You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. COMMUNITY BUILDING STRATEGIES FOR INCLUSIVE CLASSROOMS

    SBC: EDGE ENTERPRISES, INC.            Topic: N/A

    N/A

    SBIR Phase II 1998 Department of Health and Human Services
  2. Variable Cell Blanket Sandwich Panel Technology

    SBC: Benecor, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  3. Reusable In Situ AirCore System for CO2 and Trace Gas Measurements

    SBC: KALSCOTT ENGINEERING INC            Topic: S108

    A novel design for an in situ atmospheric sensor for CO2 and trace gases is proposed. The sensor, named AirCore, provides the advantages of existing in situ sensors (e.g. high resolution) but eliminates possible biases in analysis that often originate from imperfect measurement condition. The AirCore provides a significant savings in cost and weight while increasing the capabilities of existing ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  4. Carbon Foam Self-Heated Tooling for Out-of-Autoclave Composites Manufacturing

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: X406

    This proposal addresses NASA's need for non-autoclave composites manufacture. The Constellation program, including the Ares V launch vehicle, will require very large-scale structures and conventional autoclave-based composites which are very costly and suffer from logistical problems. Out of autoclave (OOA) composite manufacturing technology has the potential to solve the constraint issues of aut ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  5. RBAC-based Workflow

    SBC: Virtual Globe, Inc. (Rockwise)            Topic: N/A

    Role-based workflow (RBW) is a NIST invention that used RBAC technology to implement workflow, with the goal of making workflow easier to maintain and more secure. At this time, Virtual Global has completed a Phase I SBIR effort, in which computer software was created to automate the invention in the form of web services. The Phase I effort was successful in proving the feasibility of the inventio ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  6. Affordability-driven, Microwave Curing for Reversible Bonding of Composites

    SBC: AEROTECH ENGINEERING & RESEARCH CORP.            Topic: N/A

    Fastening and joining technology has lagged behind the progress that has been made in other areas of composites for advanced air vehicles. Aerotech proposes the development of reversible polymeric adhesive bonding of composites using variable frequency microwave energy. With this method, composites are bonded using Poly Ether Ether Ketone (a high temperature thermoplastic) which is cured using v ...

    SBIR Phase II 1998 Department of DefenseAir Force
  7. Electro-magnetic Flak for Cruise and Sea Skimming Missile Defense

    SBC: Applied Physical Electronics, L.C.            Topic: N/A

    The electromagnetic directed energy method (lasers, particle beams, and high power microwaves) of defending against missiles relies on generating a large amount of energy at the defense site, locating the target, and then transporting a large fraction of that energy to the target along a line of sight at the speed of light, to either destroy or destabilize the threat at as long range as possibl ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  8. Small Craft Vision Enhancement/Situation Awareness System

    SBC: AZIMUTH, INC            Topic: N/A

    Small military maritime craft are responsible for the expedient delivery of personnel to an area(s) that will allow for the successful accomplishment of mission objectives. Often these craft are required to operate in littoral (shoreline) areas under various extreme conditions. It is therefore vital that an All-Weather Vision Enhancement / Situation Awareness System be designed and developed tha ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  9. Portable Multimodal Biometric Devices

    SBC: AZIMUTH, INC            Topic: N08210

    Historically, portable biometric collection systems have been designed for fixed Law Enforcement office applications. Their limitations stem from the fact that they were designed for specific hardware collection sensors optimized for a specific application. To a large extent the software is proprietary to a single vendor’s sensor suite and not designed to accept international character sets. Cur ...

    SBIR Phase I 2009 Department of DefenseNavy
  10. Suprises and Opportunities

    SBC: EMERGENT TECHNOLOGIES CORP.            Topic: N/A

    Emergent Technologies Corp. (ETC) in conjunction with research partners at West Virginia University has developed and recently patented an innovation antenna that promises to revolutionize the science of antenna design, construction and utilization. The antenna, labeled the Countrawound Toroidal Helical Antenna (CTTHA), offers a number of significant advantages over conventional antennas. The CT ...

    SBIR Phase I 1998 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government