You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 1 - 10 of 4120 results
  1. Development of Cad Plating Replacement with Alkaline Zinc-Nickel Electroplating for Threaded Fasteners/Components

    SBC: ENGINEERING AND SOFTWARE SYSTEM SOLUTIONS, INC.            Topic: AF081101

    The DoD uses cadmium and chrome plating and removal processes on aircraft, engine, and landing gear components; however, these processes present significant health risks and cost. Cadmium, a carcinogen is targeted for removal from the workplace by the Environmental Protection Agency and is currently subject to regulation under the Clean Air Act, Clean Water Act and Resource Conservation and Recove ...

    SBIR Phase II 2019 Department of DefenseAir Force
  2. High-Energy Laser Coatings for Large, Lightweight, and Compliant Deployable Space Optics

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: AF03006

    The purpose of this Phase-II effort is to develop filtered cathodic arc plasma deposition (FCAPD) for applying multi-layer, highly reflective optical coatings to extremely light-weight and large membrane mirrors for space and high-altitude-based high-energy laser applications where glass mirrors are not practical. FCAPD coatings are ideal for this application because the deposition ions have highe ...

    SBIR Phase II 2004 Department of DefenseAir Force
  3. Pulsed FEEP Thruster With Adjustable ISP For Precision Propulsion

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: MDA04019

    AASC proposes to develop a pulsed field emisson electric propulsion system with adjustable specific impulse for microsatellites. A multiemitter liquid metal ion source array is paired with an innovative pulsing network that allows ion emission to be switched using pulses of a few hundred volts. A new automated system is proposed to ensure high effciency over a wide range of ISP. The phase I will d ...

    SBIR Phase I 2004 Department of DefenseMissile Defense Agency
  4. Magnetically Enhanced Vacuum Arc Thruster

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: S302

    Alameda Applied Sciences Corporation has demonstrated the feasibility of a new type of electric propulsion device dubbed the Magnetically Enhanced Vacuum Arc Thruster (MVAT). This thruster is itself a variant on the Vacuum Arc Thruster that has been demonstrated via a recently concluded Phase I SBIR contracts from NASA. The VAT was verified to be a throttleable low mass (ca. 150g) high efficiency ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  5. Advanced Neutron Source for Radiography & Tomography

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: A03015

    Alameda Applied Sciences Corporation proposes to design in Phase I a pulsed neutron source based on dense plasma focus (DPF) technology that is practical for thermal neutron radiography. A fully operational source will be fabricated in Phase II. The neutron production/pulse by available sources and the resultant thermal flux on target are estimated to be about five orders of magnitude below what i ...

    SBIR Phase I 2004 Department of DefenseArmy
  6. Pulsed Liquid Metal Ion Source for Heavy Ion Fusion

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: 3

    75488-Pulsed ion sources are used in a variety of applications from heavy ion fusion to space propulsion. In order to optimize the ion beams that are produced, it is necessary to have a very high degree of reproducibility from pulse to pulse. Liquid metal ion sources have been shown to provide beams with extremely low noise and no significant charge state variation; however, the useful emitter c ...

    STTR Phase I 2004 Department of Energy
  7. Service Life Extension of Machine Gun Barrels

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: SOCOM03009

    The purpose of this Phase-I is to demonstrate the feasibility of using Alameda Applied Sciences Corporation's Coaxial Energetic Deposition (CED) process to increase the life of gun barrels, specifically the Mk-46 and Mk-48 light-weight machine guns, by depositing a protective refractory metal coating to the inside of the barrel as a replacement for the chrome coatings that are presently used. The ...

    SBIR Phase I 2004 Department of DefenseSpecial Operations Command
  8. Coaxial Energetic Ion Depostition of Superconducting Coatings on Copper RF Cavities for Particle Accelerators

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: 15

    75521-Radio frequency (rf) cavities are a key component in particle accelerators for fundamental high-energy physics research and medical applications. To enhance their capabilities, niobium coated, superconducting copper cavities have shown promise for supporting higher electric field gradients, compared to non-superconducting designs. However, a satisfactory coating method has not been develop ...

    SBIR Phase I 2004 Department of Energy
  9. Off-Route Mine Detection

    SBC: AKELA INC            Topic: A03108

    This proposal seeks to gather a set of data and develop processing and classification algorithms that can be used to detect and identify side attack mines at standoff distances. Data will be collected with a distributed network of wideband radar sensors which is currently in development. Algorithm development will focus on detecting the material composition and resonant response of side attack m ...

    SBIR Phase I 2004 Department of DefenseArmy
  10. Off-Route Mine Detection

    SBC: AKELA INC            Topic: A03108

    The goal of this proposal is to develop a brassboard imaging radar system capable of detecting side attack munitions at standoff distances and operational rates of advance.

    SBIR Phase II 2004 Department of DefenseArmy
US Flag An Official Website of the United States Government