List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Generating Autoclave-Level Mechanical Properties with Out-of-Autoclave Thermoplastic Placement of Large Composite Aerospace Structures

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: T702

    While in the 1970's and 1980's, composites were adopted for aerospace structure for increased performance and weight savings, the 1990's and 2000's witnessed the attention towards cost-effective fabrication. All thermoset processes that utilize such machines rely on autoclaves to consolidate the laminates, at significant acquisition and operational expense. Autoclaves to consolidate wings are hu ...

    STTR Phase II 2009 National Aeronautics and Space Administration
  2. Variable Cell Blanket Sandwich Panel Technology

    SBC: Benecor, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  3. Reusable In Situ AirCore System for CO2 and Trace Gas Measurements

    SBC: KALSCOTT ENGINEERING INC            Topic: S108

    A novel design for an in situ atmospheric sensor for CO2 and trace gases is proposed. The sensor, named AirCore, provides the advantages of existing in situ sensors (e.g. high resolution) but eliminates possible biases in analysis that often originate from imperfect measurement condition. The AirCore provides a significant savings in cost and weight while increasing the capabilities of existing ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  4. A High Reliability Frequency Stabilized Semiconductor Laser Source

    SBC: Princeton Optronics            Topic: S101

    NASA needs high stability laser source of 1W output power for Lidar applications. Princeton Optronics has developed ultra-stable, narrow linewidth diode pumped solid state lasers using stable packaging and high performance locker. We have also developed high power Vertical Cavity Surface Emitting Laser (VCSEL) semiconductor laser sources. We propose to develop a high reliability master oscillator ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  5. Miniature, Rugged, Pulsed Laser Source for LIDAR Application

    SBC: Princeton Optronics            Topic: S101

    Princeton Optronics proposes to develop a high energy pulsed laser source based on a novel approach. The approach consists of a technique to combine a large number of diode pumped solid state lasers. The resulting laser can be packaged in a very small package. We will develop the laser and package it into a laser welded package which can be space qualified. We can achieve 50mJ or higher level of e ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  6. Novel Photonic RF Spectrometer

    SBC: SPECTRUM MAGNETICS LLC            Topic: S104

    Leveraging on recent breakthroughs in broadband photonic devices and components for RF and microwave applications, SML proposes a new type of broadband microwave spectrometer with performance and affordability that were not attainable before. The photonic microwave spectrometer overcomes the constrains associated with microwave electronics, linearly and simultaneously offering 6-18 GHz (potential ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  7. Carbon Foam Self-Heated Tooling for Out-of-Autoclave Composites Manufacturing

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: X406

    This proposal addresses NASA's need for non-autoclave composites manufacture. The Constellation program, including the Ares V launch vehicle, will require very large-scale structures and conventional autoclave-based composites which are very costly and suffer from logistical problems. Out of autoclave (OOA) composite manufacturing technology has the potential to solve the constraint issues of aut ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  8. Ultra-Thin Ply Formable Material from Reusable Short Carbon Fiber Composites

    SBC: Composites Automation LLC            Topic: T12

    This project develops an ultra-thin and formable prepreg material from reusable short carbon fiber composites (CFC), including process and material development, test panel fabrication and mechanical performance evaluation. Key to superior performance of ultra-thin ply materials is the ability to fabricate high fiber volume and uniform fiber distribution prepreg with low void content and layer thic ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  9. High-Resolution Scanning of Sub-Surface Lunar Water with Mobile Neutron Energy Spectrometer

    SBC: Radiation Detection Technologies, Inc.            Topic: H2

    This proposal describes a mobile solid-state Neutron Energy Spectrometer (NES) for lunar soil moisture determination. Cosmic-ray interactions within the lunar soil will yield secondary neutrons and protons, among other particles. The produced neutrons will travel within the soil, scattering off of materials such as hydrogen. Interactions with hydrogen will greatly reduce the energy of the neutrons ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  10. Smart Fault Management (SFM)

    SBC: TMC Technologies of WV Corp            Topic: S5

    The Phase I of the SBIR “Smart Fault Management” project aims to demonstrate how the fault management process can be innovated by exploiting concepts from a combination of well-established and emerging disciplines such as Bayesian Statistics, GPU-accelerated numerical simulations, Data Science, and Machine Learning that are disrupting the current status quo in many scientific and engin ...

    SBIR Phase I 2018 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government