You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Cryogenic Grinding System for the High Productivity Grinding of Advanced Materials

    SBC: CREARE LLC            Topic: DLA09001

    High performance metals, ceramics, and hard coatings are used in military applications to enhance the performance of key systems needed by the warfighter. One of the most prevalent operations to remove material, achieve the desired surface finish, or enhance part quality is bulk and finish grinding. For typical cutting speeds, conventional synthetic or oil-based coolants are sufficient to remove ...

    SBIR Phase I 2010 Department of DefenseDefense Logistics Agency
  2. Rapid, Non-Thermally Cured Composite Fabrication

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: DLA09001

    Composite materials, with their high strength to weight ratios, manipulative properties, and corrosion resistance are now widely utilized throughout the military. High performance composites are required for air, sea, and land platforms. One of the drawbacks of these composite systems is the excessive costs and time required for part manufacturing. Prolonged elevated temperature curing is typic ...

    SBIR Phase I 2010 Department of DefenseDefense Logistics Agency
  3. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: IMAGINESTICS, LLC            Topic: DLA07001

    DoD agencies are facing growing challenge of maintaining aging Warfighter Systems, while reducing procurement costs of discrete-parts. One key hindrance to ensuring readiness is discrete part procurement. When procuring parts, tech data package which is provided to the suppliers during pre and post-award contains raster drawings which are often of very poor quality. Several suppliers do not provid ...

    SBIR Phase II 2010 Department of DefenseDefense Logistics Agency
  4. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: MATERIALS INNOVATION TECHNOLOGIES, LLC            Topic: DLA09001

    Since 2005, MIT-LLC has successfully developed the three dimensional engineered preform (3-DEP) process for making near-net-shape, complex geometry, chopped fiber preforms that are subsequently infused with epoxy or other thermosetting resin. We have been approached frequently to determine if we could develop a high performance thermoplastic composite process. The drivers for these inquiries are ...

    SBIR Phase I 2010 Department of DefenseDefense Logistics Agency
  5. Premature Cure Indication for QwikSeal® Pre-Sealed Fastener Technology; Topic #DLA08-01

    SBC: Systems & Materials Research Corporation            Topic: DLA08001

    Systems and Materials Research Corporation (SMRC) has developed a proprietary process called QwikSeal for pre-coating fasteners with cure-blocked sealant, then overcoating the pre-applied sealant with a moisture-impermeable size coat. QwikSeal is designed to replace the current “wet installation” process where sealant is mixed and applied to each fastener at the point of installation, and whic ...

    SBIR Phase II 2010 Department of DefenseDefense Logistics Agency
  6. STRETCH ROLL FORMING

    SBC: FAIRMOUNT TECHNOLOGIES LLC            Topic: DLA09001

    Manufacture and maintenance of aircraft, ships, light rail cars, etc., requires many structural components formed out of extrusions. Processes such as stretch forming are typically used to produce these parts, in which unique dies are required for each forming operation. This increases the cost and lead time of production. The need for dies prevents the production of spares at the maintenance s ...

    SBIR Phase I 2010 Department of DefenseDefense Logistics Agency
  7. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: Softwear Automation, Inc.            Topic: DLA09001

    A completely automatic, cost-effective, production of garments and other sewn items can be achieved. A novel approach that depends heavily on computing, high performance servo systems, and machine vision has been demonstrated. This proposal will lead to a the most critical element of such automation, a completely automatic sewing machine that will sew arbitrary but controlled paths in the two ...

    SBIR Phase I 2010 Department of DefenseDefense Logistics Agency
  8. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: Benz Oil Company            Topic: DLA09001

    The majority of manufactured parts for defense system applications are machined using a lubricating cutting fluid. Field data has shown that cutting fluids not only impact tool life and piece geometry of manufactured parts, but can alter the power used by machine tools by 15% to 30%. Cutting fluid chemistry can be optimized by careful study

    SBIR Phase I 2010 Department of DefenseDefense Logistics Agency
  9. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: 4D VALUE ADDED SOLUTIONS TEAM            Topic: DLA07001

    Through efforts on an NSF-funded project, MSOE has demonstrated the ability to produce castings at a resolution and complexity finer than known metal casting processes. The project, “Design and Fabrication of Components with Optimized Lattice Microstructures,” began in 2002 with initial efforts focused upon what casting processes were available and what would be required to produce complex la ...

    SBIR Phase I 2007 Department of DefenseDefense Logistics Agency
  10. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: ADVANCED POWDER SOLUTIONS INC            Topic: DLA08001

    Understanding that saving weight without sacrificing performance on a vehicle is important, the objective of this program is to continue to demonstrate advanced lightweight materials that can have multi-functional capability and be discretely made into parts for DLA. Many applications will have specific requirements of high thermal conductivity, low thermal conductivity, radiation resistance, Mod ...

    SBIR Phase I 2009 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government