Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Optical Patternation of Sprays

    SBC: PRINCETON SCIENTIFIC INSTRUMENTS, INC.            Topic: N/A

    The proposal is to develop a high frame rate imaging system for combustion and other research, by combining a solid state camera capable of capturing images of transient photometric phenomena at framing rates up to 1,000,000 frames per second with the laser sheet illumination technology that has been developed by the Propulsion Directorate of Phillips Laboratory. Both instrumental technologies ar ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  2. Extended Mission Low Power Concepts for Portable Computing Environment (T-103-96)

    SBC: TERI RESEARCH, INC.            Topic: N/A

    The proposed research will focus on leveraging significant technology breakthroughs in reduced power electronic components and computer power saving devices necessary to achieve the desired operating times and mission endurance for Soldier Command and Control (C2) System products. Researching and maturing selected key low power technologies is proposed to enhance the effectiveness of these systems ...

    SBIR Phase II 1997 Department of DefenseOffice of the Secretary of Defense
  3. A Diode Laser Multigas Analyzer for Advanced Detection of Fires

    SBC: Southwest Sciences, Inc.            Topic: N/A

    Southwest Sciences will develop a novel fire detection technology based on optical spectroscopy, using diode lasers and fiber optics. Rapid, quantitative detection of part per million concentrations (or better) of multiple gases, including carbon monoxide, carbon dioxide, hydrogen cyanide, hydrogen chloride, and a fiber optical distribution network permits one laser to be used for at least 800 di ...

    SBIR Phase II 1997 Department of Commerce
  4. An Expert System for Aquaculture Environment Control

    SBC: Ortech Engineering Inc.            Topic: N/A

    This Small Business Innovation Research Phase I project will explore the use of a fuzzy logic based expert system in a closed loop control system for nitrate removal (denitrification) from large aquaculture systems. Nitrate is naturally generated by the bio-mass in any aquatic system. Current techniques for the control of nitrate levels are almost exclusively based on water exchange. For large ...

    SBIR Phase II 1996 Department of Commerce
  5. A Virtual Machining and Inspection System (VMIS)

    SBC: Icamp, Inc.            Topic: N/A

    The purpose of the VMIS is to allow manufacturers the luxury of testing and perfecting manufacturing plans long before a single machine tool is turned on and resources are committed. The VMIS will allow the user to select an available machine tool and an available inspection device, specify a proposed inspection plan and a dimensional analysis procedure, and then build and inspect hundreds (or ev ...

    SBIR Phase II 1996 Department of Commerce
  6. Ultra-Textured Active polymer (UTAP) Composite for High-Performance Intelligent Acoustic Transducers

    SBC: Ceramare Corporation            Topic: N/A

    This Small Business Innovative Research Phase I project seeks to combine the enhanced piezoelectric properties of single crystal perovskite ferroelectrics, recently discovered at Pennsylvania State University, with the electrostrictive properties of polyurethane to make a new class of "smart" materials for acoustic transducers. A tape casting process is used to form composite sheets compromising ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  8. Optical Patternation of Sprays

    SBC: PRINCETON SCIENTIFIC INSTRUMENTS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  9. Simulation and Analysis of Fire Evacuation (SAFE)

    SBC: MODUS OPERANDI, INC.            Topic: N/A

    Unlocking the vast resources represented by models and the domain knowledge they contain, and facilitating greater reuse of simulations based on those models, is of paramount importance to the DoD. The DoD has proposed the High Level Architecture (HLA) as a means to achieve reuse by enabling the federation of disparate simulations. To demonstrate the broader value of the HLA, SPS is proposing an ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  10. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC.            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government