You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Additive Manufacturing for Naval Aviation Battery Applications

    SBC: Storagenergy Technologies, Inc.            Topic: N18AT008

    The objective of the efforts being proposed is to develop high energy density and power density batteries with long cycle life by high-speed additive manufacturing technologies.

    STTR Phase II 2019 Department of DefenseNavy
  2. Advanced Neutrally Buoyant Rechargeable Batteries Based on Ceramic Electrolyte Separators

    SBC: Technology Holding, LLC            Topic: N07T022

    A battery is proposed that utilizes a Li+ conducting, solid-electrolyte separator, LiSICON, Li metal anode and high-capacity cathode. The LiSICON ceramic is fabricated using state of the art tape casting methods which allows composite structures of porous and dense layers ~100ƒÝm thick. The layered structure increase mechanical strength and decrease interfacial and bulk resistances. The high-ene ...

    STTR Phase II 2009 Department of DefenseNavy
  3. Electro-Magnetic Interference Composite Rigid Wall Shelter (EMI CRWS)

    SBC: Conductive Composites Company, L.L.C.            Topic: N172103

    Rigid Wall Shelters (RWS) are an integral building block for Marine Corp operations and support a multitude of operational needs from maintenance and repair operations to command posts and medical operations. There are several critical operational deficiencies with metal RWS. The weight of legacy systems and lack of insulation result in a high cost to transport and difficulty heating and cooling i ...

    SBIR Phase II 2019 Department of DefenseNavy
  4. High Power, High Repetition Rate, Pulsed, Blue Laser for ASW Purposes

    SBC: HOPE TECHNOLOGIES, INC.            Topic: N07114

    A yb laser at 976 nm is a three level system. By placing Sm in the core (to reduce stimulated emission above 1,000 nm) and Yb in a surrounding ring, a more efficient laser at 976 nm can be obtained. This will be Q-switched to serve as the first stage of a pulse source in a MOPA configuration. The second stage will be a HOM fiber designed to amplify the pulses from the first stage. With a HOM fiber ...

    SBIR Phase II 2009 Department of DefenseNavy
  5. Innovative Velocity Sensors

    SBC: Btech Acoustics, LLC            Topic: N141026

    This project involves the development of innovative acoustic motion (accelerometer) sensors with increased tolerances to shock and improving commercial readiness. Investigations and developments of sensor that can withstand is considered.

    SBIR Phase II 2019 Department of DefenseNavy
  6. Marine Assessment, Decision, and Planning Tool for Protected Species (MADPT PS)

    SBC: Marine Acoustics, Inc.            Topic: N08054

    The ultimate objective of this SBIR project is the development of a software-based tool that provides environmental planners, synthetic trainers, and scientific researchers with access to scientific data on marine species. Ready access to pertinent information about a marine species, such as distribution, density, and behavior, is vital for making informed science-based decisions concerning the ma ...

    SBIR Phase II 2009 Department of DefenseNavy
  7. Non-collinear Wave-front Curvature Range Measurement

    SBC: Mikel, Inc.            Topic: N02025

    The goal of this Phase II SBIR is to extract more information from existing submarine acoustic sensors through a highly innovative inter- and intra-sensor correlation algorithmic, in order to provide U.S. submarines with increased acoustic superiority over increasingly quiet adversaries. U.S. adversaries are continuously improving their acoustic quieting technologies through efforts such as marine ...

    SBIR Phase II 2019 Department of DefenseNavy
  8. Ocean Energy Extraction for Sensor Applications

    SBC: Electro Standards Laboratory, Inc.            Topic: N08T021

    "Ocean Energy Extraction for Sensor Applications" has applications on buoy systems to be used by the United States Navy to increase situational awareness and battle-group integration by enabling power independent data acquisition and distributed sensor networks. Electro Standards Laboratories proposes to meet the requirements with mechanical wave energy extraction accomplished using integrated ele ...

    STTR Phase II 2009 Department of DefenseNavy
  9. Open Architecture Tools to Describe Automatic Test Equipment (ATE) Capabilities

    SBC: WESTEST ENGINEERING CORPORATION            Topic: N181009

    Develop innovative methods and associated tools to support the definition of Automatic Test Equipment (ATE) capabilities and their individual instruments using an Open Architecture (OA) approach, to allow for precise understanding of the ATE, interoperability across Navy and DoD electronics maintenance, and improved utilization of Commercial Off-The-Shelf (COTS) tools to support ATE operations. Th ...

    SBIR Phase II 2019 Department of DefenseNavy
  10. Portable Friction Stir Welding Technology for Aluminum Fabrication

    SBC: Advanced Metal Products Inc.            Topic: N07T032

    During Phase I, goals of initial design and demonstration of system concepts for a portable friction stir welding (FSW) system were successfully completed. During Phase II, the objective is to design, fabricate, and demonstrate a portable and versatile FSW system. To support AMP’s design, BYU will continue engineering and application studies in parallel with the design effort. BYU will optimize ...

    STTR Phase II 2009 Department of DefenseNavy
US Flag An Official Website of the United States Government