Award Data

The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

WE PROPOSE TO SEARCH FOR NEW SUPERCONDUCTORS THAT ARE SIMILAR TO THE PEROVSKITE-BASED HIGH TEMPERATURE SUPERCONDUCTORS (HTS), BUT WITH THE OXYGEN REPLACED BY A CHALCOGEN, THAT IS SULFUR, SELENIUM OR TELLURIUM. WE BELIEVE THAT THE HTS COPPER OXIDES ARE NOT A UNIQUE ACCIDENT OF NATURE, BUT THAT THERE ARE OTHER COMPLEX CHEMICAL COMPOUNDS THAT COULD ALSO BE SUPERCONDUCTING. AN OBVIOUS PLACE TO LOOK WO ...

This Phase I SBIR demonstrates the underlying technology required to construct an ultraspectral imager that has the ability to spectrally resolve molecular absorption lines while simultaneously creating a two dimensional spatial mapping. The proposed instrument will have a spectral resolution that is better than 2 cm-1 and two dimensional spatial resolution that exceeds 2 milliradian. Based on Fou ...

Sensors, capacitors, and conducting features such as resistors and capacitors on circuit boards are produced from metal and ceramic powders 1-12 These powders are manufactured by liquid phase precipitation routes which often start with reduction of metal salts or by solid-state routes where solid reactants are mixed, heated and then milled. The solid-state processing is generally repeated several ...

Optomec Design Company proposes to use Laser Engineered Net Shaping (LENSTM), a Rapid Prototyping and Manufacturing (RP&M) technology currently under development at Sandia National Laboratories (SNL), as a new method for integrating instrumentation (e.g., embedded sensors) into metal structural components. SNL has demonstrated the ability of the LENSTM technology to produce near net shape stainles ...

The advanced technology described in this proposal promises to increase the performance of laboratory and, specifically, tabletop x-ray lasers by up to an order of magnitude. Such gains in performance coupled with compact technology will lead to the introduction of the world s first table-top, commercial x-ray laser. Tetra proposes to develop an advanced driver for the laboratory laser based upo ...

NON-NUCLEAR APPROACHES ARE SOUGHT FOR HIGH ENERGY DENSITIES FOR SPACE POWER SYSTEMS. ONE CRITICAL COMPONENT TO ACHIEVE IMPROVED PERFORMANCE IS CAPACITOR STORES. THESE ARE DEPENDENT UPON ADVANCES IN LOW LOSS, HIGH ENERGY/HIGH POWER DENSITY STORAGE MATERIALS. A UNIQUE INORGANIC COMPOSITE IS PROPOSED FOR INVESTIGATION AS A HIGH ENERGY DENSITY STORAGE MATERIAL. AN APPROACH IS FORMULATED BASED ON SOL-G ...

Glass is an attractive material for microelectronic packaging because it is hermetically sealing, has a low coefficient of thermal expansion, and is compatible with d.c. circuits. Unfortunately, the working temperature of glass is too high for this application. Low-temperature processing of a sol-gel derived, aluminosilicate material for hermetic seals is proposed for electronic packaging. This ...

Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

Rocket motors that develop greater thrust with lower weight and volume require-ments are an ever present goal of the BMDO. One method of providing this is through formulation of higher energy propellant mixtures. TPL proposes to develop a new method of effectively producing new high perfor-mance propellant constituents for launch, orbit-orbit transfer and station keeping propulsion systems. The p ...