List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

Displaying 1 - 10 of 24569 results
  1. Air Launch Testbed for Endoatmospheric Hypersonic Trajectories

    SBC: Generation Orbit Launch Services, Inc.            Topic: AF141081

    ABSTRACT:This SBIR proposal covers the preliminary design and initial hardware and software in-the-loop testing of the GOLauncher 1, a single stage liquid air launched rocket system, for utilization in future hypersonic flight testing efforts. Major objectives include completing prelimianry design of the system based on requirements defined during Phase I, further validation of cost and schedule e ...

    SBIR Phase II 2017 Department of DefenseAir Force
  2. Radiation Hardened By Design Structured ASICs for Reliable Digital Components

    SBC: Microelectronics Research Development Corporation            Topic: MDA05029

    The Phase II effort will fully develop and realize a cost-effective, practically-oriented means to design and deliver radiation hardened digital electronic components capable of reliable operation in MDA and other DoD space and interceptor environments. Micro-RDC will accomplish this by working closely with ViASIC to integrate both new and existing radiation design hardening techniques into their ...

    SBIR Phase II 2007 Department of DefenseAir Force
  3. Miniature Unmanned Aerial Vehicle (MUAV)

    SBC: AEROVIRONMENT, INC.            Topic: SOCOM05011

    The Air Force has a need to deliver a payload to a specifically identified target location within prescribed accuracy limits. The delivery system must be small, light-weight, and capable of operating effectively at significantly greater distances than existing man-portable systems. AeroVironment Inc. (AVI) will design, build, test and deliver air vehicles, launchers and ground control units und ...

    SBIR Phase II 2007 Department of DefenseAir Force
  4. Thermal Spray Dashboard/Knowledge Management System

    SBC: Engineering And Software System Solutions, Inc.            Topic: AF151166

    The USAF repair depots expend tremendous amounts of resources applying high technology thermal spray coatings to improve the performance of components and systems. In general, thermal spray application processes are complex, require high cost equipment th

    SBIR Phase II 2017 Department of DefenseAir Force
  5. Arc jet Test-Article Surface Recession Rate Monitor

    SBC: Innovative Scientific Solutions, Inc.            Topic: AF141228

    ABSTRACT:Quantitative ablation recession rate measurements of heat shield surfaces are essential for evaluating the performance of heat shield materials. Currently, these measurements are limited to two-dimensional images that focus on the nose tip regression rate. For wedge testing, recession rate is determined by comparing pre- and post-test measurements, and therefore, recession rate as a funct ...

    SBIR Phase II 2016 Department of DefenseAir Force
  6. Rule-Based XML Validation for T&E (RuBX)

    SBC: KNOWLEDGE BASED SYSTEMS, INC.            Topic: AF141227

    The VIVALDI method and toolkit enables test and instrumentation engineers and T&E stakeholders to define rules and support the verification, validation, de-confliction and optimization (VVDO) of metadata and systems design relating to multi-vendor test and instrumentation systems. This capability includes the following innovations: a catalog of rules for supporting T&E VVDO that can be used in mul ...

    SBIR Phase II 2016 Department of DefenseAir Force
  7. Radiation Hardened By Design Structured ASICs for Reliable Digital Components

    SBC: Microelectronics Research Development Corporation            Topic: N/A

    The Phase II effort will fully develop and realize a cost-effective, practically-oriented means to design and deliver radiation hardened digital electronic components capable of reliable operation in MDA and other DoD space and interceptor environments. Micro-RDC will accomplish this by working closely with ViASIC to integrate both new and existing radiation design hardening techniques into their ...

    SBIR Phase II 2007 Department of DefenseAir Force
  8. Prototype Development for 8,000 Samples per Second 3D SADAR and Rapidly Deployable Sensor Hardware

    SBC: QUANTUM TECHNOLOGY SCIENCES, INC.            Topic: A09099

    Quantum has two technical objectives for Phase II. The first is to develop, test, demonstrate, and deliver prototype three-dimensional (3D) array, Seismic Acoustic Detection and Ranging (SADAR) systems with a data sampling rate of 8,000 (8K) per second to automatically detect, classify, report, and localize underground sources for specific seismic-acoustic signals of interest in near real-time. Th ...

    SBIR Phase II 2016 Department of DefenseAir Force
  9. A Novel Coverglass System with Enhanced Radiation Resistance

    SBC: Infoscitex Corporation            Topic: AF04029

    The Foster-Miller team is developing a novel coverglass system that protects photovoltaic cells on space power systems that are exposed to high doses of ionizing radiation. The spectrum of radiation a solar cell is exposed to not only provides usable energy, over time it also reduces the efficiency of the cell by darkening the barrier coverglass, escalates the operating temperature, and deteriora ...

    SBIR Phase II 2005 Department of DefenseAir Force
  10. Optical Grade Sapphire Manufacturing Growth Process for IR Window Applications

    SBC: Rubicon Technology, Inc.            Topic: AF101C001

    ABSTRACT: Sapphire possesses a number of physical properties, including high strength, high melting point, chemical inertness, and excellent transparency in the visible and IR spectrum, which make it an attractive window material for military applications. For Phase I, Rubicon Technology demonstrated a sapphire crystal growth process to MRL 5 capable of growing slabs 20"x 14". During P ...

    SBIR Phase II 2012 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government