List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Global (N4) Free Space Optical Interconnection Packaging Technology

    SBC: OPTICOMP CORP.            Topic: N/A

    The proposal program will demonstrate packaging technology in an optical interconnect device consisting of at least 64 parallel interconnections between stages. The packaging will allow a 1 GHz bandwidth, micro-optoelectronic switch to survive in a 50 g (gravity) shock and vibration environment. OptiComp's enabling GaAs "Smart" optoelectronic interconnect modules will be used in the proposed opt ...

    SBIR Phase II 1996 Department of DefenseNavy
  2. Advanced Military Diesel Engine Tribology

    SBC: SURFACES RESEARCH & APPLICATIONS, INCO            Topic: N/A

    Improvements in liquid lubricant performacne and life are required for the AIPS advanced military diesel engine. At the 340 degree F oil sump temperature of this engine, the antiwear/anti-oxidant additives in most AIPS candidate lubricants are rapidly decomposed. Several additive functions are thus lost. This can result in severe bearing wear and corrosion, high overhead wear, rapid loss of base n ...

    SBIR Phase II 1996 Department of DefenseArmy
  3. Quasi-Constant Speed Fixed-Pitch Composite Propellers

    SBC: Global Aircraft Corp.            Topic: N/A

    N/A

    SBIR Phase II 1996 National Aeronautics and Space Administration
  4. COMPOSITE MATERIAL DESIGNS FOR ASROC LAUNCHER MK112

    SBC: Abaris            Topic: N/A

    ADVANCED COMPOSITES HAVE POTENTIAL FOR EFFECTING WEIGHT SAVINGS AND PROVIDING CORROSION RESISTANCE TO A VARIETY OF MILTARY APPLICATIONS. THE MK112 ASROC LAUCHER MODS 1-8 AND GUIDE, ES114, HAVE BEEN IDENTIFIED AS HAVING EXPERINECED CORROSION AND WEIGHT PROBLEMS. THERE ARE A VARIETY OF RESINS AND FIBERS AVAILABLE FOR USE AS STRUCTURAL MATERIALS THESE INCLUDE GLASS, KEVLAR & CARBON FIBERS,AND POLYEST ...

    SBIR Phase II 1985 Department of DefenseNavy
  5. THE DESIGN OF AN INDEPENDENT,OPERATIONAL, DECISION MAKING CONTROL UNIT FOR AUTOMATIC RECOGNITION

    SBC: Computer & Information            Topic: N/A

    IT IS PROPOSED TO INVESTIGATE, BY A SERIES OF EXPERIMENTS THE DESIGN OF A STORAGE AND CONTROL MECHANISM CALLED A RULING. IS A MATHEMATICAL CONCEPT WHICH LENDS ITSELD TO IMPLEMENTATION ON A CONVENTIONAL COMPUTER. IT IS AN ENVIRONMENT WHICH PERMITS LEARNING IN A REAL-TIME, UNKNOWN ENVIRONMENT, WITH CONTROL BASED ON PAST AND PRESENT LEARNED EXPERIENCE. IN A TYPICAL ENVIRONMENT, A RULING CNSUMING 10 T ...

    SBIR Phase II 1985 Department of DefenseArmy
  6. "CULTURING AMPHIBIANS FOR BIOMEDICAL RESEARCH"

    SBC: Central Valley Biological Inc            Topic: N/A

    LARGE NUMBERS OF RESEARCH QUALITY AMPHIBIANS ARE NEEDED ANNUALLY FOR BIOMEDICAL RESEARCH. CURRENTLY, THERE ARE SEASONAL SHORTAGES AND INCONSISTENT SUPPLY OF THE BULLFROG, RANA CATESBIANA AND AXOLOTL, AMBYSTOMA MEXICANUM. THROUGH TEMPERATURE MANIPULATION AND HORMONAL INJECTION IT WILL BE SHOWN THAT THESE AMPHIBIANS CAN NOT ONLY BE CULTURED AND CONDITIONED IN CAPTIVITY TO THE EXTEND NEEDED, BUT THAT ...

    SBIR Phase II 1985 Department of Health and Human Services
  7. In-Situ Electronic Sensors to Determine Analytes in Cold-Region Soils

    SBC: Phionics, Inc.            Topic: N/A

    The primary problem to be addressed by this SBIR request is the need for development of specific ion sensors that can work reliably in sub-freezing environments to allow unmanned dataloggers to accumulate data on a down-loaded or real-time basis. This would involve re-designing the reference side of the electrode (half-cell) to be rugged enough to survive the conditions imposed upon it while also ...

    SBIR Phase II 1996 Department of DefenseArmy
  8. IDENTIFY/ANALYZE THC AND COCAINE METABOLITES IN MECONIUM

    SBC: ElSohly Laboratories, Incorporated            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Health and Human Services
  9. New Composite Manufactuing Processes for Special Operation Forces Maritime Craft Hulls

    SBC: SEEMANN COMPOSITES, INC.            Topic: N/A

    Seemann Composites, Inc. (SCI), as the prime contractor, Materials Science Corporation (MSC) and McDonnell Douglas Phantom Works as subcontractors, propose to develop an advanced composite structure which will be significantly lighter, tougher and more reliable than previous hull structures and which can be built at a lower cost than conventional construction. Furthermore, problems with quality ...

    SBIR Phase I 1996 Department of DefenseSpecial Operations Command
  10. COMMUNITY BUILDING STRATEGIES FOR INCLUSIVE CLASSROOMS

    SBC: EDGE ENTERPRISES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Health and Human Services

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government