List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Innovative Affordable Head-Mounted General Aviation Pilot Information System

    SBC: Avrotec, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  2. Variable Cell Blanket Sandwich Panel Technology

    SBC: Benecor, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  3. A Low-Power, Low-Cost electron gun for Microwave Power Modules

    SBC: E BEAM INC            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  4. INTEGRATED CRYOGENIC HELIUM SYSTEM FOR EXTENDED DURATION BALLOON FLIGHTS

    SBC: GSSL Inc            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  5. Reusable In Situ AirCore System for CO2 and Trace Gas Measurements

    SBC: KALSCOTT ENGINEERING INC            Topic: S108

    A novel design for an in situ atmospheric sensor for CO2 and trace gases is proposed. The sensor, named AirCore, provides the advantages of existing in situ sensors (e.g. high resolution) but eliminates possible biases in analysis that often originate from imperfect measurement condition. The AirCore provides a significant savings in cost and weight while increasing the capabilities of existing ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  6. Ultra-High Resolution, Color, Back-Illuminated Ccd Camera

    SBC: PIXELVISION, INC.            Topic: N/A

    N/A

    SBIR Phase II 1998 National Aeronautics and Space Administration
  7. Low Light Level Ccd And Fused Heterojunction Avalanche Solid State Ccd Imager For 0.4 To 2.0 Micron Vis And Nir Imaging

    SBC: PIXELVISION, INC.            Topic: N/A

    N/A

    SBIR Phase II 1998 National Aeronautics and Space Administration
  8. Applications of Single-Walled Carbon Nanotubes

    SBC: ReyTech Corporation            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  9. Flexible Tube-Based Network Control

    SBC: Innovation Laboratory, Inc., The            Topic: A301

    The Innovation Laboratory, Inc. builds a control system which controls the topology of an air traffic flow network and the network flow properties which enables Air Traffic Management (ATM) to adapt to hazardous weather constraints and provide high capacity flows in the National Airspace System (NAS). The Network Flow Organizer automatically adjusts the flows of air traffic with respect to weather ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  10. Carbon Foam Self-Heated Tooling for Out-of-Autoclave Composites Manufacturing

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: X406

    This proposal addresses NASA's need for non-autoclave composites manufacture. The Constellation program, including the Ares V launch vehicle, will require very large-scale structures and conventional autoclave-based composites which are very costly and suffer from logistical problems. Out of autoclave (OOA) composite manufacturing technology has the potential to solve the constraint issues of aut ...

    SBIR Phase I 2009 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government