You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. "An Object Oriented Network Data Model for Transportation GIS"

    SBC: Gis/trans, Ltd            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  2. "MAGLEV OPTICAL DETECTION OF OBSTACLES (MODO)"

    SBC: Aspen Systems, Inc.            Topic: N/A

    THE REALIZATION OF SAFE, HIGH-SPEED MAGLEV OR STEEL WHEEL GROUND TRANSPORTATION WILL REQUIRE A RELIABLE SYSTEM TO DETECT OBSTACLES IN THE GUIDEWAY AT A CONSIDERABLE DISTANCE. REQUIREMENTS INCLUDE ALL-WEATHER OPERATION, DAY TIME AND NIGHT TIME OPERATION, AND THE DETECTION OF OBSTACLES AROUND THE GUIDEWAY CURVE (NOT IN LINE OF SIGHT). IN ADDITION THE SYSTEM MUST BE SAFE FOR PASSENGERS ON THE TRAIN, ...

    SBIR Phase II 1994 Department of Transportation
  3. "Photistors": Optoelectronic Switches

    SBC: Spire Corporation            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  4. "Rolling Deflectometer"

    SBC: Applied Research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase II 1996 Department of Transportation
  5. 2 TO 3 MICRON INGAAS DETECTOR ARRAYS

    SBC: Spire Corporation            Topic: N/A

    N/A

    SBIR Phase I 1996 National Aeronautics and Space Administration
  6. 2.3 Micrometer Sensitive, High Speed, Extended InGaAs Avalanche Photodiodes

    SBC: Spire Corporation            Topic: N/A

    In Phase I, Spire will epitaxially grow, fabricate, and test two types of avalanche photodiodes (APDs) using 0.55 eV (2.3 mm cutoff wavelength) indium gallium arsenide In0.72Ga0.28As. This material will be "extended" past the common 0.74 eV lattice-matched In0.53Ga0.47As by use of an InxGa1-xAs grading layer. One APD type will have both absorption and multiplication/junction regions in the 0.55 ...

    SBIR Phase I 1996 Department of DefenseAir Force
  7. 3-5 UM INTLAS DETECTOR ARRAYS WITH MINIMUM COOLING REQUIREMENTS

    SBC: Spire Corporation            Topic: N/A

    N/A

    SBIR Phase I 1996 National Aeronautics and Space Administration
  8. 3-D Graphite-Copper Composite Heat Exchanger

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    Foster-Miller proposes a 3-D graphite-copper (Gr/Cu) composite to meet the strength and transverse thermal conductivity criteria set forth in the solicitation. In conjunction with the NASP office of Rocketdyne, Phase I will develop this unique composite to replace the current NARloy Z heat exchanger for the NASP ramjet inlet. The 3-D Gr/Cu composite is comprised of a 2-D graphite fiber textile in ...

    SBIR Phase I 1994 Department of DefenseAir Force
  9. 4-Dimensional Remote Sensing of the Marine Boundary Layer with a Digital Beamforming Radar Wind Profiler

    SBC: Prosensing, Inc.            Topic: N/A

    This proposal describes a proposed four-dimensional turbulence profiling radar for shipboard use. This radar, termed the Turbulent Eddy Profiler (TEP), is a unique system that continuolusly monitors the intensity of atmospheric turbulence over approximately three thousand volume cells and updates these measurements several times a minute. Using a technique called digital beamforming the TEP system ...

    SBIR Phase II 1994 Department of DefenseNavy
  10. 500 MW Axial Free Electron Laser Microwave Power Source

    SBC: Jp Accelerator Works            Topic: N/A

    40900 November 18, 1996 JP Accelerator Works, Inc. Linear collider accelerator systems, proposed to extend the frontiers of high energy physics research, require thousands of megawatts of peak rf power at microwave frequencies. Existing rf power devices such as klystrons are limited in rf peak power to levels that would require thousands of devices to po ...

    SBIR Phase I 1996 Department of Energy
US Flag An Official Website of the United States Government