Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  2. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  3. Training and Development of Key Skills that Contribute to Leadership and Team Effectiveness in Multinational Teams

    SBC: MIRUM CORP.            Topic: N/A

    "Mirum proposes to develop a training intervention that targets the leader and team attributes needed for effectiveness in military multinational teams. This effort will also yield a diagnostic tool that can be used to appraise the need for traininginterventions in multinational teams. Anticipated changes in the military's operating environment argue for the ascendant importance of attributes th ...

    SBIR Phase I 2002 Department of DefenseOffice of the Secretary of Defense
  4. Hydrogen Supply System for Small Proton Exchange Membrane (PEM) Fuel Cell Stacks

    SBC: Royal Systems/ Associated            Topic: N/A

    1. A conceptual baseline design of a hydrogen supply system with a on/off capability will be prepared for delivering hydrogen in increments of up to 10g/hour with a total capacity of 120g hydrogen. This baseline design will be based upon a solid state hydrogen reactant mixture with a yield of 8% by reactant weight which has been previously qualified for military use. ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  5. Diode Laser-Based Ketosis Sensor

    SBC: Southwest Sciences, Inc.            Topic: N/A

    This Small Business Innovation Research Phase I proposal will lead to the development of a sensor for detection of the early onset of ketosis by breath acetone measurements. The device will be hand-held, lightweight, and battery-powered. Near-infrareddiode laser measurement of a gas-solid reaction product of acetone will afford increased sensitivity. The sensor will provide a rapid measurement ...

    SBIR Phase I 2002 Department of DefenseOffice of the Secretary of Defense
  6. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC.            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  7. Reduction of Motion Side Effects and After Effects

    SBC: ARTIS, L.L.C.            Topic: N/A

    "The team of Artis, LLC, Noesis, Inc. and Brandeis University will address four objectives in Phase I. First, we will develop a system, the Virtual Motion Induction System (VMIS), that couples the sensed motion in the environment to a simulatedenvironment. The purpose of VMIS is to reduce the onset and severity of motion side effects. Second, we will test VMIS on multiple laboratory motion plat ...

    SBIR Phase I 2002 Department of DefenseOffice of the Secretary of Defense
  8. Improved Methanol Permeability for Direct Methanol Fuel Cells

    SBC: Nanosonic Inc.            Topic: N/A

    "The purpose of the proposed OSD Phase I program is to develop and commercialize ion-conducting thermally stable polymers for use as high temperature proton exchange membrane/membrane electrode assemblies (PEM/MEA) materials with low methanol permeabilityas components of direct methanol fuel cells (DMFC). Polymer electrolyte/proton exchange membrane (PEM) fuel cell systems are an environmentally ...

    SBIR Phase I 2002 Department of DefenseOffice of the Secretary of Defense
  9. Non-Invasive, Continuous, Transdermal Glucose Monitor w/Actuator Control

    SBC: ADVANCED SENSOR TECHNOLOGIES, INC.            Topic: N/A

    "AST proposes to develop a non-invasive methodology able to continuously monitor blood glucose concentration. As opposed to employing near infrared spectroscopy, which suffers from the limitations of sensitivity, stability, and repeatability, AST intendsto employ direct measurement of glucose, via amperometric sensors coated with glucose oxidase membranes, from minute amounts of interstitial flui ...

    SBIR Phase I 2002 Department of DefenseOffice of the Secretary of Defense
  10. HLA Federation Implementation Tools

    SBC: SYNETICS, INC.            Topic: N/A

    Developing a set of tools that is automated, integrated, and compliant with the deired goals of this SBIR is not a simple task. If a coordinated approach is not taken from the start, then a hodgepodge of tools and capabilities for a hodgepodge of environments wil be developed with unwanted outcome of falling short of the desired goals. Therefore, SYNETICS proposes to establish a CASE-like enviro ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government