Award Data

ABSTRACT: The PNTS team has team has defined a schema using an active metamaterial exhibiting an externally driven electromagnetic response driven by the sensing of external radiation effects. The novel, groundbreaking concept, employs a semiconductor slab hosting BENEFITS: The team feels that its novel capabilities, with the potential for low cost for manufacturing and implementation, in the mos ...

ABSTRACT: Boron coated straw detectors developed by Proportional Technologies, Inc have proven to perform exceptionally well in many neutron detection applications of interest to DOD. Over the last several years PTI has delivered many systems to government branches BENEFITS: The project will develop a cost effective neutron detector capable of determining both direction and energy content of a neu ...

Increasing the autonomy of unmanned vehicles potentially reduces operator workload and cognitive load. Realizing the promise of autonomy however, is difficult when deploying in environments with mobility and visibility challenges, enemy threats, risks of endangering civilians, and limited communication. Achieving full autonomy in the face of these challenges is both a hard technical problem and do ...

Florida Turbine Technologies proposes an oil-free bearing shaft support system for an Unmanned Aerial System (UAS) internal combustion (IC) engine turbocharger. During the course of Phase 1, FTT will design a light-weight high performance UAS turbocharger for IC engines in the 150 horsepower class. A conceptual design of the turbocharger system capable of providing sufficient boost pressure wil ...

Mainstream Engineering will use state-of-the-art technology and manufacturing processes to develop an innovative, high speed, lightweight fuel injection system capable of providing multiple injections per engine cycle at engine speeds up to 6000 RPM. To overcome the barriers associated with spark ignition of direct-injected heavy fuel (JP5, JP8, etc.), Mainstream will leverage previous internal re ...

We propose to develop reactive composite materials with sufficient strength and stiffness to serve as structural components for penetrating weapons and other munitions. The composites will consist of two materials that react with each other, in either oxidation-reduction (such as in a thermite) or bimetallic reactions. One component will be in the form of fiber, wire, or wire-mesh, within a bondin ...

AcuSoft proposes to develop a set of HLA Development Tools to assist simulation software developers in their efforts to implement the HLA. The HLA Development Tools will support the Federation Execution and Development Process (FEDEP) and present an approach to solving the problems associated with the HLA's flexible FOM data definitions. A set of data visualization tools, such as a 2D Plan View ...

AcuSoft proposes to research and develop a Synthetic Environment RTI (SE-RTI). The SEDRIS initiative has established a new programming paradigm that provides lossless transmission of synthetic environment objects. The HLA has been designed to support interoperability and reuse of DoD simulations, and SEDRIS is a major component of HLA. Currently, the SEDRIS data model, APIs and format are prima ...

The Defense Special Weapons Agency (DSWA) has identified a need to improve the radiation hardness of advanced integrated circuit technologies. To be practical, this must be achieved in a cost effective way. This proposal by AET, Inc. directly addresses these concerns. Specifi-cally, this proposal provides a means to achieve significant advance in radiation hardness of large scale integrated cir ...

The nuclear weapons community has traditionally focused on the next generation or level of weapon capability complimented by gathering and analysis of actual test data. Now, with the cessation of actual weapons testing, there is an increased need to use the actual test data in modeling techniques to better understand the phenomenology and potential effects of nuclear weapons. The first phase of ...