List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Integrated Molecular Assay System

    SBC: AnzenBio, LLC            Topic: HSB051001

    This Phase I proposal seeks to develop and demonstrate an improved first responder molecular analysis system based on a simplified methodology using aluminum oxide membrane (AOM) integrated sample preparation, amplification, and detection technology. This method has been shown to be faster, simpler, less expensive and more sensitive than existing methods. This proposal seeks to extend the applicab ...

    SBIR Phase I 2005 Department of Homeland Security
  2. Novel Gas Eductor-Mixer-Ejector for Recirculation of Pyrolysis Gases for Solid Waste Gasification

    SBC: EMERY ENERGY COMPANY, LLC            Topic: 04NCERB3

    A large variety of solid waste streams are available for conversion to useful energy, including municipal solid waste (MSW), woody byproducts, farm and agriculture byproducts, waste tires, and low-quality fuel sources. All such feedstocks can be converted to useful clean energy using gasification technology. Keeping these materials out of a landfill is both economically and environmentally sound, ...

    SBIR Phase I 2005 Environmental Protection Agency
  3. Identification and Sorting of Printed Wiring Boards (PWB) Within An E-Waste Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: 04NCERG1

    Electronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfills and leaching into the water supply. Because of these concerns, e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on manual hand sorting or differential density ...

    SBIR Phase I 2005 Environmental Protection Agency
  4. Data Analysis Algorithm Suitable for Structural Health Monitoring Based on Dust Network

    SBC: Brilliant Technology, Inc.            Topic: A104

    This proposed project will attempt to develop a data analysis system for structural health monitoring on space structures. The data analysis software will be a key component in space vehicle health management system and can be used to in vehicle life prediction. The sensor data analysis algorithm is aimed at providing a modeling and simulation tool for data collected from a network of distribute ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  5. Spectrometer for Particle Characterization With a New Multiple-Scattering Theory

    SBC: Felix ALBA Consultants, Inc.            Topic: S401

    There are two major commercial types of light-scattering particle size analyzers: Static Light Scattering and Dynamic Light Scattering. They are expensive, delicate, bulky, and must operate at extremely low particle concentrations. A fundamental mathematical model for high concentrations has been in need for decades and finally developed by the author after 25 years of research and development (ME ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  6. To Ensure the Integrity of the Cryogenic Propellant Depot Tank Within the Expected Radiation and Space Debris Environment

    SBC: Hypercomp Engineering, Inc            Topic: X204

    We intend to develop the technology for lightweight composite structure suitable for both cryogenic fuel depot storage as well as human in-space habitat. These will incorporate improved impact technologies for micro-meteor/space debris protection and radiation capable composite technologies. The application of filament wound composite pressure vessels to uses requiring pressurized storage at cr ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  7. The Cyogenic Evaluation of Irradiated Composite Materials for Use in Composite Pressure Vessels

    SBC: Hypercomp Engineering, Inc            Topic: T801

    The intent of this proposal is to develop key building block technology for lightweight composite structures suitable for cryogenic fuel depot storage as well as human in-space habitat. The effort will incorporate and expand on previous work by the participants in the cryogenic performance of composite materials as well as improved impact technologies for micro-meteor/space debris survivability ...

    STTR Phase I 2005 National Aeronautics and Space Administration
  8. Holographic Wavefront Correction for SHADOE LIDAR Receivers

    SBC: WASATCH PHOTONICS, INC.            Topic: E102

    Current shared aperture diffractive optical elements (SHADOE) have intrinsic residual wavefront errors on the order of 20 waves which limits the angular resolution of the LIDAR application to a range between 150 and 400 micro-radians. It is possible to reduce these aberrations by constructing a secondary holographic correction plate using the aberrated wave from the SHADOE as one of the two constr ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  9. SSVD Extreme Temperature Electronics for Planned Venus Missions

    SBC: INNOSYS, INC.            Topic: S402

    The purpose of this project is to demonstrate the feasibility of a new class of electronic devices called solid state vacuum devices (SSVDTMs), a highly enabling technology for extreme high temperature radiation hard electronics. SSVDTMs merge solid state semiconductor technology, including process fabrication techniques, with vacuum electronics, and, in this case, specifically thermionic vacuum ...

    SBIR Phase II 2005 National Aeronautics and Space Administration
  10. Lightweight Design of an HTS Coil for the VASIMR Experiment

    SBC: Tai-Yang Research Company            Topic: F701

    In this Phase II SBIR contract Tai-Yang Research Company of Tennessee proposes to design, fabricate, and test an ultra-lightweight High Temperature Superconducting (HTS) magnet utilizing Chemical Vapor Deposition (CVD) diamond technology. The proposed CVD/HTS magnet will combine ultra-lightweight and ultra-high reliability and thermal stability. When built, the CVD/HTS magnet will be the most tech ...

    SBIR Phase II 2005 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government