List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. MESOSCALE ENVIRONMENTAL NOWCASTING FOR TACTICAL ARMY OPERATIONS

    SBC: Aeromet, Inc.            Topic: N/A

    A PLAN FOR THE DEVELOPMENT OF A MESOSCALE WEATHER NOWCASTING SYSTEM IS PROPOSED. THAT SYSTEM WOULD BE USED AS A TACTICAL DECISION AID FOR SUPPORT OF TACTICAL ARMY OPERATIONS. THE SYSTEM WOULD BE COMPOSED OF MODULAR SENSOR PACKAGES, A TELEMETRY SYSTEM, A FLEXIBLE SYSTEM OF SENSOR DEPLOYMENT, AND A MICROPROCESSOR BASED TACTICAL COMPUTER SYSTEM FOR THE ANALYSIS AND DISPLAY OF DATA COLLECTED. THE PROP ...

    SBIR Phase I 1987 Department of DefenseArmy
  2. VARIATIONAL EVALUATION OF EM COUPLING TO A WIRE INSIDE A CAVITY

    SBC: Applied Physics Technologies            Topic: N/A

    CONTRACTOR WILL DEVELOP A LAGRANGIAN FORMULATION FOR THE ELECTROMAGNETIC RESPONSE OF A METALLIC ENCLOSURE WITH THIN, SLIGHTLY DIFFUSIVE WALLS AND A WIRE SPANNING THE ENCLOSURE. CONTRACTOR WILL FIRST DERIVE A LAGRANGIAN OPERATOR ON THE FIELDS WHICH IS STATIONARY WHEN MAXWELL'S EQUATIONS ARE SATISFIED. THE LAGRANGIAN WILL THEN BE USED TO DETERMINE THE ENCLOSURE EIGENMODES (WIRE INCLUDED) AND THE AMP ...

    SBIR Phase I 1987 Department of DefenseArmy
  3. EMP ENVIRONMENT PREDICTION FOR COLLIMATED SOURCES

    SBC: Applied Physics Technologies            Topic: N/A

    CODES CURRENTLY EXIST THAT WILL CALCULATE THE ELECTROMAGNETIC ENVIRONMENT (EMP) PRODUCED BY A BEAM OF COLLIMATED GAMMA RAYS. THE COLLIMATION MAY BE EITHER CYLINDRICAL OR CONICAL. THE CURRENT EFFORT WILL BE TO INSTALL THE CODES ON AN ARMY CRAY COMPUTER AND TO SET THEM UP AND RUN THEM FOR PROBLEMS OF INTEREST TO THE ARMY.

    SBIR Phase I 1987 Department of DefenseArmy
  4. DEVELOPMENT OF A HIGH RANGE PARTICLE VELOCITY GAGE

    SBC: Applied Research Associates, Inc.            Topic: N/A

    THERE IS AN ESTABLISHED NEED FOR A SIMPLE ROBUST TRANSDUCER TO MEASURE PARTICLE VELOCITY IN SEVERE BLAST AND SHOCK ENVIRONMENTS SUCH AS NUCLEAR AND HIGH EXPLOSIVE TESTS. A GAGE CONCEPT IS PROPOSED FOR DEVELOPMENT, BASED ON THE PROVEN MEASUREMENT PRINCIPLES USED IN THE HIGHLY SUCCESSFUL DX GAGE, BUT RECONFIGURED MECHANICALLY AND ELECTRICALLY TO WITHSTAND THE HARSH SHOCK ENVIRONMENTS. THE CONCEPT RE ...

    SBIR Phase I 1987 Department of DefenseArmy
  5. Non-Eroding Fin Materials

    SBC: Applied Research Associates, Inc.            Topic: N/A

    This project will analyze and select promising materials and designs to be used in the plumes of tactical solid rocket motors for missile steering and control. The emphasis is on high-performance refractory materials and compatibility of material systems. The control fins experience severe thermal and severe particulate erosion environments. Missile controllability requires fins with minimal er ...

    SBIR Phase I 1996 Department of DefenseArmy
  6. DETERMINING FIBER VOLUME FRACTION AND POROSITY IN ORTHOTROPIC COMPOSITE LAMINATES

    SBC: BERGEY WINDPOWER COMPANY, INC.            Topic: N/A

    ULTRASONIC NONDESTRUCTIVE TESTING HAS BECOME THE METHOD OF CHOICE FOR THE QUALITY ASSURANCE OF ADVANCED COMPOSITE MATERIALS. THE PROPOSED RESEARCH PROGRAM COVERS THE DEVELOPMENT OF A COMPUTER-BASED NDT METHOD FOR DETERMINING LOCAL FIBER VOLUME FRACTION AND RESIN POROSITY IN PRACTICAL LAMINATED COMPOSITES. THE COMPUTER ALGORITHMS WILL BE BASED ON EARLIER STUDIES THAT HAVE BEEN SUCCESSFUL FOR UNIDIR ...

    SBIR Phase I 1987 Department of DefenseArmy
  7. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  8. Reactor for Control of Fugitive Emissions of Toxic Gases

    SBC: Coyote Aerospace/high Mesa            Topic: N/A

    A need to control the fugitive emissions of hazardous vapors, volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) has been identified in operations at Army plants and depots. The High Mesa Technologies (HMT)/Coyote Aerospace team proposes to meet this need using proven silent discharge plasma (SDP) techniques, developed by the Electric Power Research Institute and Los Alamos Nat ...

    SBIR Phase I 1997 Department of DefenseArmy
  9. Numerical Simulation of Dynamic Stall

    SBC: Ecodynamics Research Associate            Topic: N/A

    The objective of the proposed program is to develop, demonstrate and validate a three-dimensional, time-dependent, compressible Navier-Stokes program for predicting dynamic stall. The foundation of the program is an existing 3-D program that has been developed under prior SBIR funding for retreating-blade dynamic stall on modern high-performance helicopter rotors. The program will be improved in ...

    SBIR Phase I 1996 Department of DefenseArmy
  10. DEVELOPMENT OF APPROXIMATIONS FOR A FAST-METHOD OF MOMENTS TECHNIQUE BASED ON NORMAL MODES

    SBC: Electro Magnetic            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government