Award Data

21st Century Systems, Inc. (2CSI, formed April 1996) proposes a tool suite which will combat architectural design errors in large-scale, high-assurance systems through systematic and intelligent simulation and modeling of alternate designs. The suite will feature a wide range failure analysis, identification, isolation, correction and management tools, and will make use of many innovative resourc ...

51015-98-I High-Voltage, Fast Turn-on and Turn-off Diamond Switch--Alameda Applied Sciences Corp., 2235 Polvorosa Avenue, Suite 230, San Leandro, CA 94577-2249; (510) 483-4156 Dr. Rahul R. Prasad, Principal Investigator Dr. Mahadevan Krishnan, Business Official DOE Grant No. DE-FG03-98ER82524 Amount: $75,000 Improvements in failure rates and reliability of current gas switches used for particl ...

Alameda Applied Sciences Corporation (AASC) proposes to develop two components of a three-component, survivable debris shield for large area test exposures to cold (1-5keV) x-rays. These elements also have commercial potential in accelerators and in radiography. The elements are: an ultrafast gas curtain designed to be located close to the x-ray source to deflect plasma debris as well as ~um siz ...

Alameda Applied Sciences Corporation (AASC) proposes to develop a new type of trigger for a high voltage, high repetition rate diamond switch. AASC has previously developed diamond switches with electron beam triggers. These switches handle 10-20 kV voltage pulses with

A Vacuum Arc Ion Source for Heavy Ion Fusion Applications DOE Grant No. DE-FG03-98ER86071 Amount: $100,000 Small Business Alameda Applied Sciences Corp. 2235 Polvorosa Avenue Suite 230 San Leandro, CA 94577-2249 Dr. Niansheng Qi, Principal Investigator Dr. Mahadevan Krishnan, Business Official (510) 483-4156 Research Institution Lawrence Berkeley National Laboratory Sponsored Projects Offic ...

N/A

THE U.S. AIR FORCE HAS AN INTEREST IN HIGH RATE, LOW COST, PRODUCTION PROCESSES FOR AIRCRAFT PARTS. ABARIS PROPOSES A COMBINED ANALYSIS AND TESTING PROJECT TO EXPLORE MODIFYING PRESENT RESIN TRANSFER MOLDING (RTM) TECHNIQUES TO EVALUATE THE FEASIBILITY OF THEIR USE IN THE PRODUCTION OF HIGH PERFORMANCE, AEROSPACE, COMPOSITE MATERIALS. EPOXY RESINS SHALL BE UTILIZED IN COMBINATION WITH GRAPHITE REI ...

THE U.S. ARMY HAS A NEED FOR A LIGHTWEIGHT, STRONG, MOBILE BRIDGE. ONE PROBLEM THAT LIMITS THE PERFORMANCE IS THE DESIGN OF ADHESIVE JOINTS. THIS PROJECT IS TO DEVELOP SEVERAL OPTIMUM JOINT DESIGNS SO THAT THE LOADS ON JOINTS OF EITHER TUBULAR AND FLAT COMPONENTS ARE IN SHEAR, AND THE STRESS CONCENTRATIONS ARE REDUCED. THE PROPOSED PROGRAM IS TO USE THE RESEARCH WE HAVE ACCOMPLISHED IN EXPERT SYST ...

N/A

The current problem of handling thousands of workflows and hundreds of tasks associated with these workflows within the current ALP architecture is enormous. In this effort we propose efficient and scalable data structure and algorithms that can order the workflows and associated tasks to be processed by the Assessor. In addition, we provide the capability to correlate workflows with actual logi ...