose Fiber for Industrial Applications

    SBC: AgResearch International, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Agriculture
US Flag An Official Website of the United States Government