Award Data

The objective of this project is to develop a test-validated CAD tool for performing virtual laser shock peening(LSP) simulations of rotorcraft components. Virtual LSP peening can be used, in conjunction with virtual fatigue testing, to conduct simulations to assess the effects of variations in process parameters, i.e., laser beam power density and size, number of layers, and the overlay pattern ...

This SBIR Phase I project will develop a health and motion monitoring sensor and analysis system to support the return of military personnel with prosthetic devices to active duty. DoD is allowing increasing numbers of Soldiers with prosthetics to return to active duty if they are performance capable, minimizing the loss of their valuable core expertise to the services. There are significant cha ...

N/A

UAV operations in known icing conditions present a problem whose solution critically depends upon their flight testing in artificial icing environments. Unfortunately, instrumentation, control, and operational procedures have yet to be developed to support this testing behind manned aircraft, such as the U.S. Army CH-47 Helicopter Icing Spray System (HISS), that may produce the artificial icing c ...

Currently, adequate ballistic protection in optically transparent surface shields and transparent armor is provided either by thick sections of polymers, or by laminated sheets of polymer and glass. In both cases, the areal density is very high. For reasons explained in the proposal, efforts to date on the synthesis of transparent polymer nanocomposite materials, especially those based on polycarb ...

JAMMER POWER MANAGEMENT REQUIRES SIGNIFICANT EXPERTISE COVERING THE RECOGNITION OF OPPORTUNITIES, AND KNOWLEDGE OF EW SYSTEM CAPABILITIES SYSTEMS TO TAKE ADVANTAGE OF THOSE OPPORTUNITIES. THERE IS DOUBT THAT MANY OF THE FUNCTIONS OF JAMMER POWER MANAGEMENT CAN BE AUTOMATED. FOR EXAMPLE, ELECTROMAGNETIC PATTERN OPTIMIZATION IN THE SPACE, TIME, AND FREQUENCY DOMAINS, PARTICULARLY THE SELECTION OF FR ...

The Centers for Disease Control recently stated that continued vigilance is critical to protect the blood supply from known pathogens and to detect the emergence of new infectious agents. The Food and Drug Administration has also recently issued guidance on prudent steps to safeguard the U.S. blood supply from SARS. This proposal identifies the Research & System Design tasks resulting in the pro ...

Sensors Unlimited will design, develop, and deliver a 1920x1080 element InGaAs focal plane array based camera for use in BOTH the Visible and Shortwave Infrared (SWIR) wavelength bands. Using Sensors Unlimited's proven InP substrate removal process, the short wavelength response of an InGaAs focal plane array is extended, such that the wavelength response spans from the visible (400 nm and 20% qu ...

It is proposed to formulate an equation(s) to describe the (A) evaporation and (B) death rates of aerosolized bacteria in their spent culture fluid droplets. This formulation will account for effects of atmospheric temperature, relative humidity, solar radiation, droplet solute concentration, and droplet size effects perhaps including effects of solute-particle (i.e,, bacteria) concentration and p ...

PERFECT VIEW INC. AND THE PRINCIPAL INVESTIGATOR, DR. A. J. ATTAR, HAVE RECENTLY OBTAINED A PATENT ON A METHOD TO REMOVE MINERAL WATER FROM COAL BY FIRST TURNING ITS SURFACE HYDROPHOBIC (U.S. PATENT 4,597,769, ISSUED JULY 1ST, 1986). THE TREATMENT INVOLVES A VERY LOW-COST CHEMICAL REACTION WHICH CONVERTS THE HYDROXLIC AND CARBOXYLIC SURFACE FUNCTIONALITIES TO ETHERS AND ESTERS. THIS TREATMENT REDU ...