Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced Six-Degree-of-Freedom (6-D) Laser Measurement System

    SBC: AUTOMATED PRECISION INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  2. Fiber-Optic Instrumented Garments

    SBC: BIG LIGHT TECHNOLOGY, INC.            Topic: N/A

    Big Light Technology, Inc. proposes to develop a light weight, comfortable, flexible, form fitting instrumented garment. The instrumented garment will be capable of monitoring the skin temperature at multiple localized torso locations using fiber-optic sensors incorporated on a single optical fiber. The sensors are passive and will therefore require no external power. The method for monitoring ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  3. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Wide Area Virtual-Prototyping Environment (WAVE)

    SBC: MODUS OPERANDI, INC.            Topic: N/A

    Most government and commercial engineering organizations are under pressure to reduce system development time and costs while increasing overall quality. Modus Operandi proposes to combine the most promising new technologies for remote collaboration, Virtual Reality Prototyping, and tool integration into an innovative environment with significant benefits for complex engineering efforts. The Wide ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  5. Simulation and Analysis of Fire Evacuation (SAFE)

    SBC: MODUS OPERANDI, INC.            Topic: N/A

    Unlocking the vast resources represented by models and the domain knowledge they contain, and facilitating greater reuse of simulations based on those models, is of paramount importance to the DoD. The DoD has proposed the High Level Architecture (HLA) as a means to achieve reuse by enabling the federation of disparate simulations. To demonstrate the broader value of the HLA, SPS is proposing an ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC.            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. A HYBRID REVERSIBLE INTEGAR INTER-BAND DECORRELATION TECHNIQUE FOR LOSSLESS/LOSSY HYPERSPECTRAL IMAGE COMPRESSION

    SBC: LNK CORP., INC.            Topic: N/A

    The placement of hyperspectral sensors on future Unmanned Air Vehicles is constrained by a data bottleneck caused by the limited downlink bandwidth. This proposal addresses this problem by developing a lossless compression algorithm that is optimized for hyperspectral imagery. Hyperspectral imagers generate 3-D data whose two axes correspond to spatial directions and the third to spectral respon ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  8. High Throughput Multiple Access Digital Wireless Communications

    SBC: AIMS, INC.            Topic: N/A

    We propose a radically innovative approach to the problem of multiple access communication which promises to revolutionize the modern communication industry by dramatically increasing network throughput. Our approach is based upon two major novel components: (i) hybrid time-frequency allication of communication channel resources, and(ii) non-orthogonal, i.e., overlaping, multiplexed signals. Toge ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  9. FEROELECTRIC SCANNED ARRAY (FESA)

    SBC: ATLANTIC AEROSPACE ELECTRONICS CORP.            Topic: N/A

    A novel beamforming network is proposed to electronically scan two independent beams in a conformal phase array. The beamformer utilizes ferroelectric materials in the RF distribution network to control the amplitudes and phases of the array element excitations. One beamformer board is required for each beam and four low power DC voltages per beamformer are needed to achieve total hemispherical ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  10. WIRELESS ATM ON ASYMMETRIC DATALINKS

    SBC: SCIENTIFIC RESEARCH CORP.            Topic: N/A

    SRC plans to support the acceleration of ATM and wireless network convergence by developing an Asymmetric Wireless ATM Module (Asymmetric WATM Module). SRC will leverage its experience and resource from designing and developing the Survivable ATM system, a fixed point-to-point wireless system currently being funded by Rome Laboratory. The Survivable ATM System will be utilized as a building bloc ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government