You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  2. EMP AND HPM SUPPRESSION TECHNIQUES

    SBC: Integrated Sciences            Topic: N/A

    Survival of present day microelectronic circuits depends on their protection from self generated and external electromagnetic interference. This proposal is oriented toward the class of interference generally referred to as overvoltage transients. Means for mitigating these transients include gas discharge tubes, and various solid state devices. Each of these has their own advantages in particu ...

    SBIR Phase I 1996 Department of DefenseDefense Threat Reduction Agency
  3. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  4. Low Cost, Portable X-Ray Simulator Development

    SBC: North Star Research Corp.            Topic: N/A

    We propose, in Phase I and Phase II, to build an X-ray simulator capable of easy transportation between sites which can be built for a low cost (

    SBIR Phase I 1997 Department of DefenseDefense Threat Reduction Agency
  5. Data Analysis Tools for HLA Simulations

    SBC: OPTIMETRICS, INC.            Topic: N/A

    OptiMetrics, Inc. proposes to develop real-time monitoring and after action review tools specifically designed to function in advanced HLA simulation environments. The development approach will include: Tailoring tools to user requirements; A highly object-oriented design; A layered design to interface between our software and the external interfaces (e.g., HLA/RTI); A preference for COTS or GOT ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. Commercial Game Development Using HLA and SEDRIS

    SBC: CYBERNET SYSTEMS CORPORATION            Topic: N/A

    Significant similarities exist between DoD simulation applications and networked simulation games developed for entertainment. To date, however, there has been no compelling reason for commercial game developers to adopt DoD methods and standards. Interestingly, HLA compares favorably to current commercial solutions like Microsoft's DirectPlay. There is clear benefit to DoD if HLA is embraced b ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. Laser Turbulence Measurements in the LB/TS

    SBC: Applied Research Associates, Inc.            Topic: N/A

    Turbulence of gas flows by its very nature is one of the most difficult things to model and measure. We propose to develop a new way of measuring the turbulence and to compare these measurements to predictions using the k-epsilon model. Typical measurements, in the past, use smoke, Schlierin or shadow graph techniques to visually infer turbulence characteristics. These features are either motio ...

    SBIR Phase I 1997 Department of DefenseDefense Threat Reduction Agency
  8. Nuclear Weapons Effects Phenomenology

    SBC: Applied Physics Technologies            Topic: N/A

    The nuclear weapons community has traditionally focused on the next generation or level of weapon capability complimented by gathering and analysis of actual test data. Now, with the cessation of actual weapons testing, there is an increased need to use the actual test data in modeling techniques to better understand the phenomenology and potential effects of nuclear weapons. The first phase of ...

    SBIR Phase I 1997 Department of DefenseDefense Threat Reduction Agency
  9. Response of Dry Spore Biological Agets and Surrogates to Weapons Environment

    SBC: SCIENCE & ENGINEERING ASSOC., INC.            Topic: N/A

    The Defense Nuclear Agency hase undertaken several related programs to develop new technologies for countering the proliferation of weapons of mass destruction, including weapons which disperse dry spore biological agents. These initiatives require an increased understanding of the response o fthese agents and their surrogates to the environments generated by various weapons, including penetratin ...

    SBIR Phase I 1996 Department of DefenseDefense Threat Reduction Agency
  10. A FUEL/AIR DRIVE FLUX COMPRESSOR POWER UNIT FOR ELECTROTHERMAL GUNS

    SBC: KTECH CORP.            Topic: N/A

    The Ktech Team proposes a feasibility study of a fuel/air driven flux compression power unit (FCPU) for electric guns. Through variations of inductance gradients and through changes in scale, the proposed technology will be applicable to both electrothermal/chemical and electromagnetic guns. In the Phase 1 effort, we develop simulation models to predict the performance of the flux compression po ...

    SBIR Phase I 1996 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government