List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. STTR Phase II: Micromachined components for wireless applications

    SBC: LASERLITH CORP.            Topic: ES

    The broader impact/commercialization potential of this project include tunable blocks that would allow a range of spectrally- and spatially-agile devices. These may include high-gain directional antennas that can improve performance while reducing power consumption. The fundamental MEMS varactor technology also offers solutions for critical efficiency and linearity problems as wireless devices emp ...

    STTR Phase II 2014 National Science Foundation
  2. SBIR Phase II: Innovative Electroencephalography to Advance the Research and Diagnosis of Brain Disorders

    SBC: CREmedical Corp            Topic: BC

    The broader impact/commercial potential of this Small Business Innovation Research (SBIR) Phase II project is multi-fold: First, the proposed tripolar concentric ring electrode and instrumentation for acquiring brain signals, tripolar electroencephalography (tEEG), is a platform technology that has a variety of medical and commercial applications. By providing significantly clearer brain signals, ...

    SBIR Phase II 2014 National Science Foundation
  3. Development of Safe, Reliable, and Durable Lithium-ion Battery for Naval Aircraft Applications

    SBC: Yardney Technical Products, Inc.            Topic: N14AT006

    Yardney will design and develop a lightweight, safe, reliable, and cost-effective aircraft battery with improved thermal design and the use of active cooling techniques. As a novel part of the battery design, Yardney will investigate and implement high performance electrodes using three dimensional (3D) micro-porous current collectors, safer thin metal case cell design, a micro-channel heat pipe t ...

    STTR Phase I 2014 Department of DefenseNavy
  4. Innovative Designs for Reliable Electro-Explosive Ordnance Devices

    SBC: SYSTEMS ENGINEERING ASSOCIATES CORPORATION            Topic: MDA12031

    Missiles, use electro-explosive devices (EEDs) to perform mulitple functions during operation. This effort seeks ways to improve on the EED"s reliability and lower the failure or inadvertent activation rate of these devices. During Phase I, SEA CORP investigated replacing EEDs with commercial off the shelf (COTS) automotive airbag inflators to perform the required pneumatic functions of variou ...

    SBIR Phase II 2014 Department of DefenseMissile Defense Agency
  5. STTR Phase I: Novel Multifunctional, Bio-Based Coupling Agents for Wood Plastic Composites

    SBC: RENUVIX LLC            Topic: CT

    The broader impact/commercial potential of this project involves a significant enhancement in the properties of wood polymer composites (WPCs) by the commercialization of a highly effective bio-based coupling agent made from renewable sources such as plant oils instead of petroleum. By significantly enhancing the properties of WPCs, substantial benefit to society will result by providing new appli ...

    STTR Phase I 2014 National Science Foundation
  6. Integration of Complex Geometry, 3D Woven Preforms via Innovative Stitching Technique

    SBC: T.E.A.M., INC.            Topic: H701

    Thick, 3D woven carbon/phenolic composites offer potential improvement over legacy thermal protection systems (TPS) for re-entry vehicle heat shield applications. However due to the scale and complexity of typical re-entry vehicle structures, it is likely that multiple 3D woven panels would need to laid up to create the overall heat shield, creating a potential weak spots at the panel joints. ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  7. Advancing High Energy Lithium-Sulfur Batteries

    SBC: Yardney Technical Products, Inc.            Topic: Z102

    Lithium-Ion batteries have been a main source of energy for many aerospace applications over the past decade. Future space missions are facing a number of challenging requirements, including significant increase in specific energy, approaching 500 Wh/kg, and energy density of 700 Wh/l at cell level. Compared to state-of-the-art technology today, a reduction in mass and volume are necessary, along ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  8. Low-Cost, High Efficiency Integration of Solid-State Lighting and Building Controls Using a Packet Energy Transfer (PET) Power Distribution System

    SBC: VoltServer            Topic: 03a

    Solid state lighting has not yet taken off in commercial buildings due to its high relative installed cost. On a normalized basis, solid state lighting replacement lamps are on the order of two times more expensive than equivalent compact fluorescent lamps (CFLs), and five times more expensive than an equivalent downlight fixture. An additional barrier relates to the performance and cost of the dr ...

    SBIR Phase I 2014 Department of Energy
  9. Innovative Acoustic Velocity Sensors

    SBC: Btech Acoustics, LLC            Topic: N141026

    BTech proposes the design and development of low-profile, innovative acoustic velocity sensors for measuring acoustic motion of sound waves in marine applications. Methods include increasing voltage sensitivity by novel connections, considerations of co-located preamplifiers, multiple plates, improved materials and more. An improved acoustic motion accelerometer sensor for hull arrays is proposed ...

    SBIR Phase I 2014 Department of Defense
  10. Printed Low Voltage Munition Ignition Bridge

    SBC: Blue Sky Engineering, Inc.            Topic: A14059

    Advances in printing technologies may enable low-cost and flexible fabrication options for ignition bridges. The inherent nature of these direct write systems enables quick-turn prototyping for laboratory-scale development, while their high throughput allows low-cost production. The Blue Sky Engineering team proposes to develop printed explosive bridges based on its expertise in microdetonators ...

    SBIR Phase I 2014 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government