You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA181002

    This SBIR will demonstrate coaxial thermal imaging using the Stratonics ThermaViz® sensor as a uniquely effective tool for tracking process metrics, at high-speed, during laser powder bed fusion (LPBF). The Phase II project will then develop this sensing technique for LPBF process qualification and closed-loop control. The key is integrating ThermaViz into UTC’s AMSENSE® in situ monitoring arc ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  2. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: ARCTOS Technology Solutions, LLC            Topic: DLA18A001

    This Phase II project aims to assemble the key set of sensor modalities that are needed to reliably view the key process anomalies and properties of laser powder bed fusion. The research team will down-select from the Phase I sensors investigated and integrate the sensors into a sensor fusion software package that facilitates data collection and synchronization, and eventually feedback control of ...

    STTR Phase II 2019 Department of DefenseDefense Logistics Agency
  3. Advanced Lightweight NBC Protective Clothing

    SBC: UTILITY DEVELOPMENT CORP            Topic: N/A

    N/A

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
  4. Composite Stuff-Proof Windshield and Lightweight Pilothouse Assembly

    SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME            Topic: N/A

    The Phase II effort builds on Phase I. Phase II starts with an integrated product and process design and engineering analysis of the baseline structure described in the Phase I report and variants that may reduce cost and risk. The emphasis is on use ofnonlinear FEA with continuum analysis to handle stiffeners, window frames, and connectors. After review and approval by SOCOM, the design is fab ...

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
  5. Increase Competition through Small Business Source Approval Request (SAR) for DLA Nuclear Enterprise Support Office (NESO) NSN: 1095-00-488-0829

    SBC: Brighton Cromwell, LLC            Topic: DLA181006

    This proposal introduces an approach from Brighton Cromwell to Improve product availability and increase competition through the development of Small Business eligible manufacturing utilizing the DLA’s Land and Maritime (L&M) Limited Source National Stock Number (NSN) List. The list contains NSNs with an Annual Demand Value (ADV) >$10K currently sourced with only 1-2 manufacturers. We are offeri ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  6. Innovative CubeSat Payloads for USSOCOM Space Missions

    SBC: A-TECH CORPORATION            Topic: SOCOM17003

    Small satellites have proven capable and cost effective, and innovative payloads and technologies will expand the mission space that CubeSats can support. ATA proposes to build a CubeSat-sized laser communications prototype payload, adapting high photon efficiency optical communications techniques to achieve data transfer rates up to 100 mega-bits per second (Mbps) with the small apertures require ...

    SBIR Phase II 2018 Department of DefenseSpecial Operations Command
  7. Next Generation Portable Power Amplifier

    SBC: MAXENTRIC TECHNOLOGIES LLC            Topic: SOCOM131004

    MaXentric proposes the GAU2x2 wideband power amplifier system. The design combines MaXentric’s wideband RF PA technology with advanced digital signal processing in a single small footprint package. This tight integration is made possible through the extremely high efficiency and low power dissipation. Since very little power is dissipated as heat, the package and heat sink size can be minimized. ...

    SBIR Phase II 2019 Department of DefenseSpecial Operations Command
  8. Remote Runway Survey System to Measure Soil Type, Load Bearing Capacity, Slope and Grades

    SBC: ZYBRON OPTICAL ELECTRONICS, INC.            Topic: N/A

    Traditionally the Air Force Special Operations Forces (AFSOF) physically measures assault zone characteristics such as physical dimensions, magnetic orientation, coordinates, obstacles, elevation, weight-bearing capacity of the soil, soil composition,surface tolerances, clearances, and roughness, terminal navigation aid suitability, etc. It is labor intensive and the operator would be exposed to t ...

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
  9. Reverse Engineering TDPs for Development of Alternate Sources of Supply for DLA NSNs

    SBC: PARTS LIFE INC            Topic: DLA171002

    Parts Life Incorporated (PLI) has completed the SAR Process and Reverse Engineering Risk Avoidance Process (RERAP) to demonstrate its ability to replicate the Seal Asy Hub, 2530-00-736-4672 through quality management programs. The DLA will have a competitive approved source for procurement of the Seal by utilizing PLI's method of manufacturing. The Materials, Equipment, Management, Measurements, E ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  10. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs

    SBC: Brighton Cromwell, LLC            Topic: DLA171002

    In Phase 1, we obtained samples through the RPPOB process, performed due diligence, reverse engineered, created engineering drawings, performed positive material identifications, assigned proper quality control documentation, and all pertinent technical activities to complete a technical data package in accordance with the DLA requirements and submit a SAR for evaluation and acceptance. In this pr ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government