You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Innovative manufacturing research on forming of large light armor alloy sections resistant to blast and penetration

    SBC: CORVID TECHNOLOGIES, LLC            Topic: A09051

    Weldments that join plates of aluminum or steel combat vehicle hulls can be the lowest strength area of the structure and thus provide a decreased level of ballistic protection. To avoid welds, seamless hulls could be formed from thick plate if a suitable manufacturing process is developed. Corvid Technologies, teamed with Concurrent Technologies Corporation (CTC) performed a series of modeling, s ...

    SBIR Phase II 2011 Department of DefenseArmy
  2. Fabric with Variable Air Permeability for Use in Parachutes

    SBC: Wizbe Industries, Inc.            Topic: A10163

    Identification and Significance of the Problem or Opportunity. Current Military parachute canopies are constructed from cloth that has a fixed air permeability. The level of air permeability in a fabric significantly affects the opening speed of the parachute, filling time, opening shock and rate of descent. The air permeability of the fabric remains cannot be altered once the canopy is construc ...

    SBIR Phase I 2011 Department of DefenseArmy
  3. Prognostic Wear Prediction Tool for BlackHawk Hanger Bearings

    SBC: SENTIENT SCIENCE CORPORATION            Topic: A04077

    During Phase I, the Blackhawk hanger bearing and oil cooler fan bearing applications were studied in detail, including analysis of vibration and temperature data from used oil cooler bench tests (conducted by Sikorsky) and used hanger bearing bench tests (conducted by Sentient). This data, along with an analysis of operational and environmental conditions, has allowed us to identify the probable r ...

    SBIR Phase II 2005 Department of DefenseArmy
  4. Multi-Resolution Representations and Simulation of Large Terrain Models

    SBC: COLLIDE, INC.            Topic: A03207

    We propose to develop multiresolution representations and algorithms for synthetic terrain environments. They will be used for representing large terrain models as well dynamic and atmospheric simulations. Our ultimate goal is to increase the validity of the simulation by incorporating the multiple models at varying resolutions. We will use the OneSAF simulation Product Line Architecture Framework ...

    SBIR Phase II 2005 Department of DefenseArmy
  5. Analysis Tools for Detection and Diagnosis of Biological Threats

    SBC: ALPHA-GAMMA TECHNOLOGIES, INC.            Topic: CBD04113

    DNA microarray technology, in combination with statistical and predictive modeling tools, could be used to evaluate thousands of genes against distinct gene expression patterns induced by chemical/biological agents to provide early identification and speed therapeutic intervention. The overall objective of this Phase II effort is to leverage existing public domain resources and commercial tools t ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  6. Hermetic Textile Closure Hardware System

    SBC: SIGMA K CORP            Topic: CBD04110

    Effective collective protection fabrics must have a reliable closure system. During our Phase I Work Plan, Sigma-K began developing a Hermetic Textile Closure Hardware (HATCH) system. The HATCH combines both a magnetic and geometric self locking mechanism that will provide a hermetic seal when closed. Our current Phase I successes include developing self closing samples that can provide a hermetic ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  7. Advanced Biomechanical and Physiological Monitoring System for Amputees and Rehabilitating Personnel

    SBC: TENXSYS, INC.            Topic: OSD05H11

    This SBIR Phase I project will develop a health and motion monitoring sensor and analysis system to support the return of military personnel with prosthetic devices to active duty. DoD is allowing increasing numbers of Soldiers with prosthetics to return to active duty if they are performance capable, minimizing the loss of their valuable core expertise to the services. There are significant cha ...

    SBIR Phase I 2005 Department of DefenseArmy
  8. Insensitive Munitions Modeling and Simulation

    SBC: CORVID TECHNOLOGIES, LLC            Topic: A05201

    Insensitive munitions (IM) design and testing for propulsion systems is hindered both by high test costs and the complexity of propellant responses to IM stimuli. Modeling and simulation tools for predictions of IM hazards are under development that characterize many of the pertinent phenomena, including damage sensitization to reaction and delayed-onset detonation. Such tools can provide many b ...

    SBIR Phase I 2005 Department of DefenseArmy
  9. Diagnostic / Prognostic System for Tactical Power Sources

    SBC: NOREGON SYSTEMS, INC.            Topic: A05077

    Maintenance on Army Tactical Power Systems (TPS's) is currently performed at regular intervals regardless of actual usage or operating conditions - wasting resources servicing systems that do not need maintenance, and missing opportunities to prevent catastrophic failures. The Army seeks to 1) improve maintenance efficiency and effectiveness by servicing systems based on actual usage and 2) imple ...

    SBIR Phase I 2005 Department of DefenseArmy
  10. Hybrid Textile-Based Multi-Layered Flexible System for Penetration Resistance

    SBC: Tex Tech Industries Inc.            Topic: A05T004

    Tex Tech Industries has an effective through thickness reinforced hybrid ballistic fabric that has recently been introduced into the ballistic armor market for police force body armor. Fabric made with this technology was tested for V-50 results using both 9mm projectiles (124g Full Metal jacket) and .22 caliber fragment simulation projectiles( FSP, 17 grain). Result from this testing demonstrate ...

    STTR Phase I 2005 Department of DefenseArmy
US Flag An Official Website of the United States Government