List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. SBIR Phase I: Commercial Scale Separation Modules with Integrated Sensors for Cost-Effective, Real-time Detection of Membrane Fouling

    SBC: Racing Testing LLC            Topic: CT

    The broader impact/commercial potential of this Small Business Innovation Research (SBIR) project is to significantly increase the efficiency and reduce operating costs for water produced by membrane-based desalination. Water scarcity is an increasingly important global-scale issue that has significant negative impacts on health, security and economies. Recent forecasts show a dramatic increase in ...

    SBIR Phase I 2018 National Science Foundation
  2. ECCCHO: Effective Combat Casualty Care Handoff Operations

    SBC: Tier 1 Performance Solutions, LLC            Topic: DHA17B002

    Approximately 70% of sentinel events in medical care are related to communication mishaps, and despite regular and frequent occurrence, an even higher percentage (80%) of severe medical errors are related to miscommunication during handoffs (i.e., the transferring of information, responsibility, and authority for patient care from one provider to another). The TiER1 team proposes to address challe ...

    STTR Phase I 2018 Department of DefenseDefense Health Program
  3. A scalable Additive Manufacturing Technology for Large Area Printed Circuit Boards

    SBC: UHV TECHNOLOGIES, INC.            Topic: 24e

    The goal of this SBIR project is to develop a scalable additive manufacturing technology for large area, multiple layer printed circuit boards and innovative novel micro-pattern gaseous detector (MPGD) architectures based on our proprietary confined electro-plating 3D printer to fabricate high conductivity copper features at room temperature. One of the key advantages of this technology is 3-D fab ...

    SBIR Phase II 2018 Department of Energy
  4. Fabrication of High-quality NaA Zeolite Membranes with a Novel Plate & Frame Configuration for Molecular-scale Mixture Separations

    SBC: NGIMAT, LLC            Topic: 15e

    Bioethanol has come into widespread use as fuel additives worldwide, especially in the U.S. and Brazil, aiming to mitigate CO2 emissions by up to 70% and sustain the carbon-neutral ecosystem. Generally, bioethanol in various fermentation broths has a maximum concentration of 6-8 wt.%. Hence, concentration of bioethanol from dilute streams poses a grand challenge from the standpoint of energy effic ...

    SBIR Phase II 2018 Department of Energy
  5. SBIR Phase I: Engaging the Mind and Body: Technology to Automate Physical Therapy Treatments for Patients with Parkinson's Disease (PD).

    SBC: Active Therapy Systems LLC            Topic: EW

    The broader impact/commercial potential of this project is to maximize the quality of life of patients currently suffering from Parkinson?s Disease (PD). Over 1 million Americans have been diagnosed with PD and this number is expected to double by 2040. PD is a neurodegenerative disorder without a cure ? once the first Parkinsonian tremor has been detected, over 80% of the brain cells associated w ...

    SBIR Phase I 2018 National Science Foundation
  6. STTR Phase I: A Mobile Triage Application for Reducing the Risk of COPD Exacerbations

    SBC: REVON SYSTEMS, INC            Topic: SH

    The broader impact/commercial potential of this Small Business Technology Transfer (STTR) project is the reduction of significant disease flare-ups in patients with Chronic Obstructive Pulmonary Disease (COPD), increase in patient quality-of-life, and a reduction of expensive and unnecessary healthcare utilization. Current at-home care support for COPD patients is often completely missing or consi ...

    STTR Phase I 2018 National Science Foundation
  7. Bi2212 Powder Production with Wide Tmax Window for High Field Magnet Applications

    SBC: NGIMAT, LLC            Topic: 26a

    Recently, Bi2212 wires fabricated with high quality Bi2212 powders have achieved short-term champion engineering critical current density Je ~1.9 kA/mm2 at 4.2 K and 5 T. However, such superior performance does not pass on to the superconducting coils due to the strong sensitivity of Je on Tmax. A ~37.0 cm long racetrack coil shows less than 70% Je of the corresponding high performance Bi2212 wire ...

    SBIR Phase I 2018 Department of Energy
  8. Innovative Technologies to Mitigate Experienced-Workforce Shortages

    SBC: Tier 1 Performance Solutions, LLC            Topic: 05a

    A crisis is brewing in the utilities industry. Out of date infrastructure and a rapidly retiring workforce contribute to a new generation of workers who find themselves unable to quickly and effectively solve problems. TiER1 Performance Solutions and the Gronstedt Group propose a solution that will put the power of augmented reality (AR) and the knowledge of experienced utility personnel into the ...

    SBIR Phase I 2018 Department of Energy
  9. Novel CO2 Sorbent Materials for Advanced Carbon Capture Technologies

    SBC: Advanced Energy Materials, LLC            Topic: 18d

    This project proposes the development of carbon capture technology for flue gases using a new class of solid adsorbents. The novel adsorbents proposed here are anticipated of having a high CO2 removal capacity (0.4 g g-1) at wide temperature range and fast regeneration process. In this project, Advanced Energy Materials, LLC (AdEM) proposes to develop the high performance CO2 adsorbents based on l ...

    SBIR Phase I 2018 Department of Energy
  10. Smart Meter Based Peer to Peer Transactions for Solar Energy Prosumers

    SBC: Blake-Philips, LLC            Topic: 12c

    Consumers want more choice in their ability to buy energy which has been produced by alternative sources such as solar power without the interaction of a third party. Meanwhile, the utilities which maintain the grid must know how much power is within their system. A network where energy transactions can be distributed anonymously and reconciled by any member of the network is desired. A smart-mete ...

    SBIR Phase I 2018 Department of Energy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government