You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Protection Against Warfare Agents by Using Perm-selective Elastomeric Mesoporous Membranes

    SBC: American Research Corporation of Virginia            Topic: N/A

    Recent experiences in the Gulf War have shown the need for chemical and biological protective gear having reduced associated physiological burden for combat personnel and decreased logistical requirements. The availability of lightweight, permeation-selective barrier membranes would constitute an advantage to military personnel by reducing the buildup of moisture within the suit. The development ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  2. Computer Enhanced Eddy Current Detection of Hidden Substructure Edges and Holes

    SBC: American Research Corporation of Virginia            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  3. Small Lot Repair/Manufacture of Microcircuit Boards by Laser Deposition

    SBC: Cm Consulting            Topic: N/A

    The final prototype of the Microcircuit Board Repair apparatus will be capable of laying down or lifting metal strips with micrometer dimensions. Under real time computer control, the translation stages will be fully automated or manually controlled. The end user will monitor the process in real time using a camera attached with the source. Laying down the metal lines will be done using Laser C ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Hydrogen Supply System for Small Proton Exchange Membrane (PEM) Fuel Cell Stacks

    SBC: Royal Systems/ Associated            Topic: N/A

    1. A conceptual baseline design of a hydrogen supply system with a on/off capability will be prepared for delivering hydrogen in increments of up to 10g/hour with a total capacity of 120g hydrogen. This baseline design will be based upon a solid state hydrogen reactant mixture with a yield of 8% by reactant weight which has been previously qualified for military use. ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  5. Novel Matrix Addressable Sonar Transducer

    SBC: Sensortex            Topic: N/A

    This Small Business Innovation Research Phase I will fabricate a new transducer element, which is matrix addressable, conformable and low cost. It is based on the use of a composite magnetoelectric film fabricated as a hollow cylinder. This cylinder contains both the sensing elements and the matrix-forming element. This approach builds on previous work on a composite laminar maggetoelectric mat ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  6. Optical Security System using Phase Encrypted Identification Codes in a Joint Transfor Optical Correlator Verification & Validation

    SBC: SY TECHNOLOGY, INC.            Topic: N/A

    This Phase I effort will ascertain the practical aspects of assemblin g a cost-effective, reliable, compact optical security system using phase-encryption of identification data in conjunction with phase- and/or amplitude-encoded biometric signatures and develop a preliminary design and demonstration plan for Phase II. For this Phase I effort, we will use fingerprints as the primary biometric iden ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  7. Porous Sol-Gel Derived Ceramic Release Agent

    SBC: TPL, INC.            Topic: N/A

    Breathable release coatings that can withstand processing conditions up to 750F are needed for use on ceramic tooling. In situ removal of volatiles in solvent-based composite processing is a critical issue that will enable production of high quality parts at lower cost per part. Current release coatings meet neither the temperature nor the solvent transport requirements of solvent-based composit ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
  8. STRUCTURED SAR IMAGERY FOR OBJECT CHANGE DETECTION AND EXPLANATION

    SBC: DATAMAT SYSTEMS RESEARCH, INC.            Topic: N/A

    The objective of this project is to develop methodology and prototype algorithms for object-level change detection and change explanation using structural SAR image data. Structural SAR image is obtained by the filtration, detion and transformation of local pixel-level formations of strong and weak electromagnetic (EM) responses into higher-level geometric and morphological micro-elements. These ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  9. Distributed Sensors for Monitoring of Actual Corrosion

    SBC: CENTER FOR REMOTE SENSING, INC.            Topic: N/A

    Corrosion of aircraft poses many problems including safety risks, higher maintenance costs, and reduced, operational effectiveness. Detection of corrosion on aircraft is difficult because corrosion often occurs in hidden places, requiring extended maintenance periods for disassembly. A corrosion detection system is proposed utilizing self contained sensors affixed to the aircraft. Novel sensors ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  10. HLA Federation Implementation Tools

    SBC: SYNETICS, INC.            Topic: N/A

    Developing a set of tools that is automated, integrated, and compliant with the deired goals of this SBIR is not a simple task. If a coordinated approach is not taken from the start, then a hodgepodge of tools and capabilities for a hodgepodge of environments wil be developed with unwanted outcome of falling short of the desired goals. Therefore, SYNETICS proposes to establish a CASE-like enviro ...

    SBIR Phase I 1997 Department of DefenseOffice of the Secretary of Defense
US Flag An Official Website of the United States Government