You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Cloud Particle Imager for Balloons and Remotely Piloted Aircraft

    SBC: STRATTON PARK ENGINEERING CO., INC.            Topic: N/A

    The Earth Observing System (EOS), a constellation of satellites that will observe clouds from space, needs reliable in situ measurements of cloud drops and ice particles for validation of remote retrieval algorithms. Current aircraft cloud particle measurements do not give good statistical data sets when compared to satellite overpasses. A new instrument, the cloud particle imager (CPI), previousl ...

    SBIR Phase I 2001 National Aeronautics and Space Administration
  2. A Cloud Particle Imager for Balloons and Remotely Piloted Aircraft

    SBC: STRATTON PARK ENGINEERING CO., INC.            Topic: N/A

    The Earth Observing System (EOS), a constellation of satellites that will observe clouds from space, needs reliable in situ measurements of cloud drops and ice particles for validation of remote retrieval algorithms. Current aircraft cloud particle measurements do not give good statistical data sets when compared to satellite overpasses. A new instrument, the cloud particle imager (CPI), previousl ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
  3. A COMPREHENSIVE ANALYSIS TOOL FOR DUCTED PROPELLERS

    SBC: Sukra Helitek Inc.            Topic: N/A

    The use of ducted propellers as the quiet propulsive device for UnmannedAerial Vehicles (UAV) is steadily gaining popularity. Their successful application as the fenestron tail rotor is global and well established.This research proposes a comprehensive analysis tool for ducted propellers.In Phase I, an axially symmetric Navier-Stokes flow solver capable of analyzing the ducted fan in climb, hover ...

    SBIR Phase I 2001 National Aeronautics and Space Administration
  4. A Constant Force Resistive Exercise Unit

    SBC: Valeo, Inc.            Topic: N/A

    In space, muscles atrophy and bones weaken due to long-term disuse in response to the lack of a gravity resistance vector against which to eccentrically and concentrically do work. To counteract the negative effects of microgravity on muscles and bones, research suggests that astronauts perform muscle-strengthening resistive exercises while in space. Since the lack of gravity renders weight-bearin ...

    SBIR Phase I 2001 National Aeronautics and Space Administration
  5. Adaptable and Reconfigurable Modular Systems (GSFC)- Plug and Play, Distributed Avionics

    SBC: MICROSAT SYSTEMS            Topic: N/A

    In order to execute the President's Vision for Space Exploration, NASA must find ways to reduce spacecraft cost, complexity, and integration and test time while increasing mission. Modular, reconfigurable satellite technologies are being developed at Goddard Space Flight Center for increasingly ambitious missions involving humans and robots. Development is on-going at both GSFC and the Air Force R ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  6. Adaptive Computed Tomography Imaging Spectrometer

    SBC: BOULDER NONLINEAR SYSTEMS, INC.            Topic: S201

    The present proposal describes the development of an adaptive Computed Tomography Imaging Spectrometer (CTIS), or "Snapshot" spectrometer which can "instantaneously" capture a full 3D data cube. The technology is applicable to hyperspectral imaging for remote sensing of extra-terrestrial planetary bodies and deep space objects. The snapshot capability of the technology makes it possible to captur ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  7. Additives to Increase Fuel Heat Sink Capacity

    SBC: TDA RESEARCH, INC.            Topic: N/A

    Recently, NASA has increased its emphasis on reducing the cost of reaching low Earth orbit. The goal is to reduce the cost from the current $10,000 per pound of payload to $100 per pound. Studies indicate that a key technology requirement is a single stage to orbit (SSTO) using rocket based combined cycle (RBCC) engine. In the third stage of a RBCC launch, an air breathing vehicle will travel at s ...

    SBIR Phase I 2001 National Aeronautics and Space Administration
  8. Advanced Pumps and Cold Plates for Two-Phase Cooling Loops

    SBC: Mesoscopic Devices LLC            Topic: E107

    Advanced instruments used for earth science missions require improved cooling systems to remove heat from high power electronic components and maintain tight temperature control for sensitive instruments. Mesoscopic Devices proposes to develop a pumped two-phase cooling loop that will provide high heat flux, distributed load cooling (> 100 W/cm^2) in a lightweight system. In Phase I, an extremely ...

    SBIR Phase II 2006 National Aeronautics and Space Administration
  9. Advanced Radiometer For Cloud Liquid Water and Aircraft Icing Detection

    SBC: Radiometrics Corporation            Topic: A102

    Aircraft icing continues to be one of the major safety and operational concerns of the FAA, elements of the military, and the foreign military and civilian counterparts. Attempts to develop methods to directly detect aircraft icing meteorological conditions have met with mixed success. Combining ground-based microwave radiometers with radars has shown great promise, but deficiencies of the radiome ...

    SBIR Phase II 2006 National Aeronautics and Space Administration
  10. AI Based Self-Correcting, Self-Reporting Edge Sensors

    SBC: Blue Line Engineering Co            Topic: N/A

    This Phase I SBIR project will establish the feasibility of a new class of super-enhanced edge sensors for segmented mirror telescopes. These sensors may be used to deploiy, align, and phase match the primary mirror segments of space based instruments such as NGST. They will be suitable for operational environments ranging from moderately hot (=373¿K) to cryogenic (well below 30 ¿K). Many innova ...

    SBIR Phase I 2001 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government