Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. A HYBRID REVERSIBLE INTEGAR INTER-BAND DECORRELATION TECHNIQUE FOR LOSSLESS/LOSSY HYPERSPECTRAL IMAGE COMPRESSION

    SBC: LNK CORP., INC.            Topic: N/A

    The placement of hyperspectral sensors on future Unmanned Air Vehicles is constrained by a data bottleneck caused by the limited downlink bandwidth. This proposal addresses this problem by developing a lossless compression algorithm that is optimized for hyperspectral imagery. Hyperspectral imagers generate 3-D data whose two axes correspond to spatial directions and the third to spectral respon ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  2. A Remarkable Material for Advanced CMC Propulsion Systems

    SBC: Ceramic Composites, Inc.            Topic: N/A

    The development of a remarkable Ti3SiC2 material for use in ceramic matrix composite (CMC) fiber coatings and matrix laminates is proposed. This material possesses a myriad of favorable properties for high temperature structural applications - demonstrating machinability, strength, ductility, oxidation resistance and thermal shock resistance never before observed in a single phase material. Prop ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. Advanced Six-Degree-of-Freedom (6-D) Laser Measurement System

    SBC: AUTOMATED PRECISION INC.            Topic: N/A

    In order to remain competitive in today's global marketplace, U.S. manufacturers are constantly striving to hold tighter and tighter tolerances on the parts that they produce. What this means is that the manufacturer needs to better control the machines that they use, and in order to do that they need an instrument that can quickly and easily characterize the geometric properties of the machines ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  4. Advanced Six-Degree-of-Freedom (6-D) Laser Measurement System

    SBC: AUTOMATED PRECISION INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  5. Database Conversion Software

    SBC: ACUSOFT, INC.            Topic: N/A

    AcuSoft proposes to research and develop a database conversion tool based on the Synthetic Environment Data Representation and Interchange Specification (SEDRIS) to maximize the reusability and interchangeability of existing and future USSOCOM database. In the proposed PHASE I effort, we will investigate SEDRIS technology and develop a functioning prototype tools to demonstrate the ability to imp ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  6. Demonstration of CWA-Reactive, Non-Irritating rTSPFormulations (MEC Proposal No.808DB2054)

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: N/A

    Mainstream has demonstrated the effectiveness of a new family of metal alloy powders (patent-pending) in immobilizing chemicals such as halocarbons, alkenes, and H and G CWA simulants. These materials must now be feasibility tested in complete product formulations. There is also the potential for unexpected synergisms of these compounds with the other skin cream ingredients. A considerable amou ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  7. Electronically Scanned Phased Array Antenna (ESA)

    SBC: Wang Electro-Opto Corporation            Topic: N/A

    It would be highly desirable for military aircraft to utilize low-power radar when operating in all-weather conditions and low altitudes. The problem with this class of radar is that it requires a large antenna to receive an acceptable return to conduct operations. While such an antenna is acceptable for fixed wing aircraft, it is not for rotary and tilt-rotor aircraft because on-board size and ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  8. Examination of Emerging Haptic Tactor Technology

    SBC: STEADFAST TECHNOLOGIES            Topic: N/A

    Existing tactile display technology is too large, and too delicate for many SOF uses. In addition, it is not suited to working underwater in non-magnetic applications. Pneumatic tactors already meet SOF requirements, but existing drivers for this type of tactor have used electric motors or voice coils, with an associated large magnetic field. The proposed work will focus on the further developme ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  9. FEROELECTRIC SCANNED ARRAY (FESA)

    SBC: ATLANTIC AEROSPACE ELECTRONICS CORP.            Topic: N/A

    A novel beamforming network is proposed to electronically scan two independent beams in a conformal phase array. The beamformer utilizes ferroelectric materials in the RF distribution network to control the amplitudes and phases of the array element excitations. One beamformer board is required for each beam and four low power DC voltages per beamformer are needed to achieve total hemispherical ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  10. Fiber-Optic Instrumented Garments

    SBC: BIG LIGHT TECHNOLOGY, INC.            Topic: N/A

    Big Light Technology, Inc. proposes to develop a light weight, comfortable, flexible, form fitting instrumented garment. The instrumented garment will be capable of monitoring the skin temperature at multiple localized torso locations using fiber-optic sensors incorporated on a single optical fiber. The sensors are passive and will therefore require no external power. The method for monitoring ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government