You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 1 - 10 of 10011 results
  1. Edge Computing and Sensor Fusion System for Comprehensive Monitoring of Traffic and Road Conditions

    SBC: AIWAYSION INC            Topic: 23FH2

    Real-time monitoring of traffic conditions is crucial for improving traffic safety and efficiency, and there is an urgent need for the development of in situ traffic sensing & computing technologies leveraging the recent advancements in edge computing. This project will develop an edge computing and sensor fusion system for comprehensive traffic and road conditions data collection and efficient tr ...

    SBIR Phase I 2023 Department of Transportation
  2. Novel Design for Passenger Railcar Retention Systems

    SBC: PROTECTION ENGINEERING CONSULTANTS LLC            Topic: 23FR2

    Additional passenger fatalities and injuries can occur in rollover-type derailment accidents due to failures of glazing retention mechanisms on passenger railcars. In recent accidents, a key failure mode is shearing off the external rubber gasket that secures the glazing panes as the side of the railcar drags along the ground. Once the gasket fails, the glazing pane is pushed inside, leaving an op ...

    SBIR Phase I 2023 Department of Transportation
  3. In-Field Magnetometry for Determination of Lithium Battery SOC

    SBC: TDA RESEARCH, INC.            Topic: 23PH3

    By 2030 the entire lithium-ion battery chain, from mining through recycling, is expected to reach a value of $400 billion and a market size of 4.7 TWh. LiB are used in personal electronic devices, e-bikes, tools, green-power storage and electric vehicles. Individual cells are commonly collected into packs or modules to provide the power required for automotive operation. The operational capability ...

    SBIR Phase I 2023 Department of Transportation
  4. DetectID: Improving the Detection of Impaired Driving Through Virtual Reality Training

    SBC: Innovation Research And Training, Inc.            Topic: 23NH2

    Impaired driving due to alcohol and drugs is a significant public health and safety problem in the U.S. The detection and enforcement of impaired driving laws are key to reducing this problem. Virtual reality training has the potential to support law enforcement officers in obtaining the necessary knowledge and skills to effectively detect impaired drivers. DetectID will be an immersive, accessibl ...

    SBIR Phase I 2023 Department of Transportation
  5. A Low-Cost High-Capacity Portable Stormwater Treatment System for Emerging Contaminants

    SBC: TDA RESEARCH, INC.            Topic: 23FH1

    The State Departments of Transportation (DOTs) have limited right-of-way (ROW) to construct stormwater treatment controls. Hence innovative self-contained portable stormwater treatment systems are needed to reduce impacts on streams, and other waters; recreation facilities, and habitat by addressing emerging stormwater pollutants, particularly the suspended and dissolved pollutants from highway co ...

    SBIR Phase I 2023 Department of Transportation
  6. Acoustic Internal Automated Concrete Tie Tester

    SBC: NDT CORPORATION            Topic: 23FR1

    NDT Corp. will take the currently developed ACTT system, which can accurately assess the internal condition of concrete crossties and increase its speed.FRA 23-FR1 requests a system that at high speeds can assess both the internal and external condition of concrete crossties.Currently there are systems that can perform the external assessment at the required speeds.However, there is no system that ...

    SBIR Phase I 2023 Department of Transportation
  7. Additive Manufacturing of Advanced Metallics

    SBC: TRITON SYSTEMS, INC.            Topic: MDA22T010

    The Missile Defense Agency is seeking innovative material and manufacturing processes for advanced metallic components for hypersonic flight systems. Triton Systems and their academic partner are proposing to develop the manufacturing and qualification evaluation techniques for reliable production of hypersonic environment appropriate metallic components at reduced cost and timelines compared to t ...

    STTR Phase I 2023 Department of DefenseMissile Defense Agency
  8. Flame-assisted Additive Manufacturing of Refractory Metals

    SBC: MAINSTREAM ENGINEERING CORP            Topic: MDA22T010

    FLame-assisted Additive Manufacturing (FLAMe) is a new method of AM in which the desired feedstock material is synthesized in a high temperature gas-phase combustion synthesis reaction and the resulting high temperature metal particles are accelerated and deposited onto a substrate in a user-defined pattern to construct a component. Gas-phase phase precursors allow for no limit on the melting poin ...

    STTR Phase I 2023 Department of DefenseMissile Defense Agency
  9. Improved Performance High Temperature Hypersonic Radome Materials

    SBC: NANOSONIC INC.            Topic: MDA22T011

    Through this MDA Phase I STTR program, NanoSonic shall work with the high energy laboratory at Penn State and with input from a major US integrator of hypersonic vehicles to develop improved high temperature radome materials for uncooled aerodynamic reentry and hypersonic vehicles. Through prior work, NanoSonic has developed and demonstrated high temperature materials with good thermal insulating ...

    STTR Phase I 2023 Department of DefenseMissile Defense Agency
  10. Hypersonic Seeker Window Attachment for Hypersonic Flight Systems

    SBC: FIRST RF CORPORATION            Topic: MDA22T011

    The harsh environment posed by hypersonic flight makes antenna design challenging due to extreme temperature exposure coupled with often competing mechanical/aero and RF performance requirements. FIRST RF proposes an advancement to its numerous conformal antenna technologies utilizing additive manufacturing of dielectric materials. This approach will decouple the competing RF and mechanical requir ...

    STTR Phase I 2023 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government