List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Generating Autoclave-Level Mechanical Properties with Out-of-Autoclave Thermoplastic Placement of Large Composite Aerospace Structures

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: T702

    While in the 1970's and 1980's, composites were adopted for aerospace structure for increased performance and weight savings, the 1990's and 2000's witnessed the attention towards cost-effective fabrication. All thermoset processes that utilize such machines rely on autoclaves to consolidate the laminates, at significant acquisition and operational expense. Autoclaves to consolidate wings are hu ...

    STTR Phase II 2009 National Aeronautics and Space Administration
  2. Variable Cell Blanket Sandwich Panel Technology

    SBC: Benecor, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  3. Integration of Materials and Technologies into an Innovative, Low-Cost, Composite, Spray-Up Toolings System (STS)

    SBC: Global Aircraft Corp.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  4. Scramjet Combustion Stability Behavior Modeling

    SBC: GLOYER-TAYLOR LABORATORIES LLC            Topic: N/A

    A recent breakthrough in combustion stability analysis (UCDS) offers the means to accurately predict the combustion stability of a scramjet. This capability is very important due to the extreme scramjet operational environment, which makes cut-and-try development approaches impractical. With UCDS, it is now possible to accurately predict the scramjet pressure oscillation amplitudes, along with c ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  5. Reusable In Situ AirCore System for CO2 and Trace Gas Measurements

    SBC: KALSCOTT ENGINEERING INC            Topic: S108

    A novel design for an in situ atmospheric sensor for CO2 and trace gases is proposed. The sensor, named AirCore, provides the advantages of existing in situ sensors (e.g. high resolution) but eliminates possible biases in analysis that often originate from imperfect measurement condition. The AirCore provides a significant savings in cost and weight while increasing the capabilities of existing ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  6. Non Intrrusive, On-line, Simultaneous Multi-Species Impurity Monitor in Hydrogen

    SBC: Mississippi Ethanol, LLC            Topic: T901

    The purity of hydrogen fuel is important in engine testing at SSC. The hydrogen may become contaminated with nitrogen, argon, helium or oxygen. The hydrogen from the fuel tank s or feed lines is analyzed beforehand. Therefore, there is a need for a non-intrusive, on-line, near real-time monitor for H2. The analytical technique should measure various impurities (molecular and atomic) simultaneousl ...

    STTR Phase II 2009 National Aeronautics and Space Administration
  7. A High Reliability Frequency Stabilized Semiconductor Laser Source

    SBC: Princeton Optronics            Topic: S101

    NASA needs high stability laser source of 1W output power for Lidar applications. Princeton Optronics has developed ultra-stable, narrow linewidth diode pumped solid state lasers using stable packaging and high performance locker. We have also developed high power Vertical Cavity Surface Emitting Laser (VCSEL) semiconductor laser sources. We propose to develop a high reliability master oscillator ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  8. Miniature, Rugged, Pulsed Laser Source for LIDAR Application

    SBC: Princeton Optronics            Topic: S101

    Princeton Optronics proposes to develop a high energy pulsed laser source based on a novel approach. The approach consists of a technique to combine a large number of diode pumped solid state lasers. The resulting laser can be packaged in a very small package. We will develop the laser and package it into a laser welded package which can be space qualified. We can achieve 50mJ or higher level of e ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  9. Novel Photonic RF Spectrometer

    SBC: SPECTRUM MAGNETICS LLC            Topic: S104

    Leveraging on recent breakthroughs in broadband photonic devices and components for RF and microwave applications, SML proposes a new type of broadband microwave spectrometer with performance and affordability that were not attainable before. The photonic microwave spectrometer overcomes the constrains associated with microwave electronics, linearly and simultaneously offering 6-18 GHz (potential ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  10. Carbon Foam Self-Heated Tooling for Out-of-Autoclave Composites Manufacturing

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: X406

    This proposal addresses NASA's need for non-autoclave composites manufacture. The Constellation program, including the Ares V launch vehicle, will require very large-scale structures and conventional autoclave-based composites which are very costly and suffer from logistical problems. Out of autoclave (OOA) composite manufacturing technology has the potential to solve the constraint issues of aut ...

    SBIR Phase I 2009 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government