You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Biomechanical and Physiological Monitoring System for Amputees and Rehabilitating Personnel

    SBC: TENXSYS, INC.            Topic: OSD05H11

    This SBIR Phase I project will develop a health and motion monitoring sensor and analysis system to support the return of military personnel with prosthetic devices to active duty. DoD is allowing increasing numbers of Soldiers with prosthetics to return to active duty if they are performance capable, minimizing the loss of their valuable core expertise to the services. There are significant cha ...

    SBIR Phase I 2005 Department of DefenseArmy
  2. Mechanisms for Hands-Free Point of Care Data Entry in Combat Environments

    SBC: LI CREATIVE TECHNOLOGIES INC            Topic: OSD05H10

    A novel and promising solution for hands - and eyes-free voice interface for point-of-care data entry is proposed. The solution consists of the following major modules: a recently-developed noise-reduction microphone, a Bluetooth earphone, an automatic speech recognizer, a text-to-speech synthesizer, and a dialogue manager. To make the developed system useful in combat environments, we emphasize o ...

    SBIR Phase I 2005 Department of DefenseArmy
  3. A novel approach to fabrication of polymer-based ballistic resistant materials with low areal density

    SBC: NEI CORPORATION            Topic: OSD05H02

    Currently, adequate ballistic protection in optically transparent surface shields and transparent armor is provided either by thick sections of polymers, or by laminated sheets of polymer and glass. In both cases, the areal density is very high. For reasons explained in the proposal, efforts to date on the synthesis of transparent polymer nanocomposite materials, especially those based on polycarb ...

    SBIR Phase I 2005 Department of DefenseArmy
  4. Insensitive Munitions Modeling and Simulation

    SBC: CORVID TECHNOLOGIES, LLC            Topic: A05201

    Insensitive munitions (IM) design and testing for propulsion systems is hindered both by high test costs and the complexity of propellant responses to IM stimuli. Modeling and simulation tools for predictions of IM hazards are under development that characterize many of the pertinent phenomena, including damage sensitization to reaction and delayed-onset detonation. Such tools can provide many b ...

    SBIR Phase I 2005 Department of DefenseArmy
  5. Mobile IPv6 in a Low Bandwidth Tactical Environment.

    SBC: DATATEK APPLICATIONS, INC.            Topic: A05111

    The purpose of this proposal is to demonstrate the feasiblity of innovative extentions to the use of Mobile IPv6 to allow US Army legacy tactical devices to interoperate in the new IPv6 mobile networks being deployed. The Army is planning the migration of its core network to Internet Protocol version 6 (IPv6) over the next several years as part of its Global Information Grid (GIG) expansion. The ...

    SBIR Phase I 2005 Department of DefenseArmy
  6. Smart Self-Configuring Miniature Windscreen

    SBC: LI CREATIVE TECHNOLOGIES INC            Topic: A05007

    A novel and promising solution is proposed for a smart self-configuring miniature windscreen. The proposed solution includes a mechanical windscreen, MEMS microphones, and a DSP windscreen. The mechanical windscreen will be designed by numerical simulation. The finite-element method will be utilized to simulate the effect of different shapes of windscreens on the aerodynamics in the vicinity of th ...

    SBIR Phase I 2005 Department of DefenseArmy
  7. Innovative Lightweight Small-Arm Polymer Cased Ammunition

    SBC: Frontier Performance Polymers Corporation            Topic: A05011

    To ensure that America's soldiers maintain their overwhelming combat edge into 21st century, use of lightweight polymers as the cartridge case material can alleviate a significant portion of this weight burden for soldiers. The objectives of this proposal is to demonstrate Frontier's innovative design and material technologies to produce high performance, lightweight small arm polymer cased ammun ...

    SBIR Phase I 2005 Department of DefenseArmy
  8. Reliable, High Temperature Silicon Carbide MOSFET

    SBC: United Silicon Carbide, Inc.            Topic: A05236

    In response to SBIR topic A05-236, a proposal based on a novel concept in MOSFET design and fabrication is proposed to address the problems of (i) low channel mobility, (iii) low and unstable threshold voltage, and (iii) low gate oxide reliability under both high electric field and high temperature. Phase I will be focused on feasibility demonstration. A physics-based device model will be develope ...

    SBIR Phase I 2005 Department of DefenseArmy
  9. Diagnostic / Prognostic System for Tactical Power Sources

    SBC: NOREGON SYSTEMS, INC.            Topic: A05077

    Maintenance on Army Tactical Power Systems (TPS's) is currently performed at regular intervals regardless of actual usage or operating conditions - wasting resources servicing systems that do not need maintenance, and missing opportunities to prevent catastrophic failures. The Army seeks to 1) improve maintenance efficiency and effectiveness by servicing systems based on actual usage and 2) imple ...

    SBIR Phase I 2005 Department of DefenseArmy
  10. Sensor / Network Electronic Attack Kit (S/NEAK)

    SBC: OpCoast LLC            Topic: A05085

    The proposed effort will focus on the disruption of networks versus particular communications links using powerful optimization and co-design approaches. A technique for assigning target value metrics will be developed an applied to `best effort' extractions of adversary network topologies proposed in this work. Adversary network usage denial is conducted in conjunction with goals that reflect min ...

    SBIR Phase I 2005 Department of DefenseArmy
US Flag An Official Website of the United States Government